W3cubDocs

/Ansible 2.9

vyos_lag_interfaces – Manages attributes of link aggregation groups on VyOS network devices

Synopsis

  • This module manages attributes of link aggregation groups on VyOS network devices.

Parameters

Parameter Choices/Defaults Comments
config
list
A list of link aggregation group configurations.
arp_monitor
dictionary
ARP Link monitoring parameters.
interval
integer
ARP link monitoring frequency in milliseconds.
target
list
IP address to use for ARP monitoring.
hash_policy
string
    Choices:
  • layer2
  • layer2+3
  • layer3+4
LAG or bonding transmit hash policy.
members
list
List of member interfaces for the LAG (bond).
member
string
Name of the member interface.
mode
string
    Choices:
  • 802.3ad
  • active-backup
  • broadcast
  • round-robin
  • transmit-load-balance
  • adaptive-load-balance
  • xor-hash
LAG or bond mode.
name
string / required
Name of the link aggregation group (LAG) or bond.
primary
string
Primary device interfaces for the LAG (bond).
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
The state of the configuration after module completion.

Notes

Note

Examples

# Using merged
#
# Before state:
# -------------
#
# [email protected]:~$ show configuration  commands | grep bond
# set interfaces bonding bond2
# set interfaces bonding bond3
#
- name: Merge provided configuration with device configuration
  vyos_lag_interfaces:
    config:
      - name: bond2
        mode: active-backup
        members:
         - member: eth2
         - member: eth1
        hash_policy: layer2
        primary: eth2

      - name: 'bond3'
        mode: 'active-backup'
        hash_policy: 'layer2+3'
        members:
         - member: eth3
        primary: 'eth3'
    state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "name": "bond2"
#        },
#        {
#            "name": "bond3"
#        }
#    ],
#
# "commands": [
#        "set interfaces bonding bond2 hash-policy 'layer2'",
#        "set interfaces bonding bond2 mode 'active-backup'",
#        "set interfaces ethernet eth2 bond-group bond2",
#        "set interfaces ethernet eth1 bond-group bond2",
#        "set interfaces bonding bond2 primary 'eth2'",
#        "set interfaces bonding bond3 hash-policy 'layer2+3'",
#        "set interfaces bonding bond3 mode 'active-backup'",
#        "set interfaces ethernet eth3 bond-group bond3",
#        "set interfaces bonding bond3 primary 'eth3'"
#    ]
#
#     "after": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2+3",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ]
#
# After state:
# -------------
#
# [email protected]:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2+3'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'


# Using replaced
#
# Before state:
# -------------
#
# [email protected]:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2+3'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'
#
- name: Replace device configurations of listed LAGs with provided configurations
  vyos_lag_interfaces:
    config:
      - name: bond3
        mode: '802.3ad'
        hash_policy: 'layer2'
        members:
         - member: eth3
    state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2+3",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ],
#
# "commands": [
#        "delete interfaces bonding bond3 primary",
#        "set interfaces bonding bond3 hash-policy 'layer2'",
#        "set interfaces bonding bond3 mode '802.3ad'"
#    ],
#
# "after": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "802.3ad",
#            "name": "bond3"
#        }
#    ],
#
# After state:
# -------------
#
# [email protected]:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2'
# set interfaces bonding bond3 mode '802.3ad'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'


# Using overridden
#
# Before state
# --------------
#
# [email protected]:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2'
# set interfaces bonding bond3 mode '802.3ad'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'
#
- name: Overrides all device configuration with provided configuration
  vyos_lag_interfaces:
    config:
      - name: bond3
        mode: active-backup
        members:
         - member: eth1
         - member: eth2
         - member: eth3
        primary: eth3
        hash_policy: layer2
    state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "802.3ad",
#            "name": "bond3"
#        }
#    ],
#
#    "commands": [
#        "delete interfaces bonding bond2 hash-policy",
#        "delete interfaces ethernet eth1 bond-group bond2",
#        "delete interfaces ethernet eth2 bond-group bond2",
#        "delete interfaces bonding bond2 mode",
#        "delete interfaces bonding bond2 primary",
#        "set interfaces bonding bond3 mode 'active-backup'",
#        "set interfaces ethernet eth1 bond-group bond3",
#        "set interfaces ethernet eth2 bond-group bond3",
#        "set interfaces bonding bond3 primary 'eth3'"
#    ],
#
# "after": [
#        {
#            "name": "bond2"
#        },
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                },
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ],
#
#
# After state
# ------------
#
# [email protected]:~$ show configuration  commands | grep bond
# set interfaces bonding bond2
# set interfaces bonding bond3 hash-policy 'layer2'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond3'
# set interfaces ethernet eth2 bond-group 'bond3'
# set interfaces ethernet eth3 bond-group 'bond3'


# Using deleted
#
# Before state
# -------------
#
# [email protected]:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2+3'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'
#
- name: Delete LAG attributes of given interfaces (Note This won't delete the interface itself)
  vyos_lag_interfaces:
    config:
      - name: bond2
      - name: bond3
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
# "before": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2+3",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ],
# "commands": [
#        "delete interfaces bonding bond2 hash-policy",
#        "delete interfaces ethernet eth1 bond-group bond2",
#        "delete interfaces ethernet eth2 bond-group bond2",
#        "delete interfaces bonding bond2 mode",
#        "delete interfaces bonding bond2 primary",
#        "delete interfaces bonding bond3 hash-policy",
#        "delete interfaces ethernet eth3 bond-group bond3",
#        "delete interfaces bonding bond3 mode",
#        "delete interfaces bonding bond3 primary"
#    ],
#
# "after": [
#        {
#            "name": "bond2"
#        },
#        {
#            "name": "bond3"
#        }
#    ],
#
# After state
# ------------
# [email protected]:~$ show configuration  commands | grep bond
# set interfaces bonding bond2
# set interfaces bonding bond3

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['set interfaces bonding bond2', 'set interfaces bonding bond2 hash-policy layer2']


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Rohit Thakur (@rohitthakur2590)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/vyos_lag_interfaces_module.html