The most recent release of MariaDB 10.4 is:
MariaDB 10.4.8 DownloadNow
Alternate download from mariadb.org
The most recent release of MariaDB 10.3 is:
MariaDB 10.3.18 Stable (GA) DownloadNow
Alternate download from mariadb.org
The current versions of the Galera wsrep provider library are 26.4.2
for Galera 4 and 25.3.27
for Galera 3.
For convenience, packages containing these libraries are included in the MariaDB YUM and APT repositories.
Currently, MariaDB Galera Cluster only supports the InnoDB storage engine.
A great resource for Galera users is the mailing list run by the developers at Codership. It can be found at Codership on Google Groups. If you use Galera, then it is recommended you subscribe.
MariaDB Galera Cluster is powered by:
In MariaDB 10.1 and later, the MySQL-wsrep patch has been merged into MariaDB Server. This means that the functionality of MariaDB Galera Cluster can be obtained by installing the standard MariaDB Server packages and the Galera wsrep provider library package. The following Galera version corresponds to each MariaDB Server version:
See Deciphering Galera Version Numbers for more information about how to interpret these version numbers.
See What is MariaDB Galera Cluster?: Galera Versions for more information about which specific Galera version is included in each release of MariaDB Server.
In supported builds, Galera Cluster functionality can be enabled by setting some configuration options that are mentioned below. Galera Cluster functionality is not enabled in a standard MariaDB Server installation unless explicitly enabled with these configuration options.
During normal operation a MariaDB Galera node does not consume much more memory than a regular MariaDB server. Additional memory is consumed for the certification index and uncommitted writesets, but normally this should not be noticeable in a typical application. There is one exception though:
To control memory usage for writeset caching, check the Galera parameters: gcs.recv_q_hard_limit
, gcs.recv_q_soft_limit
, and gcs.max_throttle
.
Before using MariaDB Galera Cluster, we would recommend reading through the known limitations, so you can be sure that it is appropriate for your application.
To use MariaDB Galera Cluster, there are two primary packages that you need to install:
As mentioned in the previous section, in MariaDB 10.1 and above, Galera Cluster support is actually included in the standard MariaDB Server packages. That means that installing MariaDB Galera Cluster package is the same as installing standard MariaDB Server package in those versions. However, you will also have to install an additional package to obtain the Galera wsrep provider library.
Some SST methods may also require additional packages to be installed. The mariabackup
SST method is generally the best option for large clusters that expect a lot of load.
MariaDB Galera Cluster can be installed via a package manager on Linux. In order to do so, your system needs to be configured to install from one of the MariaDB repositories.
You can configure your package manager to install it from MariaDB Corporation's MariaDB Package Repository by using the MariaDB Package Repository setup script.
You can also configure your package manager to install it from MariaDB Foundation's MariaDB Repository by using the MariaDB Repository Configuration Tool.
On RHEL, CentOS, Fedora, and other similar Linux distributions, it is highly recommended to install the relevant RPM packages from MariaDB's repository using yum
or dnf
. Starting with RHEL 8 and Fedora 22, yum
has been replaced by dnf
, which is the next major version of yum
. However, yum
commands still work on many systems that use dnf
.
To install MariaDB Galera Cluster with yum
or dnf
, follow the instructions at Installing MariaDB Galera Cluster with yum.
On Debian, Ubuntu, and other similar Linux distributions, it is highly recommended to install the relevant DEB packages from MariaDB's repository using apt-get
.
To install MariaDB Galera Cluster with apt-get
, follow the instructions at Installing MariaDB Galera Cluster with apt-get.
On SLES, OpenSUSE, and other similar Linux distributions, it is highly recommended to install the relevant RPM packages from MariaDB's repository using zypper
.
To install MariaDB Galera Cluster with zypper
, follow the instructions at Installing MariaDB Galera Cluster with ZYpp.
To install MariaDB Galera Cluster with a binary tarball, follow the instructions at Installing MariaDB Binary Tarballs.
To make the location of the libgalera_smm.so
library in binary tarballs more similar to its location in other packages, the library is now found at lib/galera/libgalera_smm.so
in the binary tarballs, and there is a symbolic link in the lib
directory that points to it.
To install MariaDB Galera Cluster by compiling it from source, you will have to compile both MariaDB Server and the Galera wsrep provider library. For some information on how to do this, see the pages at Installing Galera From Source. The pages at Compiling MariaDB From Source and Galera Cluster Documentation: Building Galera Cluster for MySQL may also be helpful. When compiling MariaDB 10.1 or earlier and you want to enable Galera Cluster support, be sure to set set -DWITH_WSREP=ON
and -DWITH_INNODB_DISALLOW_WRITES=ON
when running cmake. When compiling MariaDB 10.2 or later, it is enabled by default.
A number of options need to be set in order for Galera Cluster to work when using MariaDB. See Configuring MariaDB Galera Cluster for more information.
To first node of a new cluster needs to be bootstrapped by starting mysqld
on that node with the option --wsrep-new-cluster
option. This option tells the node that there is no existing cluster to connect to. The node will create a new UUID to identify the new cluster.
Do not use the --wsrep-new-cluster
option when connecting to an existing cluster. Restarting the node with this option set will cause the node to create new UUID to identify the cluster again, and the node won't reconnect to the old cluster. See the next section about how to reconnect to an existing cluster.
For example, if you were manually starting mysqld
on a node, then you could bootstrap it by executing the following:
$ mysqld --wsrep-new-cluster
However, keep in mind that most users are not going to be starting mysqld
manually. Instead, most users will use a service manager to start mysqld
. See the following sections on how to bootstrap a node with the most common service managers.
On operating systems that use systemd, a node can be bootstrapped in the following way:
$ galera_new_cluster
This wrapper uses systemd to run mysqld
with the --wsrep-new-cluster
option.
If you are using the systemd service that supports the systemd service's method for interacting with multiple MariaDB Server processes, then you can bootstrap a specific instance by specifying the instance name as a suffix. For example:
$ galera_new_cluster mariadb@node1
Systemd support and the galera_new_cluster script were added in MariaDB 10.1.
On operating systems that use sysVinit, a node can be bootstrapped in the following way:
$ service mysql bootstrap
This runs mysqld
with the --wsrep-new-cluster
option.
Once you have a cluster running and you want to add/reconnect another node to it, you must supply an address of one or more of the existing cluster members in the wsrep_cluster_address
option. For example, if the first node of the cluster has the address 192.168.0.1, then you could add a second node to the cluster by setting the following option in a server option group in an option file:
[mariadb] ... wsrep_cluster_address=gcomm://192.168.0.1 # DNS names work as well, IP is preferred for performance
The new node only needs to connect to one of the existing cluster nodes. Once it connects to one of the existing cluster nodes, it will be able to see all of the nodes in the cluster. However, it is generally better to list all nodes of the cluster in wsrep_cluster_address
, so that any node can join a cluster by connecting to any of the other cluster nodes, even if one or more of the cluster nodes are down. It is even OK to list a node's own IP address in wsrep_cluster_address
, since Galera Cluster is smart enough to ignore it.
Once all members agree on the membership, the cluster's state will be exchanged. If the new node's state is different from that of the cluster, then it will request an IST or SST to make itself consistent with the other nodes.
If you shut down all nodes at the same time, then you have effectively terminated the cluster. Of course, the cluster's data still exists, but the running cluster no longer exists. When this happens, you'll need to bootstrap the cluster again.
If the cluster is not bootstrapped and mysqld
on the first node is just started normally, then the node willl try to connect to at least one of the nodes listed in the wsrep_cluster_address
option. If no nodes are currently running, then this will fail. Bootstrapping the first node solves this problem.
In some cases Galera will refuse to bootstrap a node if it detects that it might not be the most advanced node in the cluster. Galera makes this determination if the node was not the last one in the cluster to be shut down or if the node crashed. In those cases, manual intervention is needed.
If you know for sure which node is the most advanced you can edit the grastate.dat
file in the datadir
. You can set safe_to_bootstrap=1
on the most advanced node.
You can determine which node is the most advanced by checking grastate.dat
on each node and looking for the node with the highest seqno
. If the node crashed and seqno=-1
, then you can find the most advanced node by recovering the seqno
on each node with the wsrep_recover
option. For example:
$ mysqld --wsrep_recover
On operating systems that use systemd
, the position of a node can be recovered by running the galera_recovery
script. For example:
$ galera_recovery
If you are using the systemd
service that supports the systemd service's method for interacting with multiple MariaDB Server processes, then you can recover the position of a specific instance by specifying the instance name as a suffix. For example:
$ galera_recovery mariadb@node1
The galera_recovery
script recovers the position of a node by running mysqld
with the wsrep_recover
option.
When the galera_recovery
script runs mysqld
, it does not write to the error log. Instead, it redirects mysqld
log output to a file named with the format /tmp/wsrep_recovery.XXXXXX
, where XXXXXX
is replaced with random characters.
When Galera is enabled, MariaDB's systemd
service automatically runs the galera_recovery
script prior to starting MariaDB, so that MariaDB starts with the proper Galera position.
Support for systemd
and the galera_recovery
script were added in MariaDB 10.1.
In a State Snapshot Transfer (SST), the cluster provisions nodes by transferring a full data copy from one node to another. When a new node joins the cluster, the new node initiates a State Snapshot Transfer to synchronize its data with a node that is already part of the cluster.
See Introduction to State Snapshot Transfers (SSTs) for more information.
In an Incremental State Transfer (SST), the cluster provisions nodes by transferring a node's missing writesets from one node to another. When a new node joins the cluster, the new node initiates a Incremental State Transfer to synchronize its data with a node that is already part of the cluster.
If a node has only been out of a cluster for a little while, then an IST is generally faster than an SST.
In MariaDB 10.1 and above, MariaDB Galera Cluster supports Data at Rest Encryption. See SSTs and Data at Rest Encryption for some disclaimers on how SSTs are affected when encryption is configured.
Some data still cannot be encrypted:
Galera Cluster's status variables can be queried with the standard SHOW STATUS
command. For example:
SHOW GLOBAL STATUS LIKE 'wsrep_%';
The cluster nodes can be configured to invoke a command when cluster membership or node status changes. This mechanism can also be used to communicate the event to some external monitoring agent. This is configured by setting wsrep_notify_cmd
. See Galera Cluster documentation: Notification Command for more information.
© 2019 MariaDB
Licensed under the Creative Commons Attribution 3.0 Unported License and the GNU Free Documentation License.
https://mariadb.com/kb/en/getting-started-with-mariadb-galera-cluster/