W3cubDocs

/MariaDB

Parallel Replication

MariaDB starting with 10.0.5

Parallel Replication was introduced in MariaDB 10.0.5.

From MariaDB 10.0.5, some writes, replicated from the master can be executed in parallel (simultaneously) on the slave. Note that for parallel replication to work, both the master and slave need to be MariaDB 10.0.5 or later.

Parallel Replication Overview

MariaDB replication in general takes place in three parts:

  • Replication events are read from the master by the IO thread and queued in the relay log.
  • Replication events are fetched one at a time by the SQL thread from the relay log
  • Each event is applied on the slave to replicate all changes done on the master.

Before MariaDB 10, the third step was also performed by the SQL thread; this meant that only one event could execute at a time, and replication was essentially single-threaded. Since MariaDB 10, the third step can optionally be performed by a pool of separate replication worker threads, and thereby potentially increase replication performance by applying multiple events in parallel.

How to Enable Parallel Slave

To enable, specify slave-parallel-threads=# in your my.cnf file as an argument to mysql. Parallel replication can in addition be disabled on a per-multi-source connection by setting @@connection_name.slave-parallel-mode to "none".

The value (#) of slave_parallel_threads specifies how many threads will be created in a pool of worker threads used to apply events in parallel for *all* your slaves (this includes multi-source replication). If the value is zero, then no worker threads are created, and old-style replication is used where events are applied inside the SQL thread. Usually the value, if non-zero, should be at least two times the number of multi-source master connections used. It makes little sense to use only a single worker thread for one connection; this will incur some overhead in inter-thread communication between the SQL thread and the worker thread, but with just a single worker thread events can not be applied in parallel anyway.

slave-parallel-threads=# is a dynamic variable that can be changed without restarting mysqld. All slaves connections must however be stopped when changing the value.

Configuring the Slave Parallel Mode

Parallel replication can be in-order or out-of-order:

  • In-order executes transactions in parallel, but orders the commit step of the transactions to happen in the exact same order as on the master. Transactions are only executed in parallel to the extent that this can be automatically verified to be possible without any conflicts. This means that the use of parallelism is completely transparent to the application.
  • Out-of-order can execute and commit transactions in different order on the slave than originally on the master. This means that the application must be tolerant to seeing updates occur in different order. The application is also responsible for ensuring that there are no conflicts between transactions that are replicated out-of-order. Out-of-order is only used in GTID mode and only when explicitly enabled by the application, using the replication domain that is part of the GTID.

In-Order Parallel Replication

Optimistic Mode of In-Order Parallel Replication

MariaDB starting with 10.1.3

Optimistic mode of in-order parallel replication was introduced in MariaDB 10.1.3.

Optimistic mode of in-order parallel replication provides a lot of opportunities for parallel apply on the slave while still preserving exact transaction semantics from the point of view of applications.

Optimistic mode of in-order parallel replication can be configured by setting the slave_parallel_mode system variable to optimistic on the slave.

Any transactional DML (INSERT/UPDATE/DELETE) is allowed to run in parallel, up to the limit of @@slave_domain_parallel_threads. This may cause conflicts on the slave, eg. if two transactions try to modify the same row. Any such conflict is detected, and the latter of the two transactions is rolled back, allowing the former to proceed. The latter transaction is then re-tried once the former has completed.

The term "optimistic" is used for this mode, because the server optimistically assumes that few conflicts will occur, and that the extra work spent rolling back and retrying conflicting transactions is justified from the gain from running most transactions in parallel.

There are a few heuristics to try to avoid needless conflicts. If a transaction executed a row lock wait on the master, it will not be run in parallel on the slave. Transactions can also be marked explicitly as potentially conflicting on the master, by setting the variable @@skip_parallel_replication. More such heuristics may be added in later MariaDB versions. There is a further --slave-parallel-mode called "aggressive", where these heuristics are disabled, allowing even more transactions to be applied in parallel.

Non-transactional DML and DDL is not safe to optimistically apply in parallel, as it cannot be rolled back in case of conflicts. Thus, in optimistic mode, non-transactional (such as MyISAM) updates are not applied in parallel with earlier events (it is however possible to apply a MyISAM update in parallel with a later InnoDB update). DDL statements are not applied in parallel with any other transactions, earlier or later.

The different kind of transactions can be identified in the output of mysqlbinlog. For example:

#150324 13:06:26 server id 1  end_log_pos 6881 	GTID 0-1-42 ddl
...
#150324 13:06:26 server id 1  end_log_pos 7816 	GTID 0-1-47
...
#150324 13:06:26 server id 1  end_log_pos 8177  GTID 0-1-49 trans
/*!100101 SET @@session.skip_parallel_replication=1*//*!*/;
...
#150324 13:06:26 server id 1  end_log_pos 9836 	GTID 0-1-59 trans waited

GTID 0-1-42 is marked as being DDL. GTID 0-1-47 is marked as being non-transactional DML, while GTID 0-1-49 is transactional DML (seen on the "trans" keyword). GTID 0-1-49 was additionally run with @@skip_parallel_replication set on the master. GTID 0-1-59 is transactional DML that had a row lock wait when run on the master (the "waited" keyword).

Aggressive Mode of In-Order Parallel Replication

MariaDB starting with 10.1.3

Aggressive mode of in-order parallel replication was introduced in MariaDB 10.1.3.

Aggressive mode of in-order parallel replication is very similar to optimistic mode. The main difference is that the slave does not consider whether transactions conflicted on the master when deciding whether to apply the transactions in parallel.

Aggressive mode of in-order parallel replication can be configured by setting the slave_parallel_mode system variable to aggressive on the slave.

Conservative Mode of In-Order Parallel Replication

MariaDB starting with 10.0

Conservative mode of in-order parallel replication was introduced in MariaDB 10.0.

Conservative mode of in-order parallel replication uses the group commit on the master to discover potential for parallel apply of events on the slave. If two transactions commit together in a group commit on the master, they are written into the binlog with the same commit id. Such events are certain to not conflict with each other, and they can be scheduled by the parallel replication to run in different worker threads.

Conservative mode of in-order parallel replication is currently the default mode, but it can also be configured by setting the slave_parallel_mode system variable to conservative on the slave.

Two transactions that were committed separately on the master can potentially conflict (eg. modify the same row of a table). Thus, the worker that applies the second transaction will not start immediately, but wait until the first transaction begins the commit step; at this point it is safe to start the second transaction, as it can no longer disrupt the execution of the first one.

Here is example output from mysqlbinlog that shows how GTID events are marked with commit id. The GTID 0-1-47 has no commit id, and can not run in parallel. The GTIDs 0-1-48 and 0-1-49 have the same commit id 630, and can thus replicate in parallel with one another on a slave:

#150324 12:54:24 server id 1  end_log_pos 20052 	GTID 0-1-47 trans
...
#150324 12:54:24 server id 1  end_log_pos 20212 	GTID 0-1-48 cid=630 trans
...
#150324 12:54:24 server id 1  end_log_pos 20372 	GTID 0-1-49 cid=630 trans

In either case, when the two transactions reach the point where the low-level commit happens and commit order is determined, the two commits are sequenced to happen in the same order as on the master, so that operation is transparent to applications.

The opportunities for parallel replication on slaves can be highly increased if more transactions are committed in a group commit on the master. This can be tuned using the binlog_commit_wait_count and binlog_commit_wait_usec variables. If for example the application can tolerate up to 50 milliseconds extra delay for transactions on the master, one can set binlog_commit_wait_usec=50000 and binlog_commit_wait_count=20 to get up to 20 transactions at a time available for replication in parallel. Care must however be taken to not set binlog_commit_wait_usec too high, as this could cause significant slowdown for applications that run a lot of small transactions serially one after the other.

Note that even if there is no parallelism available from the master group commit, there is still an opportunity for speedup from in-order parallel replication, since the actual commit steps of different transactions can run in parallel. This can be particularly effective on a slave with binlog enabled (log_slave_updates=1), and more so if slave is configured to be crash-safe (sync_binlog=1 and innodb_flush_log_at_trx_commit=1), as this makes group commit possible on the slave.

Minimal Mode of In-Order Parallel Replication

MariaDB starting with 10.1.3

Minimal mode of in-order parallel replication was introduced in MariaDB 10.1.3.

Minimal mode of in-order parallel replication onlyallows the commit step of transactions to be applied in parallel; all other steps are applied serially.

Minimal mode of in-order parallel replication can be configured by setting the slave_parallel_mode system variable to minimal on the slave.

Out-of-Order Parallel Replication

Out-of-order parallel replication happens (only) when using GTID mode, when GTIDs with different replication domains are used. The replication domain is set by the DBA/application using the variable gtid_domain_id.

Two transactions having GTIDs with different domain_id are scheduled to different worker threads by parallel replication, and are allowed to execute completely independently from each other. It is the responsibility of the application to only set different domain_ids for transactions that are truly independent, and are guaranteed to not conflict with each other. The application must also be able to work correctly even though the transactions with different domain_id are seen as committing in different order between the slave and the master, and between different slaves.

Out-of-order parallel replication can potentially give more performance gain than in-order parallel replication, since the application can explicitly give more opportunities for running transactions in parallel than what the server can determine on its own automatically.

One simple but effective usage is to run long-running statements, such as ALTER TABLE, in a separate replication domain. This allows replication of other transactions to proceed uninterrupted:

SET SESSION gtid_domain_id=1
ALTER TABLE t ADD INDEX myidx(b)
SET SESSION gtid_domain_id=0

Normally, a long-running ALTER TABLE or other query will stall all following transactions, causing the slave to become behind the master as least as long time as it takes to run the long-running query. By using out-of-order parallel replication by setting the replication domain id, this can be avoided. The DBA/application must ensure that no conflicting transactions will be replicated while the ALTER TABLE runs.

Another common opportunity for out-of-order parallel replication comes in connection with multi-source replication. Suppose we have two different masters M1 and M2, and we are using multi-source replication to have S1 as a slave of both M1 and M2. S1 will apply events received from M1 in parallel with events received from M2. If we now have a third-level slave S2 that replicates from S1 as master, we want S2 to also be able to apply events that originated on M1 in parallel with events that originated on M2. This can be achieved with out-of-order parallel replication, by setting gtid_domain_id different on M1 and M2.

Note that there are no special restrictions on what operations can be replicated in parallel using out-of-order; such operations can be on the same database/schema or even on the same table. The only restriction is that the operations must not conflict, that is they must be able to be applied in any order and still end up with the same result.

When using out-of-order parallel replication, the current slave position in the master's binlog becomes multi-dimensional - each replication domain can have reached a different point in the master binlog at any one time. The current position can be seen from the variable gtid_slave_pos. When the slave is stopped, restarted, or switched to replicate from a different master using CHANGE MASTER, MariaDB automatically handles restarting each replication domain at the appropriate point in the binlog.

Out-of-order parallel replication is disabled when --slave-parallel-mode=minimal (or none).

Checking Worker Thread Status in SHOW PROCESSLIST

The worker threads will be listed as "system user" in SHOW PROCESSLIST. Their state will show the query they are currently working on, or it can show one of these:

  • "Waiting for work from main SQL threads". This means that the worker thread is idle, no work is available for it at the moment.
  • "Waiting for prior transaction to start commit before starting next transaction". This means that the previous batch of transactions that committed together on the master master has to complete first. This worker thread is waiting for that to happen before it can start working on the following batch.
  • "Waiting for prior transaction to commit". This means that the transaction has been executed by the worker thread. In order to ensure in-order commit, the worker thread is waiting to commit until the previous transaction is ready to commit before it.

Expected Performance Gain

Here is an article showing up to ten times improvement when using parallel replication: http://kristiannielsen.livejournal.com/18435.html.

Configuring the Maximum Size of the Parallel Slave Queue

The slave_parallel_max_queued system variable can be used to configure the maximum size of the parallel slave queue. This system variable is only meaningful when parallel replication is configured (i.e. when slave_parallel_threads > 0).

When parallel replication is used, the SQL thread will read ahead in the relay logs, queueing events in memory while looking for opportunities for executing events in parallel. The slave_parallel_max_queued system variable sets a limit for how much memory it will use for this.

The configured value of the slave_parallel_max_queued system variable is actually allocated for each worker thread, so the total allocation is actually equivalent to the following:

slave_parallel_max_queued * slave_parallel_threads

If this value is set too high, and the slave is far (eg. gigabytes of binlog) behind the master, then the SQL thread can quickly read all of that and fill up memory with huge amounts of binlog events faster than the worker threads can consume them.

On the other hand, if set too low, the SQL thread might not have sufficient space for queuing enough events to keep the worker threads busy, which could reduce performance. In this case, the SQL thread will have the thread state that states Waiting for room in worker thread event queue. For example:

+----+-------------+-----------+------+---------+--------+-----------------------------------------------+------------------+----------+
| Id | User        | Host      | db   | Command | Time   | State                                         | Info             | Progress |
+----+-------------+-----------+------+---------+--------+-----------------------------------------------+------------------+----------+
|  3 | system user |           | NULL | Connect |    139 | closing tables                                | NULL             |    0.000 |
|  4 | system user |           | NULL | Connect |    139 | Waiting for work from SQL thread              | NULL             |    0.000 |
|  6 | system user |           | NULL | Connect | 264274 | Waiting for master to send event              | NULL             |    0.000 |
| 10 | root        | localhost | NULL | Sleep   |     43 |                                               | NULL             |    0.000 |
| 21 | system user |           | NULL | Connect |     45 | Waiting for room in worker thread event queue | NULL             |    0.000 |
| 54 | root        | localhost | NULL | Query   |      0 | init                                          | SHOW PROCESSLIST |    0.000 |
+----+-------------+-----------+------+---------+--------+-----------------------------------------------+------------------+----------+

The slave_parallel_max_queued system variable does not define a hard limit, since the binary log events that are currently executing always need to be held in-memory. This means that at least two events per worker thread can always be queued in-memory, regardless of the value of slave_parallel_threads.

Usually, the slave_parallel_threads system variable should be set large enough that the SQL thread is able to read far enough ahead in the binary log to exploit all possible parallelism. In normal operation, the slave will hopefully not be too far behind, so there will not be a need to queue much data in-memory. The slave_parallel_max_queued system variable could be set fairly high (eg. a few hundred kilobytes) to not limit throughtput. It should just be set low enough that total allocation of the parallel slave queue will not cause the server to run out of memory.

Configuration Variable slave_domain_parallel_threads

The pool of replication worker threads is shared among all multi-source master connections, and among all replication domains that can replicate in parallel using out-of-order.

If one master connection or replication domain is currently processing a long-running query, it is possible that it will allocate all the worker threads in the pool, only to have them wait for the long-running query to complete, stalling any other master connection or replication domain, which will have to wait for a worker thread to become free.

This can be avoided by setting slave_domain_parallel_threads to a number that is lower than slave_parallel_threads. When set different from zero, each replication domain in one master connection can reserve at most that many worker threads at any one time, leaving the rest (up to the value of slave_parallel_threads) free for other master connections or replication domains to use in parallel.

The slave_domain_parallel_threads variable is dynamic and can be changed without restarting the server; all slaves must be stopped while changing it, though.

Implementation Details

The implementation is described in MDEV-4506.

See Also

Content reproduced on this site is the property of its respective owners, and this content is not reviewed in advance by MariaDB. The views, information and opinions expressed by this content do not necessarily represent those of MariaDB or any other party.

© 2019 MariaDB
Licensed under the Creative Commons Attribution 3.0 Unported License and the GNU Free Documentation License.
https://mariadb.com/kb/en/parallel-replication/