W3cubDocs

/Ansible 2.9

bigip_firewall_log_profile_network – Configures Network Firewall related settings of the log profile

Synopsis

  • Configures Network Firewall related settings of the log profile.

Parameters

Parameter Choices/Defaults Comments
log_format_delimiter
string
Specifies the delimiter string when using a log_storage_format of field-list.
When creating a new profile, if this parameter is not specified, the default value of , (the comma character) will be used.
This option is valid when the log_storage_format is set to field-list. It will be ignored otherwise.
Depending on the delimiter used, it may be necessary to wrap the delimiter in quotes to prevent YAML errors from occurring.
The special character $ should not be used, and will raise an error if used, as it is reserved for internal use.
The maximum length allowed for this parameter is 31 characters.
log_ip_errors
dictionary
Modify log settings for logging of IP error packets.
enabled
boolean
    Choices:
  • no
  • yes
This option is used to enable or disable the logging of IP error packets.
rate_limit
integer
This option is used to set rate limits for the logging of IP error packets.
This option is effective only if logging of this message type is enabled.
log_matches_accept_rule
dictionary
Modify log settings for ACL rules configured with an "accept" or "accept decisively" action.
enabled
boolean
    Choices:
  • no
  • yes
This option is used to enable or disable the logging of packets that match ACL rules configured with an "accept" or "accept decisively" action.
rate_limit
integer
This option is used to set rate limits for the logging of packets that match ACL rules configured with an "accept" or "accept decisively" action.
This option is effective only if logging of this message type is enabled.
log_matches_drop_rule
dictionary
Modify log settings for ACL rules configured with a drop action.
enabled
boolean
    Choices:
  • no
  • yes
This option is used to enable or disable the logging of packets that match ACL rules configured with a drop action.
rate_limit
integer
This option is used to set rate limits for the logging of packets that match ACL rules configured with a drop action.
This option is effective only if logging of this message type is enabled.
log_matches_reject_rule
dictionary
Modify log settings for ACL rules configured with a reject action.
enabled
boolean
    Choices:
  • no
  • yes
This option is used to enable or disable the logging of packets that match ACL rules configured with a reject action.
rate_limit
integer
This option is used to set rate limits for the logging of packets that match ACL rules configured with a reject action.
This option is effective only if logging of this message type is enabled.
log_message_fields
list
    Choices:
  • acl_policy_name
  • acl_policy_type
  • acl_rule_name
  • action
  • bigip_hostname
  • context_name
  • context_type
  • date_time
  • dest_fqdn
  • dest_geo
  • dest_ip
  • dest_port
  • drop_reason
  • management_ip_address
  • protocol
  • route_domain
  • sa_translation_pool
  • sa_translation_type
  • source_fqdn
  • source_user
  • src_geo
  • src_ip
  • src_port
  • translated_dest_ip
  • translated_dest_port
  • translated_ip_protocol
  • translated_route_domain
  • translated_src_ip
  • translated_src_port
  • translated_vlan
  • vlan
Specifies a set of fields to be logged.
This option is valid when the log_storage_format is set to field-list. It will be ignored otherwise.
The order of the list is important as the server displays the selected traffic items in the log sequentially according to it.
log_publisher
string
Specifies the name of the log publisher used for Network events.
To specify the log_publisher on a different partition from the AFM log profile, specify the name in fullpath format, e.g. /Foobar/log-publisher, otherwise the partition for log publisher is inferred from partition module parameter.
log_storage_format
string
    Choices:
  • field-list
  • none
Specifies the type of the storage format.
When creating a new log profile, if this parameter is not specified, the default is none.
When field-list, specifies that the log displays only the items you specify in the log_message_fields list with log_format_delimiter as the delimiter between the items.
When none, the messages will be logged in the default format, which is "management_ip_address", "bigip_hostname","context_type", "context_name","src_geo","src_ip", "dest_geo","dest_ip","src_port", "dest_port","vlan","protocol","route_domain", "translated_src_ip", "translated_dest_ip", "translated_src_port","translated_dest_port", "translated_vlan","translated_ip_protocol", "translated_route_domain", "acl_policy_type", "acl_policy_name","acl_rule_name","action", "drop_reason","sa_translation_type", "sa_translation_pool","flow_id", "source_user", "source_fqdn","dest_fqdn".
log_tcp_errors
dictionary
Modify log settings for logging of TCP error packets.
enabled
boolean
    Choices:
  • no
  • yes
This option is used to enable or disable the logging of TCP error packets.
rate_limit
integer
This option is used to set rate limits for the logging of TCP error packets.
This option is effective only if logging of this message type is enabled.
log_tcp_events
dictionary
Modify log settings for logging of TCP events on the client side.
enabled
boolean
    Choices:
  • no
  • yes
This option is used to enable or disable the logging of TCP events on the client side.
Only 'Established' and 'Closed' states of a TCP session are logged if this option is enabled.
rate_limit
integer
This option is used to set rate limits for the logging of TCP events on the client side.
This option is effective only if logging of this message type is enabled.
log_translation_fields
boolean
    Choices:
  • no
  • yes
This option is used to enable or disable the logging of translated (i.e server side) fields in ACL match and TCP events.
Translated fields include (but are not limited to) source address/port, destination address/port, IP protocol, route domain, and VLAN.
partition
string
Default:
"Common"
Device partition to create log profile on.
Parameter also used when specifying names for log publishers, unless log publisher names are in fullpath format.
profile_name
string / required
Specifies the name of the AFM log profile to be updated.
provider
dictionary
added in 2.5
A dict object containing connection details.
auth_provider
string
Configures the auth provider for to obtain authentication tokens from the remote device.
This option is really used when working with BIG-IQ devices.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
ssh_keyfile
path
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports.
You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • cli
  • rest
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
rate_limit
string
Defines a rate limit for all combined network firewall log messages per second. Beyond this rate limit, log messages are not logged.
To specify an indefinite rate, use the value indefinite.
If specifying a numeric rate, the value must be between 1 and 4294967295.
state
string
    Choices:
  • present
  • absent
When state is present, ensures the resource exists.
Only built-in profile that allows updating network log settings is global-network, attempts to do so on other built-in profiles will be ignored.
When state is absent, ensures that resource is removed.
The absent state is ignored for global-network log profile.

Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Add network settings to log profile
  bigip_firewall_log_profile_network:
    profile_name: barbaz
    rate_limit: 150000
    log_publisher: local-db-pub
    log_tcp_errors:
      enabled: yes
      rate_limit: 10000
    log_tcp_events:
      enabled: yes
      rate_limit: 40000
    log_storage_format: "field-list"
    log_message_fields:
      - vlan
      - translated_vlan
      - src_ip
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Change delimiter and log fields
  bigip_firewall_log_profile_network:
    profile_name: barbaz
    log_format_delimiter: '.'
    log_message_fields:
      - translated_dest_ip
      - translated_dest_port
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Modify built-in profile
  bigip_firewall_log_profile_network:
    profile_name: "global-network"
    log_publisher: "/foobar/log1"
    log_ip_errors:
      enabled: yes
      rate_limit: 60000
    log_matches_reject_rule:
      enabled: yes
      rate_limit: 2000
    log_translation_fields: yes
    log_storage_format: "field-list"
    log_format_delimiter: '.'
    log_message_fields:
      - protocol
      - dest_ip
      - dest_port
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove custom log profile network log settings
  bigip_firewall_log_profile_network:
    profile_name: "{{ log_profile }}"
    state: absent
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
log_format_delimiter
string
changed
The delimiter string when using a log_storage_format of field-list.

Sample:
.
log_ip_errors
complex
changed
Log settings for logging of IP error packets.

Sample:
hash/dictionary of values
enabled
boolean
changed
Enable or disable the logging of IP error packets.

Sample:
True
rate_limit
string
changed
The rate limit for the logging of IP error packets.

Sample:
indefinite
log_matches_accept_rule
complex
changed
Log settings for ACL rules configured with an "accept" or "accept decisively" action.

Sample:
hash/dictionary of values
enabled
boolean
changed
Enable or disable the logging of packets that match ACL rules.

Sample:
True
rate_limit
string
changed
The rate limit for the logging of packets that match ACL rules.

Sample:
indefinite
log_matches_drop_rule
complex
changed
Log settings for ACL rules configured with a drop action.

Sample:
hash/dictionary of values
enabled
boolean
changed
Enable or disable the logging of packets that match ACL rules.

Sample:
True
rate_limit
string
changed
The rate limit for the logging of packets that match ACL rules.

Sample:
indefinite
log_matches_reject_rule
complex
changed
Log settings for ACL rules configured with a reject action.

Sample:
hash/dictionary of values
enabled
boolean
changed
Enable or disable the logging of packets that match ACL rules.

Sample:
True
rate_limit
string
changed
The rate limit for the logging of packets that match ACL rules.

Sample:
indefinite
log_message_fields
list
changed
The delimiter string when using a log_storage_format of field-list.

Sample:
['acl_policy_name', 'acl_policy_type']
log_publisher
string
changed
The name of the log publisher used for Network events.

Sample:
/Common/log-publisher
log_storage_format
string
changed
The type of the storage format.

Sample:
field-list
log_tcp_errors
complex
changed
Log settings for logging of TCP error packets.

Sample:
hash/dictionary of values
enabled
boolean
changed
Enable or disable the logging of TCP error packets.

Sample:
True
rate_limit
string
changed
The rate limit for the logging of TCP error packets.

Sample:
indefinite
log_tcp_events
complex
changed
Log settings for logging of TCP events on the client side.

Sample:
hash/dictionary of values
enabled
boolean
changed
Enable or disable the logging of TCP events on the client side.

Sample:
True
rate_limit
string
changed
The rate limit for the logging of TCP events on the client side.

Sample:
indefinite
log_translation_fields
boolean
changed
Enable or disable the logging of translated (i.e server side) fields in ACL match and TCP events.

Sample:
True
rate_limit
string
changed
The rate limit for all combined network firewall log messages per second.

Sample:
indefinite


Status

Authors

  • Wojciech Wypior (@wojtek0806)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/bigip_firewall_log_profile_network_module.html