Class SecurityPermission

All Implemented Interfaces:
Serializable, Guard 
public final class SecurityPermission
extends BasicPermission

This class is for security permissions. A SecurityPermission contains a name (also referred to as a "target name") but no actions list; you either have the named permission or you don't.

The target name is the name of a security configuration parameter (see below). Currently the SecurityPermission object is used to guard access to the AccessControlContext, Policy, Provider, Security, Signer, and Identity objects.

The following table lists the standard SecurityPermission target names, and for each provides a description of what the permission allows and a discussion of the risks of granting code the permission.

target name, what the permission allows, and associated risks
Permission Target Name What the Permission Allows Risks of Allowing this Permission
authProvider.{provider name} Allow the named provider to be an AuthProvider for login and logout operations. This allows the named provider to perform login and logout operations. The named provider must extend AuthProvider and care must be taken to grant to a trusted provider since login operations involve sensitive authentication information such as PINs and passwords.
createAccessControlContext Creation of an AccessControlContext This allows someone to instantiate an AccessControlContext with a DomainCombiner. Extreme care must be taken when granting this permission. Malicious code could create a DomainCombiner that augments the set of permissions granted to code, and even grant the code AllPermission.
getDomainCombiner Retrieval of an AccessControlContext's DomainCombiner This allows someone to retrieve an AccessControlContext's DomainCombiner. Since DomainCombiners may contain sensitive information, this could potentially lead to a privacy leak.
getPolicy Retrieval of the system-wide security policy (specifically, of the currently-installed Policy object) This allows someone to query the policy via the getPermissions call, which discloses which permissions would be granted to a given CodeSource. While revealing the policy does not compromise the security of the system, it does provide malicious code with additional information which it may use to better aim an attack. It is wise not to divulge more information than necessary.
setPolicy Setting of the system-wide security policy (specifically, the Policy object) Granting this permission is extremely dangerous, as malicious code may grant itself all the necessary permissions it needs to successfully mount an attack on the system.
createPolicy.{policy type} Getting an instance of a Policy implementation from a provider Granting this permission enables code to obtain a Policy object. Malicious code may query the Policy object to determine what permissions have been granted to code other than itself.
getProperty.{key} Retrieval of the security property with the specified key Depending on the particular key for which access has been granted, the code may have access to the list of security providers, as well as the location of the system-wide and user security policies. while revealing this information does not compromise the security of the system, it does provide malicious code with additional information which it may use to better aim an attack.
setProperty.{key} Setting of the security property with the specified key This could include setting a security provider or defining the location of the system-wide security policy. Malicious code that has permission to set a new security provider may set a rogue provider that steals confidential information such as cryptographic private keys. In addition, malicious code with permission to set the location of the system-wide security policy may point it to a security policy that grants the attacker all the necessary permissions it requires to successfully mount an attack on the system.
insertProvider Addition of a new provider This would allow somebody to introduce a possibly malicious provider (e.g., one that discloses the private keys passed to it) as the highest-priority provider. This would be possible because the Security object (which manages the installed providers) currently does not check the integrity or authenticity of a provider before attaching it. The "insertProvider" permission subsumes the "insertProvider.{provider name}" permission (see the section below for more information).
removeProvider.{provider name} Removal of the specified provider This may change the behavior or disable execution of other parts of the program. If a provider subsequently requested by the program has been removed, execution may fail. Also, if the removed provider is not explicitly requested by the rest of the program, but it would normally be the provider chosen when a cryptography service is requested (due to its previous order in the list of providers), a different provider will be chosen instead, or no suitable provider will be found, thereby resulting in program failure.
clearProviderProperties.{provider name} "Clearing" of a Provider so that it no longer contains the properties used to look up services implemented by the provider This disables the lookup of services implemented by the provider. This may thus change the behavior or disable execution of other parts of the program that would normally utilize the Provider, as described under the "removeProvider.{provider name}" permission.
putProviderProperty.{provider name} Setting of properties for the specified Provider The provider properties each specify the name and location of a particular service implemented by the provider. By granting this permission, you let code replace the service specification with another one, thereby specifying a different implementation.
removeProviderProperty.{provider name} Removal of properties from the specified Provider This disables the lookup of services implemented by the provider. They are no longer accessible due to removal of the properties specifying their names and locations. This may change the behavior or disable execution of other parts of the program that would normally utilize the Provider, as described under the "removeProvider.{provider name}" permission.

The following permissions have been superseded by newer permissions or are associated with classes that have been deprecated: Identity, IdentityScope, Signer. Use of them is discouraged. See the applicable classes for more information.

target name, what the permission allows, and associated risks
Permission Target Name What the Permission Allows Risks of Allowing this Permission
insertProvider.{provider name} Addition of a new provider, with the specified name Use of this permission is discouraged from further use because it is possible to circumvent the name restrictions by overriding the Provider.getName() method. Also, there is an equivalent level of risk associated with granting code permission to insert a provider with a specific name, or any name it chooses. Users should use the "insertProvider" permission instead.

This would allow somebody to introduce a possibly malicious provider (e.g., one that discloses the private keys passed to it) as the highest-priority provider. This would be possible because the Security object (which manages the installed providers) currently does not check the integrity or authenticity of a provider before attaching it.
setSystemScope Setting of the system identity scope This would allow an attacker to configure the system identity scope with certificates that should not be trusted, thereby granting applet or application code signed with those certificates privileges that would have been denied by the system's original identity scope.
setIdentityPublicKey Setting of the public key for an Identity If the identity is marked as "trusted", this allows an attacker to introduce a different public key (e.g., its own) that is not trusted by the system's identity scope, thereby granting applet or application code signed with that public key privileges that would have been denied otherwise.
setIdentityInfo Setting of a general information string for an Identity This allows attackers to set the general description for an identity. This may trick applications into using a different identity than intended or may prevent applications from finding a particular identity.
addIdentityCertificate Addition of a certificate for an Identity This allows attackers to set a certificate for an identity's public key. This is dangerous because it affects the trust relationship across the system. This public key suddenly becomes trusted to a wider audience than it otherwise would be.
removeIdentityCertificate Removal of a certificate for an Identity This allows attackers to remove a certificate for an identity's public key. This is dangerous because it affects the trust relationship across the system. This public key suddenly becomes considered less trustworthy than it otherwise would be.
printIdentity Viewing the name of a principal and optionally the scope in which it is used, and whether or not it is considered "trusted" in that scope The scope that is printed out may be a filename, in which case it may convey local system information. For example, here's a sample printout of an identity named "carol", who is marked not trusted in the user's identity database:
carol[/home/luehe/identitydb.obj][not trusted]
getSignerPrivateKey Retrieval of a Signer's private key It is very dangerous to allow access to a private key; private keys are supposed to be kept secret. Otherwise, code can use the private key to sign various files and claim the signature came from the Signer.
setSignerKeyPair Setting of the key pair (public key and private key) for a Signer This would allow an attacker to replace somebody else's (the "target's") keypair with a possibly weaker keypair (e.g., a keypair of a smaller keysize). This also would allow the attacker to listen in on encrypted communication between the target and its peers. The target's peers might wrap an encryption session key under the target's "new" public key, which would allow the attacker (who possesses the corresponding private key) to unwrap the session key and decipher the communication data encrypted under that session key.
Implementation Note:
Implementations may define additional target names, but should use naming conventions such as reverse domain name notation to avoid name clashes.
Since:
1.2
See Also:
BasicPermission, Permission, Permissions, PermissionCollection, SecurityManager, Serialized Form

Constructor Summary

Constructors
Constructor Description
SecurityPermission​(String name)

Creates a new SecurityPermission with the specified name.
SecurityPermission​(String name, String actions)

Creates a new SecurityPermission object with the specified name.

Method Summary

Methods declared in class java.security.BasicPermission

equals, getActions, hashCode, implies, newPermissionCollection

Methods declared in class java.security.Permission

checkGuard, getName, toString

Methods declared in class java.lang.Object

clone, finalize, getClass, notify, notifyAll, wait, wait, wait

Constructor Detail

SecurityPermission

public SecurityPermission​(String name)

Creates a new SecurityPermission with the specified name. The name is the symbolic name of the SecurityPermission. An asterisk may appear at the end of the name, following a ".", or by itself, to signify a wildcard match.

Parameters:
name - the name of the SecurityPermission
Throws:
NullPointerException - if name is null.
IllegalArgumentException - if name is empty.

SecurityPermission

public SecurityPermission​(String name,
                          String actions)

Creates a new SecurityPermission object with the specified name. The name is the symbolic name of the SecurityPermission, and the actions String is currently unused and should be null.

Parameters:
name - the name of the SecurityPermission
actions - should be null.
Throws:
NullPointerException - if name is null.
IllegalArgumentException - if name is empty.