W3cubDocs

/Kubernetes

Configure a Pod to Use a ConfigMap

ConfigMaps allow you to decouple configuration artifacts from image content to keep containerized applications portable. This page provides a series of usage examples demonstrating how to create ConfigMaps and configure Pods using data stored in ConfigMaps.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

To check the version, enter kubectl version.

Create a ConfigMap

You can use either kubectl create configmap or a ConfigMap generator in kustomization.yaml to create a ConfigMap. Note that kubectl starts to support kustomization.yaml since 1.14.

Create a ConfigMap Using kubectl create configmap

Use the kubectl create configmap command to create ConfigMaps from directories, files, or literal values:

kubectl create configmap <map-name> <data-source>

where <map-name> is the name you want to assign to the ConfigMap and <data-source> is the directory, file, or literal value to draw the data from. The name of a ConfigMap object must be a valid DNS subdomain name.

When you are creating a ConfigMap based on a file, the key in the <data-source> defaults to the basename of the file, and the value defaults to the file content.

You can use kubectl describe or kubectl get to retrieve information about a ConfigMap.

Create ConfigMaps from directories

You can use kubectl create configmap to create a ConfigMap from multiple files in the same directory. When you are creating a ConfigMap based on a directory, kubectl identifies files whose basename is a valid key in the directory and packages each of those files into the new ConfigMap. Any directory entries except regular files are ignored (e.g. subdirectories, symlinks, devices, pipes, etc).

For example:

# Create the local directory
mkdir -p configure-pod-container/configmap/

# Download the sample files into `configure-pod-container/configmap/` directory
wget https://kubernetes.io/examples/configmap/game.properties -O configure-pod-container/configmap/game.properties
wget https://kubernetes.io/examples/configmap/ui.properties -O configure-pod-container/configmap/ui.properties

# Create the configmap
kubectl create configmap game-config --from-file=configure-pod-container/configmap/

The above command packages each file, in this case, game.properties and ui.properties in the configure-pod-container/configmap/ directory into the game-config ConfigMap. You can display details of the ConfigMap using the following command:

kubectl describe configmaps game-config

The output is similar to this:

Name:         game-config
Namespace:    default
Labels:       <none>
Annotations:  <none>

Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
ui.properties:
----
color.good=purple
color.bad=yellow
allow.textmode=true
how.nice.to.look=fairlyNice

The game.properties and ui.properties files in the configure-pod-container/configmap/ directory are represented in the data section of the ConfigMap.

kubectl get configmaps game-config -o yaml

The output is similar to this:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2016-02-18T18:52:05Z
  name: game-config
  namespace: default
  resourceVersion: "516"
  uid: b4952dc3-d670-11e5-8cd0-68f728db1985
data:
  game.properties: |
    enemies=aliens
    lives=3
    enemies.cheat=true
    enemies.cheat.level=noGoodRotten
    secret.code.passphrase=UUDDLRLRBABAS
    secret.code.allowed=true
    secret.code.lives=30    
  ui.properties: |
    color.good=purple
    color.bad=yellow
    allow.textmode=true
    how.nice.to.look=fairlyNice    

Create ConfigMaps from files

You can use kubectl create configmap to create a ConfigMap from an individual file, or from multiple files.

For example,

kubectl create configmap game-config-2 --from-file=configure-pod-container/configmap/game.properties

would produce the following ConfigMap:

kubectl describe configmaps game-config-2

where the output is similar to this:

Name:         game-config-2
Namespace:    default
Labels:       <none>
Annotations:  <none>

Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30

You can pass in the --from-file argument multiple times to create a ConfigMap from multiple data sources.

kubectl create configmap game-config-2 --from-file=configure-pod-container/configmap/game.properties --from-file=configure-pod-container/configmap/ui.properties

You can display details of the game-config-2 ConfigMap using the following command:

kubectl describe configmaps game-config-2

The output is similar to this:

Name:         game-config-2
Namespace:    default
Labels:       <none>
Annotations:  <none>

Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
ui.properties:
----
color.good=purple
color.bad=yellow
allow.textmode=true
how.nice.to.look=fairlyNice

When kubectl creates a ConfigMap from inputs that are not ASCII or UTF-8, the tool puts these into the binaryData field of the ConfigMap, and not in data. Both text and binary data sources can be combined in one ConfigMap. If you want to view the binaryData keys (and their values) in a ConfigMap, you can run kubectl get configmap -o jsonpath='{.binaryData}' <name>.

Use the option --from-env-file to create a ConfigMap from an env-file, for example:

# Env-files contain a list of environment variables.
# These syntax rules apply:
#   Each line in an env file has to be in VAR=VAL format.
#   Lines beginning with # (i.e. comments) are ignored.
#   Blank lines are ignored.
#   There is no special handling of quotation marks (i.e. they will be part of the ConfigMap value)).

# Download the sample files into `configure-pod-container/configmap/` directory
wget https://kubernetes.io/examples/configmap/game-env-file.properties -O configure-pod-container/configmap/game-env-file.properties

# The env-file `game-env-file.properties` looks like below
cat configure-pod-container/configmap/game-env-file.properties
enemies=aliens
lives=3
allowed="true"

# This comment and the empty line above it are ignored
kubectl create configmap game-config-env-file \
       --from-env-file=configure-pod-container/configmap/game-env-file.properties

would produce the following ConfigMap:

kubectl get configmap game-config-env-file -o yaml

where the output is similar to this:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2017-12-27T18:36:28Z
  name: game-config-env-file
  namespace: default
  resourceVersion: "809965"
  uid: d9d1ca5b-eb34-11e7-887b-42010a8002b8
data:
  allowed: '"true"'
  enemies: aliens
  lives: "3"

The behavior of passing --from-env-file multiple times is demonstrated by:

# Download the sample files into `configure-pod-container/configmap/` directory
wget https://kubernetes.io/examples/configmap/ui-env-file.properties -O configure-pod-container/configmap/ui-env-file.properties

# Create the configmap
kubectl create configmap config-multi-env-files \
        --from-env-file=configure-pod-container/configmap/game-env-file.properties \
        --from-env-file=configure-pod-container/configmap/ui-env-file.properties

would produce the following ConfigMap:

kubectl get configmap config-multi-env-files -o yaml

where the output is similar to this:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2017-12-27T18:38:34Z
  name: config-multi-env-files
  namespace: default
  resourceVersion: "810136"
  uid: 252c4572-eb35-11e7-887b-42010a8002b8
data:
  color: purple
  how: fairlyNice
  textmode: "true"

Define the key to use when creating a ConfigMap from a file

You can define a key other than the file name to use in the data section of your ConfigMap when using the --from-file argument:

kubectl create configmap game-config-3 --from-file=<my-key-name>=<path-to-file>

where <my-key-name> is the key you want to use in the ConfigMap and <path-to-file> is the location of the data source file you want the key to represent.

For example:

kubectl create configmap game-config-3 --from-file=game-special-key=configure-pod-container/configmap/game.properties

would produce the following ConfigMap:

kubectl get configmaps game-config-3 -o yaml

where the output is similar to this:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2016-02-18T18:54:22Z
  name: game-config-3
  namespace: default
  resourceVersion: "530"
  uid: 05f8da22-d671-11e5-8cd0-68f728db1985
data:
  game-special-key: |
    enemies=aliens
    lives=3
    enemies.cheat=true
    enemies.cheat.level=noGoodRotten
    secret.code.passphrase=UUDDLRLRBABAS
    secret.code.allowed=true
    secret.code.lives=30    

Create ConfigMaps from literal values

You can use kubectl create configmap with the --from-literal argument to define a literal value from the command line:

kubectl create configmap special-config --from-literal=special.how=very --from-literal=special.type=charm

You can pass in multiple key-value pairs. Each pair provided on the command line is represented as a separate entry in the data section of the ConfigMap.

kubectl get configmaps special-config -o yaml

The output is similar to this:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2016-02-18T19:14:38Z
  name: special-config
  namespace: default
  resourceVersion: "651"
  uid: dadce046-d673-11e5-8cd0-68f728db1985
data:
  special.how: very
  special.type: charm

Create a ConfigMap from generator

kubectl supports kustomization.yaml since 1.14. You can also create a ConfigMap from generators and then apply it to create the object on the Apiserver. The generators should be specified in a kustomization.yaml inside a directory.

Generate ConfigMaps from files

For example, to generate a ConfigMap from files configure-pod-container/configmap/game.properties

# Create a kustomization.yaml file with ConfigMapGenerator
cat <<EOF >./kustomization.yaml
configMapGenerator:
- name: game-config-4
  files:
  - configure-pod-container/configmap/game.properties
EOF

Apply the kustomization directory to create the ConfigMap object.

kubectl apply -k .
configmap/game-config-4-m9dm2f92bt created

You can check that the ConfigMap was created like this:

kubectl get configmap
NAME                       DATA   AGE
game-config-4-m9dm2f92bt   1      37s


kubectl describe configmaps/game-config-4-m9dm2f92bt
Name:         game-config-4-m9dm2f92bt
Namespace:    default
Labels:       <none>
Annotations:  kubectl.kubernetes.io/last-applied-configuration:
                {"apiVersion":"v1","data":{"game.properties":"enemies=aliens\nlives=3\nenemies.cheat=true\nenemies.cheat.level=noGoodRotten\nsecret.code.p...

Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
Events:  <none>

Note that the generated ConfigMap name has a suffix appended by hashing the contents. This ensures that a new ConfigMap is generated each time the content is modified.

Define the key to use when generating a ConfigMap from a file

You can define a key other than the file name to use in the ConfigMap generator. For example, to generate a ConfigMap from files configure-pod-container/configmap/game.properties with the key game-special-key

# Create a kustomization.yaml file with ConfigMapGenerator
cat <<EOF >./kustomization.yaml
configMapGenerator:
- name: game-config-5
  files:
  - game-special-key=configure-pod-container/configmap/game.properties
EOF

Apply the kustomization directory to create the ConfigMap object.

kubectl apply -k .
configmap/game-config-5-m67dt67794 created

Generate ConfigMaps from Literals

To generate a ConfigMap from literals special.type=charm and special.how=very, you can specify the ConfigMap generator in kustomization.yaml as

# Create a kustomization.yaml file with ConfigMapGenerator
cat <<EOF >./kustomization.yaml
configMapGenerator:
- name: special-config-2
  literals:
  - special.how=very
  - special.type=charm
EOF

Apply the kustomization directory to create the ConfigMap object.

kubectl apply -k .
configmap/special-config-2-c92b5mmcf2 created

Define container environment variables using ConfigMap data

Define a container environment variable with data from a single ConfigMap

  1. Define an environment variable as a key-value pair in a ConfigMap:

    kubectl create configmap special-config --from-literal=special.how=very
    
  2. Assign the special.how value defined in the ConfigMap to the SPECIAL_LEVEL_KEY environment variable in the Pod specification.

pods/pod-single-configmap-env-variable.yaml
apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: k8s.gcr.io/busybox
      command: [ "/bin/sh", "-c", "env" ]
      env:
        # Define the environment variable
        - name: SPECIAL_LEVEL_KEY
          valueFrom:
            configMapKeyRef:
              # The ConfigMap containing the value you want to assign to SPECIAL_LEVEL_KEY
              name: special-config
              # Specify the key associated with the value
              key: special.how
  restartPolicy: Never

Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-single-configmap-env-variable.yaml

Now, the Pod's output includes environment variable SPECIAL_LEVEL_KEY=very.

Define container environment variables with data from multiple ConfigMaps

  • As with the previous example, create the ConfigMaps first.

    configmap/configmaps.yaml
    apiVersion: v1
    kind: ConfigMap
    metadata:
      name: special-config
      namespace: default
    data:
      special.how: very
    ---
    apiVersion: v1
    kind: ConfigMap
    metadata:
      name: env-config
      namespace: default
    data:
      log_level: INFO
    

    Create the ConfigMap:

kubectl create -f https://kubernetes.io/examples/configmap/configmaps.yaml
  • Define the environment variables in the Pod specification.

    pods/pod-multiple-configmap-env-variable.yaml
    apiVersion: v1
    kind: Pod
    metadata:
      name: dapi-test-pod
    spec:
      containers:
        - name: test-container
          image: k8s.gcr.io/busybox
          command: [ "/bin/sh", "-c", "env" ]
          env:
            - name: SPECIAL_LEVEL_KEY
              valueFrom:
                configMapKeyRef:
                  name: special-config
                  key: special.how
            - name: LOG_LEVEL
              valueFrom:
                configMapKeyRef:
                  name: env-config
                  key: log_level
      restartPolicy: Never
    

    Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-multiple-configmap-env-variable.yaml

Now, the Pod's output includes environment variables SPECIAL_LEVEL_KEY=very and LOG_LEVEL=INFO.

Configure all key-value pairs in a ConfigMap as container environment variables

  • Create a ConfigMap containing multiple key-value pairs.

    configmap/configmap-multikeys.yaml
    apiVersion: v1
    kind: ConfigMap
    metadata:
      name: special-config
      namespace: default
    data:
      SPECIAL_LEVEL: very
      SPECIAL_TYPE: charm
    

    Create the ConfigMap:

kubectl create -f https://kubernetes.io/examples/configmap/configmap-multikeys.yaml
  • Use envFrom to define all of the ConfigMap's data as container environment variables. The key from the ConfigMap becomes the environment variable name in the Pod.
pods/pod-configmap-envFrom.yaml
apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: k8s.gcr.io/busybox
      command: [ "/bin/sh", "-c", "env" ]
      envFrom:
      - configMapRef:
          name: special-config
  restartPolicy: Never

Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-envFrom.yaml

Now, the Pod's output includes environment variables SPECIAL_LEVEL=very and SPECIAL_TYPE=charm.

Use ConfigMap-defined environment variables in Pod commands

You can use ConfigMap-defined environment variables in the command and args of a container using the $(VAR_NAME) Kubernetes substitution syntax.

For example, the following Pod specification

pods/pod-configmap-env-var-valueFrom.yaml
apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: k8s.gcr.io/busybox
      command: [ "/bin/echo", "$(SPECIAL_LEVEL_KEY) $(SPECIAL_TYPE_KEY)" ]
      env:
        - name: SPECIAL_LEVEL_KEY
          valueFrom:
            configMapKeyRef:
              name: special-config
              key: SPECIAL_LEVEL
        - name: SPECIAL_TYPE_KEY
          valueFrom:
            configMapKeyRef:
              name: special-config
              key: SPECIAL_TYPE
  restartPolicy: Never

created by running

kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-env-var-valueFrom.yaml

produces the following output in the test-container container:

very charm

Add ConfigMap data to a Volume

As explained in Create ConfigMaps from files, when you create a ConfigMap using --from-file, the filename becomes a key stored in the data section of the ConfigMap. The file contents become the key's value.

The examples in this section refer to a ConfigMap named special-config, shown below.

configmap/configmap-multikeys.yaml
apiVersion: v1
kind: ConfigMap
metadata:
  name: special-config
  namespace: default
data:
  SPECIAL_LEVEL: very
  SPECIAL_TYPE: charm

Create the ConfigMap:

kubectl create -f https://kubernetes.io/examples/configmap/configmap-multikeys.yaml

Populate a Volume with data stored in a ConfigMap

Add the ConfigMap name under the volumes section of the Pod specification. This adds the ConfigMap data to the directory specified as volumeMounts.mountPath (in this case, /etc/config). The command section lists directory files with names that match the keys in ConfigMap.

pods/pod-configmap-volume.yaml
apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: k8s.gcr.io/busybox
      command: [ "/bin/sh", "-c", "ls /etc/config/" ]
      volumeMounts:
      - name: config-volume
        mountPath: /etc/config
  volumes:
    - name: config-volume
      configMap:
        # Provide the name of the ConfigMap containing the files you want
        # to add to the container
        name: special-config
  restartPolicy: Never

Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-volume.yaml

When the pod runs, the command ls /etc/config/ produces the output below:

SPECIAL_LEVEL
SPECIAL_TYPE

Add ConfigMap data to a specific path in the Volume

Use the path field to specify the desired file path for specific ConfigMap items. In this case, the SPECIAL_LEVEL item will be mounted in the config-volume volume at /etc/config/keys.

pods/pod-configmap-volume-specific-key.yaml
apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: k8s.gcr.io/busybox
      command: [ "/bin/sh","-c","cat /etc/config/keys" ]
      volumeMounts:
      - name: config-volume
        mountPath: /etc/config
  volumes:
    - name: config-volume
      configMap:
        name: special-config
        items:
        - key: SPECIAL_LEVEL
          path: keys
  restartPolicy: Never

Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-volume-specific-key.yaml

When the pod runs, the command cat /etc/config/keys produces the output below:

very

Project keys to specific paths and file permissions

You can project keys to specific paths and specific permissions on a per-file basis. The Secrets user guide explains the syntax.

Optional References

A ConfigMap reference may be marked "optional". If the ConfigMap is non-existent, the mounted volume will be empty. If the ConfigMap exists, but the referenced key is non-existent the path will be absent beneath the mount point.

Mounted ConfigMaps are updated automatically

When a mounted ConfigMap is updated, the projected content is eventually updated too. This applies in the case where an optionally referenced ConfigMap comes into existence after a pod has started.

Kubelet checks whether the mounted ConfigMap is fresh on every periodic sync. However, it uses its local TTL-based cache for getting the current value of the ConfigMap. As a result, the total delay from the moment when the ConfigMap is updated to the moment when new keys are projected to the pod can be as long as kubelet sync period (1 minute by default) + TTL of ConfigMaps cache (1 minute by default) in kubelet. You can trigger an immediate refresh by updating one of the pod's annotations.

Understanding ConfigMaps and Pods

The ConfigMap API resource stores configuration data as key-value pairs. The data can be consumed in pods or provide the configurations for system components such as controllers. ConfigMap is similar to Secrets, but provides a means of working with strings that don't contain sensitive information. Users and system components alike can store configuration data in ConfigMap.

The ConfigMap's data field contains the configuration data. As shown in the example below, this can be simple -- like individual properties defined using --from-literal -- or complex -- like configuration files or JSON blobs defined using --from-file.

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2016-02-18T19:14:38Z
  name: example-config
  namespace: default
data:
  # example of a simple property defined using --from-literal
  example.property.1: hello
  example.property.2: world
  # example of a complex property defined using --from-file
  example.property.file: |-
    property.1=value-1
    property.2=value-2
    property.3=value-3    

Restrictions

  • You must create a ConfigMap before referencing it in a Pod specification (unless you mark the ConfigMap as "optional"). If you reference a ConfigMap that doesn't exist, the Pod won't start. Likewise, references to keys that don't exist in the ConfigMap will prevent the pod from starting.

  • If you use envFrom to define environment variables from ConfigMaps, keys that are considered invalid will be skipped. The pod will be allowed to start, but the invalid names will be recorded in the event log (InvalidVariableNames). The log message lists each skipped key. For example:

    kubectl get events
    

    The output is similar to this:

    LASTSEEN FIRSTSEEN COUNT NAME          KIND  SUBOBJECT  TYPE      REASON                            SOURCE                MESSAGE
    0s       0s        1     dapi-test-pod Pod              Warning   InvalidEnvironmentVariableNames   {kubelet, 127.0.0.1}  Keys [1badkey, 2alsobad] from the EnvFrom configMap default/myconfig were skipped since they are considered invalid environment variable names.
    
  • ConfigMaps reside in a specific Namespace. A ConfigMap can only be referenced by pods residing in the same namespace.

  • You can't use ConfigMaps for static pods, because the Kubelet does not support this.

What's next

© 2022 The Kubernetes Authors
Documentation Distributed under CC BY 4.0.
https://kubernetes.io/docs/tasks/configure-pod-container/configure-pod-configmap/