Configuring Redis using a ConfigMap

This page provides a real world example of how to configure Redis using a ConfigMap and builds upon the Configure Containers Using a ConfigMap task.

Objectives

• Create a ConfigMap with Redis configuration values
• Create a Redis Pod that mounts and uses the created ConfigMap
• Verify that the configuration was correctly applied.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

• Katacoda
• Play with Kubernetes

• The example shown on this page works with kubectl 1.14 and above.
• Understand Configure Containers Using a ConfigMap.

Real World Example: Configuring Redis using a ConfigMap

Follow the steps below to configure a Redis cache using data stored in a ConfigMap.

First create a ConfigMap with an empty configuration block:

cat <<EOF >./example-redis-config.yaml
apiVersion: v1
kind: ConfigMap
metadata:
  name: example-redis-config
data:
  redis-config: ""
EOF

Apply the ConfigMap created above, along with a Redis pod manifest:

kubectl apply -f example-redis-config.yaml
kubectl apply -f https://raw.githubusercontent.com/kubernetes/website/main/content/en/examples/pods/config/redis-pod.yaml

Examine the contents of the Redis pod manifest and note the following:

• A volume named config is created by spec.volumes[1]
• The key and path under spec.volumes[1].items[0] exposes the redis-config key from the example-redis-config ConfigMap as a file named redis.conf on the config volume.
• The config volume is then mounted at /redis-master by spec.containers[0].volumeMounts[1].

This has the net effect of exposing the data in data.redis-config from the example-redis-config ConfigMap above as /redis-master/redis.conf inside the Pod.

apiVersion: v1
kind: Pod
metadata:
  name: redis
spec:
  containers:
  - name: redis
    image: redis:5.0.4
    command:
      - redis-server
      - "/redis-master/redis.conf"
    env:
    - name: MASTER
      value: "true"
    ports:
    - containerPort: 6379
    resources:
      limits:
        cpu: "0.1"
    volumeMounts:
    - mountPath: /redis-master-data
      name: data
    - mountPath: /redis-master
      name: config
  volumes:
    - name: data
      emptyDir: {}
    - name: config
      configMap:
        name: example-redis-config
        items:
        - key: redis-config
          path: redis.conf

Examine the created objects:

kubectl get pod/redis configmap/example-redis-config 

You should see the following output:

NAME        READY   STATUS    RESTARTS   AGE
pod/redis   1/1     Running   0          8s

NAME                             DATA   AGE
configmap/example-redis-config   1      14s

Recall that we left redis-config key in the example-redis-config ConfigMap blank:

kubectl describe configmap/example-redis-config

You should see an empty redis-config key:

Name:         example-redis-config
Namespace:    default
Labels:       <none>
Annotations:  <none>

Data
====
redis-config:

Use kubectl exec to enter the pod and run the redis-cli tool to check the current configuration:

kubectl exec -it redis -- redis-cli

Check maxmemory:

127.0.0.1:6379> CONFIG GET maxmemory

It should show the default value of 0:

1) "maxmemory"
2) "0"

Similarly, check maxmemory-policy:

127.0.0.1:6379> CONFIG GET maxmemory-policy

Which should also yield its default value of noeviction:

1) "maxmemory-policy"
2) "noeviction"

Now let's add some configuration values to the example-redis-config ConfigMap:

apiVersion: v1
kind: ConfigMap
metadata:
  name: example-redis-config
data:
  redis-config: |
    maxmemory 2mb
    maxmemory-policy allkeys-lru    

Apply the updated ConfigMap:

kubectl apply -f example-redis-config.yaml

Confirm that the ConfigMap was updated:

kubectl describe configmap/example-redis-config

You should see the configuration values we just added:

Name:         example-redis-config
Namespace:    default
Labels:       <none>
Annotations:  <none>

Data
====
redis-config:
----
maxmemory 2mb
maxmemory-policy allkeys-lru

Check the Redis Pod again using redis-cli via kubectl exec to see if the configuration was applied:

kubectl exec -it redis -- redis-cli

Check maxmemory:

127.0.0.1:6379> CONFIG GET maxmemory

It remains at the default value of 0:

1) "maxmemory"
2) "0"

Similarly, maxmemory-policy remains at the noeviction default setting:

127.0.0.1:6379> CONFIG GET maxmemory-policy

Returns:

1) "maxmemory-policy"
2) "noeviction"

The configuration values have not changed because the Pod needs to be restarted to grab updated values from associated ConfigMaps. Let's delete and recreate the Pod:

kubectl delete pod redis
kubectl apply -f https://raw.githubusercontent.com/kubernetes/website/main/content/en/examples/pods/config/redis-pod.yaml

Now re-check the configuration values one last time:

kubectl exec -it redis -- redis-cli

Check maxmemory:

127.0.0.1:6379> CONFIG GET maxmemory

It should now return the updated value of 2097152:

1) "maxmemory"
2) "2097152"

Similarly, maxmemory-policy has also been updated:

127.0.0.1:6379> CONFIG GET maxmemory-policy

It now reflects the desired value of allkeys-lru:

1) "maxmemory-policy"
2) "allkeys-lru"

Clean up your work by deleting the created resources:

kubectl delete pod/redis configmap/example-redis-config

What's next

• Learn more about ConfigMaps.