New in version 2.8.
member
objects using the Infoblox WAPI interface over REST.The below requirements are needed on the host that executes this module.
Parameter | Choices/Defaults | Comments | |||
---|---|---|---|---|---|
comment - | A descriptive comment of the Grid member. | ||||
config_addr_type - | Default: "IPV4" | Address configuration type (IPV4/IPV6/BOTH) | |||
create_token boolean |
| Flag for initiating a create token request for pre-provisioned members. | |||
enable_ha boolean |
| If set to True, the member has two physical nodes (HA pair). | |||
extattrs - | Extensible attributes associated with the object. | ||||
external_syslog_server_enable boolean |
| Determines if external syslog servers should be enabled | |||
host_name - / required | Specifies the host name of the member to either add or remove from the NIOS instance. aliases: name | ||||
ipv6_setting - / required | Configures the IPv6 settings for the grid member. | ||||
cidr_prefix - | The IPv6 CIDR prefix for the Grid Member | ||||
gateway - | The gateway address for the Grid Member | ||||
virtual_ip - | The IPv6 Address of the Grid Member | ||||
lan2_enabled boolean |
| When set to "true", the LAN2 port is enabled as an independent port or as a port for failover purposes. | |||
lan2_port_setting - | Settings for the Grid member LAN2 port if 'lan2_enabled' is set to "true". | ||||
enabled boolean |
| If set to True, then it has its own IP settings. | |||
network_setting - | If the 'enable' field is set to True, this defines IPv4 network settings for LAN2. | ||||
address - | The IPv4 Address of LAN2 | ||||
gateway - | The default gateway of LAN2 | ||||
subnet_mask - | The subnet mask of LAN2 | ||||
v6_network_setting - | If the 'enable' field is set to True, this defines IPv6 network settings for LAN2. | ||||
cidr_prefix - | The IPv6 CIDR prefix of LAN2 | ||||
gateway - | The gateway address of LAN2 | ||||
virtual_ip - | The IPv6 Address of LAN2 | ||||
mgmt_port_setting - | Settings for the member MGMT port. | ||||
enabled boolean |
| Determines if MGMT port settings should be enabled. | |||
security_access_enabled boolean |
| Determines if security access on the MGMT port is enabled or not. | |||
vpn_enabled boolean |
| Determines if VPN on the MGMT port is enabled or not. | |||
node_info - | Configures the node information list with detailed status report on the operations of the Grid Member. | ||||
lan2_physical_setting - | Physical port settings for the LAN2 interface. | ||||
auto_port_setting_enabled boolean |
| Enable or disalbe the auto port setting. | |||
duplex - | The port duplex; if speed is 1000, duplex must be FULL. | ||||
speed - | The port speed; if speed is 1000, duplex is FULL. | ||||
lan_ha_port_setting - | LAN/HA port settings for the node. | ||||
ha_ip_address - | HA IP address. | ||||
ha_port_setting - | Physical port settings for the HA interface. | ||||
auto_port_setting_enabled boolean |
| Enable or disalbe the auto port setting. | |||
duplex - | The port duplex; if speed is 1000, duplex must be FULL. | ||||
speed - | The port speed; if speed is 1000, duplex is FULL. | ||||
lan_port_setting - | Physical port settings for the LAN interface. | ||||
auto_port_setting_enabled boolean |
| Enable or disalbe the auto port setting. | |||
duplex - | The port duplex; if speed is 1000, duplex must be FULL. | ||||
speed - | The port speed; if speed is 1000, duplex is FULL. | ||||
mgmt_ipv6addr - | Public IPv6 address for the LAN1 interface. | ||||
mgmt_lan - | Public IPv4 address for the LAN1 interface. | ||||
mgmt_network_setting - | Network settings for the MGMT port of the node. | ||||
address - | The IPv4 Address of MGMT | ||||
gateway - | The default gateway of MGMT | ||||
subnet_mask - | The subnet mask of MGMT | ||||
v6_mgmt_network_setting - | The network settings for the IPv6 MGMT port of the node. | ||||
cidr_prefix - | The IPv6 CIDR prefix of MGMT | ||||
gateway - | The gateway address of MGMT | ||||
virtual_ip - | The IPv6 Address of MGMT | ||||
platform - | Default: "INFOBLOX" | Configures the Hardware Platform. | |||
pre_provisioning - | Pre-provisioning information. | ||||
hardware_info - | An array of structures that describe the hardware being pre-provisioned. | ||||
hwmodel - | Hardware model | ||||
hwtype - | Hardware type. | ||||
licenses - | An array of license types. | ||||
provider dictionary | A dict object containing connection details. | ||||
host string / required | Specifies the DNS host name or address for connecting to the remote instance of NIOS WAPI over REST Value can also be specified using INFOBLOX_HOST environment variable. | ||||
http_request_timeout integer | Default: 10 | The amount of time before to wait before receiving a response Value can also be specified using INFOBLOX_HTTP_REQUEST_TIMEOUT environment variable. | |||
max_results integer | Default: 1000 | Specifies the maximum number of objects to be returned, if set to a negative number the appliance will return an error when the number of returned objects would exceed the setting. Value can also be specified using INFOBLOX_MAX_RESULTS environment variable. | |||
max_retries integer | Default: 3 | Configures the number of attempted retries before the connection is declared usable Value can also be specified using INFOBLOX_MAX_RETRIES environment variable. | |||
password string | Specifies the password to use to authenticate the connection to the remote instance of NIOS. Value can also be specified using INFOBLOX_PASSWORD environment variable. | ||||
username string | Configures the username to use to authenticate the connection to the remote instance of NIOS. Value can also be specified using INFOBLOX_USERNAME environment variable. | ||||
validate_certs boolean |
| Boolean value to enable or disable verifying SSL certificates Value can also be specified using INFOBLOX_SSL_VERIFY environment variable.aliases: ssl_verify | |||
wapi_version string | Default: "2.1" | Specifies the version of WAPI to use Value can also be specified using INFOBLOX_WAP_VERSION environment variable.Until ansible 2.8 the default WAPI was 1.4 | |||
router_id - | Virtual router identifier. Provide this ID if "ha_enabled" is set to "true". This is a unique VRID number (from 1 to 255) for the local subnet. | ||||
state - |
| Configures the intended state of the instance of the object on the NIOS server. When this value is set to present , the object is configured on the device and when this value is set to absent the value is removed (if necessary) from the device. | |||
syslog_servers - | The list of external syslog servers. | ||||
address - | The server address. | ||||
category_list - | The list of all syslog logging categories. | ||||
connection_type - | Default: "UDP" | The connection type for communicating with this server.(STCP/TCP?UDP) | |||
local_interface - | Default: "ANY" | The local interface through which the appliance sends syslog messages to the syslog server.(ANY/LAN/MGMT) | |||
message_node_id - | Default: "LAN" | Identify the node in the syslog message. (HOSTNAME/IP_HOSTNAME/LAN/MGMT) | |||
message_source - | Default: "ANY" | The source of syslog messages to be sent to the external syslog server. | |||
only_category_list boolean |
| The list of selected syslog logging categories. The appliance forwards syslog messages that belong to the selected categories. | |||
port - | Default: 514 | The port this server listens on. | |||
severity - | Default: "DEBUG" | The severity filter. The appliance sends log messages of the specified severity and above to the external syslog server. | |||
upgrade_group - | Default: "Default" | The name of the upgrade group to which this Grid member belongs. | |||
use_syslog_proxy_setting boolean |
| Use flag for external_syslog_server_enable , syslog_servers, syslog_proxy_setting, syslog_size | |||
vip_setting - / required | Configures the network settings for the grid member. | ||||
address - | The IPv4 Address of the Grid Member | ||||
gateway - | The default gateway for the Grid Member | ||||
subnet_mask - | The subnet mask for the Grid Member |
Note
connection: local
.- name: add a member to the grid with IPv4 address nios_member: host_name: member01.localdomain vip_setting: - address: 192.168.1.100 subnet_mask: 255.255.255.0 gateway: 192.168.1.1 config_addr_type: IPV4 platform: VNIOS comment: "Created by Ansible" state: present provider: host: "{{ inventory_hostname_short }}" username: admin password: admin connection: local - name: add a HA member to the grid nios_member: host_name: memberha.localdomain vip_setting: - address: 192.168.1.100 subnet_mask: 255.255.255.0 gateway: 192.168.1.1 config_addr_type: IPV4 platform: VNIOS enable_ha: true router_id: 150 node_info: - lan_ha_port_setting: - ha_ip_address: 192.168.1.70 mgmt_lan: 192.168.1.80 - lan_ha_port_setting: - ha_ip_address: 192.168.1.71 mgmt_lan: 192.168.1.81 comment: "Created by Ansible" state: present provider: host: "{{ inventory_hostname_short }}" username: admin password: admin connection: local - name: update the member with pre-provisioning details specified nios_member: name: member01.localdomain pre_provisioning: - hardware_info: - hwmodel: IB-VM-820 hwtype: IB-VNIOS licenses: - dns - dhcp - enterprise - vnios comment: "Updated by Ansible" state: present provider: host: "{{ inventory_hostname_short }}" username: admin password: admin connection: local - name: remove the member nios_member: name: member01.localdomain state: absent provider: host: "{{ inventory_hostname_short }}" username: admin password: admin connection: local
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/nios_member_module.html