W3cubDocs

/Ansible 2.9

ovirt_vmpool – Module to manage VM pools in oVirt/RHV

Synopsis

  • Module to manage VM pools in oVirt/RHV.

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 2.7
  • ovirt-engine-sdk-python >= 4.3.0

Parameters

Parameter Choices/Defaults Comments
auth
dictionary / required
Dictionary with values needed to create HTTP/HTTPS connection to oVirt:
ca_file
string
A PEM file containing the trusted CA certificates.
The certificate presented by the server will be verified using these CA certificates.
If ca_file parameter is not set, system wide CA certificate store is used.
Default value is set by OVIRT_CAFILE environment variable.
headers
dictionary
Dictionary of HTTP headers to be added to each API call.
hostname
string
A string containing the hostname of the server, usually something like `server.example.com`.
Default value is set by OVIRT_HOSTNAME environment variable.
Either url or hostname is required.
insecure
boolean
    Choices:
  • no
  • yes
A boolean flag that indicates if the server TLS certificate and host name should be checked.
kerberos
boolean
    Choices:
  • no
  • yes
A boolean flag indicating if Kerberos authentication should be used instead of the default basic authentication.
password
string / required
The password of the user.
Default value is set by OVIRT_PASSWORD environment variable.
token
string
Token to be used instead of login with username/password.
Default value is set by OVIRT_TOKEN environment variable.
url
string
A string containing the API URL of the server, usually something like `https://server.example.com/ovirt-engine/api`.
Default value is set by OVIRT_URL environment variable.
Either url or hostname is required.
username
string / required
The name of the user, something like admin@internal.
Default value is set by OVIRT_USERNAME environment variable.
cluster
-
Name of the cluster, where VM pool should be created.
comment
-
Comment of the Virtual Machine pool.
description
-
Description of the VM pool.
fetch_nested
boolean
    Choices:
  • no
  • yes
If True the module will fetch additional data from the API.
It will fetch IDs of the VMs disks, snapshots, etc. User can configure to fetch other attributes of the nested entities by specifying nested_attributes.
id
-
added in 2.8
ID of the vmpool to manage.
name
- / required
Name of the VM pool to manage.
nested_attributes
list
Specifies list of the attributes which should be fetched from the API.
This parameter apply only when fetch_nested is true.
poll_interval
integer
Default:
3
Number of the seconds the module waits until another poll request on entity status is sent.
prestarted
-
Number of pre-started VMs defines the number of VMs in run state, that are waiting to be attached to Users.
Default value is set by engine.
state
-
    Choices:
  • present
  • absent
Should the VM pool be present/absent.
Note that when state is absent all VMs in VM pool are stopped and removed.
template
-
Name of the template, which will be used to create VM pool.
timeout
integer
Default:
180
The amount of time in seconds the module should wait for the instance to get into desired state.
type
-
    Choices:
  • manual
  • automatic
Type of the VM pool. Either manual or automatic.
manual - The administrator is responsible for explicitly returning the virtual machine to the pool. The virtual machine reverts to the original base image after the administrator returns it to the pool.
Automatic - When the virtual machine is shut down, it automatically reverts to its base image and is returned to the virtual machine pool.
Default value is set by engine.
vm
dictionary
added in 2.9
For creating vm pool without editing template.
Note: You can use vm only for creating vm pool.
cloud_init
-
Dictionary with values for Unix-like Virtual Machine initialization using cloud init.
host_name - Hostname to be set to Virtual Machine when deployed.
timezone - Timezone to be set to Virtual Machine when deployed.
user_name - Username to be used to set password to Virtual Machine when deployed.
root_password - Password to be set for user specified by user_name parameter.
authorized_ssh_keys - Use this SSH keys to login to Virtual Machine.
regenerate_ssh_keys - If True SSH keys will be regenerated on Virtual Machine.
custom_script - Cloud-init script which will be executed on Virtual Machine when deployed. This is appended to the end of the cloud-init script generated by any other options.
dns_servers - DNS servers to be configured on Virtual Machine.
dns_search - DNS search domains to be configured on Virtual Machine.
nic_boot_protocol - Set boot protocol of the network interface of Virtual Machine. Can be one of none, dhcp or static.
nic_ip_address - If boot protocol is static, set this IP address to network interface of Virtual Machine.
nic_netmask - If boot protocol is static, set this netmask to network interface of Virtual Machine.
nic_gateway - If boot protocol is static, set this gateway to network interface of Virtual Machine.
nic_name - Set name to network interface of Virtual Machine.
nic_on_boot - If True network interface will be set to start on boot.
comment
-
Comment of the Virtual Machine.
memory
-
Amount of memory of the Virtual Machine. Prefix uses IEC 60027-2 standard (for example 1GiB, 1024MiB).
Default value is set by engine.
memory_guaranteed
-
Amount of minimal guaranteed memory of the Virtual Machine. Prefix uses IEC 60027-2 standard (for example 1GiB, 1024MiB).
memory_guaranteed parameter can't be lower than memory parameter.
Default value is set by engine.
memory_max
-
Upper bound of virtual machine memory up to which memory hot-plug can be performed. Prefix uses IEC 60027-2 standard (for example 1GiB, 1024MiB).
Default value is set by engine.
nics
-
List of NICs, which should be attached to Virtual Machine. NIC is described by following dictionary.
name - Name of the NIC.
profile_name - Profile name where NIC should be attached.
interface - Type of the network interface. One of following virtio, e1000, rtl8139, default is virtio.
mac_address - Custom MAC address of the network interface, by default it's obtained from MAC pool.
NOTE - This parameter is used only when state is running or present and is able to only create NICs.
To manage NICs of the VM in more depth please use ovirt_nics module instead.
smartcard_enabled
boolean
    Choices:
  • no
  • yes
If true, use smart card authentication.
sso
boolean
    Choices:
  • no
  • yes
True enable Single Sign On by Guest Agent, False to disable it. By default is chosen by oVirt/RHV engine.
timezone
-
Sets time zone offset of the guest hardware clock.
For example Etc/GMT
vm_count
-
Number of VMs in the pool.
Default value is set by engine.
vm_per_user
-
Maximum number of VMs a single user can attach to from this pool.
Default value is set by engine.
wait
boolean
    Choices:
  • no
  • yes
yes if the module should wait for the entity to get into desired state.

Notes

Note

  • In order to use this module you have to install oVirt Python SDK. To ensure it’s installed with correct version you can create the following task: pip: name=ovirt-engine-sdk-python version=4.3.0

Examples

# Examples don't contain auth parameter for simplicity,
# look at ovirt_auth module to see how to reuse authentication:

- name: Create VM pool from template
  ovirt_vmpool:
    cluster: mycluster
    name: myvmpool
    template: rhel7
    vm_count: 2
    prestarted: 2
    vm_per_user: 1

- name: Remove vmpool, note that all VMs in pool will be stopped and removed
  ovirt_vmpool:
    state: absent
    name: myvmpool

- name: Change Pool Name
  ovirt_vmpool:
    id: 00000000-0000-0000-0000-000000000000
    name: "new_pool_name"

- name: Create vm pool and override the pool values
  ovirt_vmpool:
    cluster: mycluster
    name: vmpool
    template: blank
    vm_count: 2
    prestarted: 1
    vm_per_user: 1
    vm:
      memory: 4GiB
      memory_guaranteed: 4GiB
      memory_max: 10GiB
      comment: vncomment
      cloud_init:
        nic_boot_protocol: static
        nic_ip_address: 10.34.60.86
        nic_netmask: 255.255.252.0
        nic_gateway: 10.34.63.254
        nic_name: eth1
        nic_on_boot: true
        host_name: example.com
        custom_script: |
          write_files:
           - content: |
               Hello, world!
             path: /tmp/greeting.txt
             permissions: '0644'
        user_name: root
        root_password: super_password
      nics:
        - name: nicname
          interface: virtio
          profile_name: network

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
id
string
On success if VM pool is found.
ID of the VM pool which is managed

Sample:
7de90f31-222c-436c-a1ca-7e655bd5b60c
vm_pool
dictionary
On success if VM pool is found.
Dictionary of all the VM pool attributes. VM pool attributes can be found on your oVirt/RHV instance at following url: http://ovirt.github.io/ovirt-engine-api-model/master/#types/vm_pool.



Status

Authors

  • Ondra Machacek (@machacekondra)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ovirt_vmpool_module.html