New in version 2.7.
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| bond_mode_10g - |
| Bond mode for 10GbE configuration. |
| bond_mode_1g - |
| Bond mode for 1GbE configuration. |
| dns_nameservers - | List of addresses for domain name servers. | |
| dns_search_domains - | List of DNS search domains. | |
| gateway_address_10g - / required | Router network address to send packets out of the local network. | |
| gateway_address_1g - / required | Router network address to send packets out of the local network. | |
| hostname - / required | The hostname or IP address of the SolidFire cluster. | |
| ip_address_10g - / required | IP address for the 10G network. | |
| ip_address_1g - / required | IP address for the 1G network. | |
| lacp_10g - |
| Link Aggregation Control Protocol useful only if LACP is selected as the Bond Mode. Slow - Packets are transmitted at 30 second intervals. Fast - Packets are transmitted in 1 second intervals. |
| lacp_1g - |
| Link Aggregation Control Protocol useful only if LACP is selected as the Bond Mode. Slow - Packets are transmitted at 30 second intervals. Fast - Packets are transmitted in 1 second intervals. |
| method - / required |
| Type of Method used to configure the interface. method depends on other settings such as the use of a static IP address, which will change the method to static. loopback - Used to define the IPv4 loopback interface. manual - Used to define interfaces for which no configuration is done by default. dhcp - May be used to obtain an IP address via DHCP. static - Used to define Ethernet interfaces with statically allocated IPv4 addresses. |
| mtu_10g - | Default: "1500" | Maximum Transmission Unit for 10GbE, Largest packet size that a network protocol can transmit. Must be greater than or equal to 1500 bytes. |
| mtu_1g - | Default: "1500" | Maximum Transmission Unit for 1GbE, Largest packet size that a network protocol can transmit. Must be greater than or equal to 1500 bytes. |
| password - / required | Password for the specified user. aliases: pass | |
| subnet_10g - / required | 10GbE Subnet Mask. | |
| subnet_1g - / required | 1GbE Subnet Mask. | |
| username - / required | Please ensure that the user has the adequate permissions. For more information, please read the official documentation https://mysupport.netapp.com/documentation/docweb/index.html?productID=62636&language=en-US. aliases: user | |
| virtual_network_tag - | This is the primary network tag. All nodes in a cluster have the same VLAN tag. |
Note
- name: Set Node network interfaces configuration for Bond 1G and 10G properties
tags:
- elementsw_network_interfaces
na_elementsw_network_interfaces:
hostname: "{{ elementsw_hostname }}"
username: "{{ elementsw_username }}"
password: "{{ elementsw_password }}"
method: static
ip_address_1g: 10.226.109.68
ip_address_10g: 10.226.201.72
subnet_1g: 255.255.255.0
subnet_10g: 255.255.255.0
gateway_address_1g: 10.193.139.1
gateway_address_10g: 10.193.140.1
mtu_1g: 1500
mtu_10g: 9000
bond_mode_1g: ActivePassive
bond_mode_10g: LACP
lacp_10g: Fast
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| msg string | success | Success message |
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/na_elementsw_network_interfaces_module.html