W3cubDocs

/Ansible 2.9

iosxr_lag_interfaces – Manages attributes of LAG/Ether-Bundle interfaces on IOS-XR devices

New in version 2.9.

Synopsis

  • This module manages the attributes of LAG/Ether-Bundle interfaces on IOS-XR devices.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A provided Link Aggregation Group (LAG) configuration.
links
dictionary
This dict contains configurable options related to LAG/Ether-Bundle links.
max_active
integer
Specifies the limit on the number of links that can be active in the LAG/Ether-Bundle.
Refer to vendor documentation for valid values.
min_active
integer
Specifies the minimum number of active links needed to bring up the LAG/Ether-Bundle.
Refer to vendor documentation for valid values.
load_balancing_hash
string
    Choices:
  • dst-ip
  • src-ip
Specifies the hash function used for traffic forwarded over the LAG/Ether-Bundle.
Option 'dst-ip' uses the destination IP as the hash function.
Option 'src-ip' uses the source IP as the hash function.
members
list / elements=dictionary
List of member interfaces for the LAG/Ether-Bundle.
member
string
Name of the member interface.
mode
string
    Choices:
  • on
  • active
  • passive
  • inherit
Specifies the mode of the operation for the member interface.
Mode 'active' runs LACP in active mode.
Mode 'on' does not run LACP over the port.
Mode 'passive' runs LACP in passive mode over the port.
Mode 'inherit' runs LACP as configured in the bundle.
mode
string
    Choices:
  • on
  • active
  • passive
LAG mode.
Mode 'active' runs LACP in active mode over the port.
Mode 'on' does not run LACP over the port.
Mode 'passive' runs LACP in passive mode over the port.
name
string / required
Name/Identifier of the LAG/Ether-Bundle to configure.
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
The state of the configuration after module completion.

Notes

Note

Examples

# Using merged
#
#
# ------------
# Before state
# ------------
#
# RP/0/0/CPU0:iosxr01#show run int
# Sun Jul  7 19:42:59.416 UTC
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description "GigabitEthernet - 1"
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#
#
- name: Merge provided configuration with device configuration
  iosxr_lag_interfaces:
    config:
      - name: Bundle-Ether10
        members:
          - member: GigabitEthernet0/0/0/1
            mode: inherit
          - member: GigabitEthernet0/0/0/3
            mode: inherit
        mode: active
        links:
          max_active: 5
          min_active: 2
        load_balancing_hash: src-ip

      - name: Bundle-Ether12
        members:
          - member: GigabitEthernet0/0/0/2
            mode: passive
          - member: GigabitEthernet0/0/0/4
            mode: passive
        load_balancing_hash: dst-ip
    state: merged
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:iosxr01#show run int
# Sun Jul  7 20:51:17.685 UTC
# interface Bundle-Ether10
#  lacp mode active
#  bundle load-balancing hash src-ip
#  bundle maximum-active links 5
#  bundle minimum-active links 2
# !
# interface Bundle-Ether12
#  bundle load-balancing hash dst-ip
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#   bundle id 12 mode passive
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
#  bundle id 12 mode passive
# !
#


# Using replaced
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/0/CPU0:iosxr01#sho run int
# Sun Jul  7 20:58:06.527 UTC
# interface Bundle-Ether10
#  lacp mode active
#  bundle load-balancing hash src-ip
#  bundle maximum-active links 5
#  bundle minimum-active links 2
# !
# interface Bundle-Ether12
#  bundle load-balancing hash dst-ip
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#  bundle id 12 mode passive
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
#  bundle id 12 mode passive
# !
#
#
- name: Replace device configuration of listed Bundles with provided configurations
  iosxr_lag_interfaces:
    config:
      - name: Bundle-Ether12
        members:
          - name: GigabitEthernet0/0/0/2
        mode: passive

      - name: Bundle-Ether11
        members:
          - name: GigabitEthernet0/0/0/4
        load_balancing_hash: src-ip
    state: replaced
#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:iosxr01#sh run int
# Sun Jul  7 21:22:27.397 UTC
# interface Bundle-Ether10
#  lacp mode active
#  bundle load-balancing hash src-ip
#  bundle maximum-active links 5
#  bundle minimum-active links 2
# !
# interface Bundle-Ether11
#  bundle load-balancing hash src-ip
# !
# interface Bundle-Ether12
#  lacp mode passive
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#  bundle id 12 mode on
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
#  bundle id 11 mode on
# !
#
#


# Using overridden
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:iosxr01#sh run int
# Sun Jul  7 21:22:27.397 UTC
# interface Bundle-Ether10
#  lacp mode active
#  bundle load-balancing hash src-ip
#  bundle maximum-active links 5
#  bundle minimum-active links 2
# !
# interface Bundle-Ether11
#  bundle load-balancing hash src-ip
# !
# interface Bundle-Ether12
#  lacp mode passive
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#  bundle id 12 mode on
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
#  bundle id 11 mode on
# !
#
#

- name: Overrides all device configuration with provided configuration
  iosxr_lag_interfaces:
    config:
      - name: Bundle-Ether10
        members:
          - member: GigabitEthernet0/0/0/1
            mode: inherit
          - member: GigabitEthernet0/0/0/2
            mode: inherit
        mode: active
        load_balancing_hash: dst-ip
    state: overridden
#
#
# ------------
# After state
# ------------
#
#
# RP/0/0/CPU0:iosxr01#sh run int
# Sun Jul  7 21:43:04.802 UTC
# interface Bundle-Ether10
#  lacp mode active
#  bundle load-balancing hash dst-ip
# !
# interface Bundle-Ether11
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#
#


# Using deleted
#
#
# ------------
# Before state
# ------------
#
# RP/0/0/CPU0:iosxr01#sh run int
# Sun Jul  7 21:22:27.397 UTC
# interface Bundle-Ether10
#  lacp mode active
#  bundle load-balancing hash src-ip
#  bundle maximum-active links 5
#  bundle minimum-active links 2
# !
# interface Bundle-Ether11
#  bundle load-balancing hash src-ip
# !
# interface Bundle-Ether12
#  lacp mode passive
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#  bundle id 12 mode on
# !n
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
#  bundle id 10 mode inherit
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
#  bundle id 11 mode on
# !
#
#

- name: Delete attributes of given bundles and removes member interfaces from them (Note - This won't delete the bundles themselves)
  iosxr_lag_interfaces:
    config:
      - name: Bundle-Ether10
      - name: Bundle-Ether11
      - name: Bundle-Ether12
    state: deleted

#
#
# ------------
# After state
# ------------
#
# RP/0/0/CPU0:iosxr01#sh run int
# Sun Jul  7 21:49:50.004 UTC
# interface Bundle-Ether10
# !
# interface Bundle-Ether11
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#
#

# Using deleted (without config)
#
#
# ------------
# Before state
# ------------
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Aug 18 19:49:51.908 UTC
# interface Bundle-Ether10
#  lacp mode active
#  bundle load-balancing hash src-ip
#  bundle maximum-active links 10
#  bundle minimum-active links 2
# !
# interface Bundle-Ether11
#  bundle load-balancing hash dst-ip
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
# !
# interface GigabitEthernet0/0/0/1
#  bundle id 10 mode inherit
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  bundle id 10 mode passive
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  bundle id 11 mode passive
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  bundle id 11 mode passive
#  shutdown
# !
#

- name: Delete attributes of all bundles and removes member interfaces from them (Note - This won't delete the bundles themselves)
  iosxr_lag_interfaces:
    state: deleted

#
#
# ------------
# After state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Aug 18 19:54:22.389 UTC
# interface Bundle-Ether10
# !
# interface Bundle-Ether11
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 10.8.38.69 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  shutdown
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
# !

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['interface Bundle-Ether10', 'bundle minimum-active links 2', 'bundle load-balancing hash src-ip']


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Nilashish Chakraborty (@NilashishC)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/iosxr_lag_interfaces_module.html