public static ShortBuffer allocate(int capacity)

Allocates a new short buffer.

The new buffer's position will be zero, its limit will be its capacity, its mark will be undefined, each of its elements will be initialized to zero, and its byte order will be the native order of the underlying hardware. It will have a backing array, and its array offset will be zero.

public static ShortBuffer wrap(short[] array, int offset, int length)

Wraps a short array into a buffer.

The new buffer will be backed by the given short array; that is, modifications to the buffer will cause the array to be modified and vice versa. The new buffer's capacity will be array.length, its position will be offset, its limit will be offset + length, its mark will be undefined, and its byte order will be the native order of the underlying hardware. Its backing array will be the given array, and its array offset will be zero.

public static ShortBuffer wrap(short[] array)

Wraps a short array into a buffer.

The new buffer will be backed by the given short array; that is, modifications to the buffer will cause the array to be modified and vice versa. The new buffer's capacity and limit will be array.length, its position will be zero, its mark will be undefined, and its byte order will be the native order of the underlying hardware. Its backing array will be the given array, and its array offset will be zero.

public abstract ShortBuffer slice()

Creates a new short buffer whose content is a shared subsequence of this buffer's content.

The content of the new buffer will start at this buffer's current position. Changes to this buffer's content will be visible in the new buffer, and vice versa; the two buffers' position, limit, and mark values will be independent.

The new buffer's position will be zero, its capacity and its limit will be the number of shorts remaining in this buffer, its mark will be undefined, and its byte order will be identical to that of this buffer. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

public abstract ShortBuffer slice(int index, int length)

Creates a new short buffer whose content is a shared subsequence of this buffer's content.

The content of the new buffer will start at position index in this buffer, and will contain length elements. Changes to this buffer's content will be visible in the new buffer, and vice versa; the two buffers' position, limit, and mark values will be independent.

The new buffer's position will be zero, its capacity and its limit will be length, its mark will be undefined, and its byte order will be identical to that of this buffer. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

public abstract ShortBuffer duplicate()

Creates a new short buffer that shares this buffer's content.

The content of the new buffer will be that of this buffer. Changes to this buffer's content will be visible in the new buffer, and vice versa; the two buffers' position, limit, and mark values will be independent.

The new buffer's capacity, limit, position, mark values, and byte order will be identical to those of this buffer. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

public abstract ShortBuffer asReadOnlyBuffer()

Creates a new, read-only short buffer that shares this buffer's content.

The content of the new buffer will be that of this buffer. Changes to this buffer's content will be visible in the new buffer; the new buffer itself, however, will be read-only and will not allow the shared content to be modified. The two buffers' position, limit, and mark values will be independent.

The new buffer's capacity, limit, position, mark values, and byte order will be identical to those of this buffer.

If this buffer is itself read-only then this method behaves in exactly the same way as the duplicate method.

public abstract short get()

Relative get method. Reads the short at this buffer's current position, and then increments the position.

public abstract ShortBuffer put(short s)

Relative put method (optional operation).

Writes the given short into this buffer at the current position, and then increments the position.

public abstract short get(int index)

Absolute get method. Reads the short at the given index.

public abstract ShortBuffer put(int index, short s)

Absolute put method (optional operation).

Writes the given short into this buffer at the given index.

public ShortBuffer get(short[] dst, int offset, int length)

Relative bulk get method.

This method transfers shorts from this buffer into the given destination array. If there are fewer shorts remaining in the buffer than are required to satisfy the request, that is, if length > remaining(), then no shorts are transferred and a BufferUnderflowException is thrown.

Otherwise, this method copies length shorts from this buffer into the given array, starting at the current position of this buffer and at the given offset in the array. The position of this buffer is then incremented by length.

In other words, an invocation of this method of the form src.get(dst, off, len) has exactly the same effect as the loop

except that it first checks that there are sufficient shorts in this buffer and it is potentially much more efficient.

public ShortBuffer get(short[] dst)

Relative bulk get method.

This method transfers shorts from this buffer into the given destination array. An invocation of this method of the form src.get(a) behaves in exactly the same way as the invocation

public ShortBuffer get(int index, short[] dst, int offset, int length)

Absolute bulk get method.

This method transfers length shorts from this buffer into the given array, starting at the given index in this buffer and at the given offset in the array. The position of this buffer is unchanged.

An invocation of this method of the form src.get(index, dst, offset, length) has exactly the same effect as the following loop except that it first checks the consistency of the supplied parameters and it is potentially much more efficient:

public ShortBuffer get(int index, short[] dst)

Absolute bulk get method.

This method transfers shorts from this buffer into the given destination array. The position of this buffer is unchanged. An invocation of this method of the form src.get(index, dst) behaves in exactly the same way as the invocation:

public ShortBuffer put(ShortBuffer src)

Relative bulk put method (optional operation).

This method transfers the shorts remaining in the given source buffer into this buffer. If there are more shorts remaining in the source buffer than in this buffer, that is, if src.remaining() > remaining(), then no shorts are transferred and a BufferOverflowException is thrown.

Otherwise, this method copies n = src.remaining() shorts from the given buffer into this buffer, starting at each buffer's current position. The positions of both buffers are then incremented by n.

In other words, an invocation of this method of the form dst.put(src) has exactly the same effect as the loop

except that it first checks that there is sufficient space in this buffer and it is potentially much more efficient. If this buffer and the source buffer share the same backing array or memory, then the result will be as if the source elements were first copied to an intermediate location before being written into this buffer.

public ShortBuffer put(int index, ShortBuffer src, int offset, int length)

Absolute bulk put method (optional operation).

This method transfers length shorts into this buffer from the given source buffer, starting at the given offset in the source buffer and the given index in this buffer. The positions of both buffers are unchanged.

In other words, an invocation of this method of the form dst.put(index, src, offset, length) has exactly the same effect as the loop

except that it first checks the consistency of the supplied parameters and it is potentially much more efficient. If this buffer and the source buffer share the same backing array or memory, then the result will be as if the source elements were first copied to an intermediate location before being written into this buffer.

public ShortBuffer put(short[] src, int offset, int length)

Relative bulk put method (optional operation).

This method transfers shorts into this buffer from the given source array. If there are more shorts to be copied from the array than remain in this buffer, that is, if length > remaining(), then no shorts are transferred and a BufferOverflowException is thrown.

Otherwise, this method copies length shorts from the given array into this buffer, starting at the given offset in the array and at the current position of this buffer. The position of this buffer is then incremented by length.

In other words, an invocation of this method of the form dst.put(src, off, len) has exactly the same effect as the loop

except that it first checks that there is sufficient space in this buffer and it is potentially much more efficient.

public final ShortBuffer put(short[] src)

Relative bulk put method (optional operation).

This method transfers the entire content of the given source short array into this buffer. An invocation of this method of the form dst.put(a) behaves in exactly the same way as the invocation

public ShortBuffer put(int index, short[] src, int offset, int length)

Absolute bulk put method (optional operation).

This method transfers length shorts from the given array, starting at the given offset in the array and at the given index in this buffer. The position of this buffer is unchanged.

An invocation of this method of the form dst.put(index, src, offset, length) has exactly the same effect as the following loop except that it first checks the consistency of the supplied parameters and it is potentially much more efficient:

public ShortBuffer put(int index, short[] src)

Absolute bulk put method (optional operation).

This method copies shorts into this buffer from the given source array. The position of this buffer is unchanged. An invocation of this method of the form dst.put(index, src) behaves in exactly the same way as the invocation:

public final boolean hasArray()

Tells whether or not this buffer is backed by an accessible short array.

If this method returns true then the array and arrayOffset methods may safely be invoked.

public final short[] array()

Returns the short array that backs this buffer (optional operation).

Modifications to this buffer's content will cause the returned array's content to be modified, and vice versa.

Invoke the hasArray method before invoking this method in order to ensure that this buffer has an accessible backing array.

public final int arrayOffset()

Returns the offset within this buffer's backing array of the first element of the buffer (optional operation).

If this buffer is backed by an array then buffer position p corresponds to array index p + arrayOffset().

Invoke the hasArray method before invoking this method in order to ensure that this buffer has an accessible backing array.

public final ShortBuffer position(int newPosition)

Sets this buffer's position. If the mark is defined and larger than the new position then it is discarded.

public final ShortBuffer limit(int newLimit)

Sets this buffer's limit. If the position is larger than the new limit then it is set to the new limit. If the mark is defined and larger than the new limit then it is discarded.

public final ShortBuffer mark()

Sets this buffer's mark at its position.

public final ShortBuffer reset()

Resets this buffer's position to the previously-marked position.

Invoking this method neither changes nor discards the mark's value.

public final ShortBuffer clear()

Clears this buffer. The position is set to zero, the limit is set to the capacity, and the mark is discarded.

Invoke this method before using a sequence of channel-read or put operations to fill this buffer. For example:

This method does not actually erase the data in the buffer, but it is named as if it did because it will most often be used in situations in which that might as well be the case.

public final ShortBuffer flip()

Flips this buffer. The limit is set to the current position and then the position is set to zero. If the mark is defined then it is discarded.

After a sequence of channel-read or put operations, invoke this method to prepare for a sequence of channel-write or relative get operations. For example:

This method is often used in conjunction with the compact method when transferring data from one place to another.

public final ShortBuffer rewind()

Rewinds this buffer. The position is set to zero and the mark is discarded.

Invoke this method before a sequence of channel-write or get operations, assuming that the limit has already been set appropriately. For example:

public abstract ShortBuffer compact()

Compacts this buffer (optional operation).

The shorts between the buffer's current position and its limit, if any, are copied to the beginning of the buffer. That is, the short at index p = position() is copied to index zero, the short at index p + 1 is copied to index one, and so forth until the short at index limit() - 1 is copied to index n = limit() - 1 - p. The buffer's position is then set to n+1 and its limit is set to its capacity. The mark, if defined, is discarded.

The buffer's position is set to the number of shorts copied, rather than to zero, so that an invocation of this method can be followed immediately by an invocation of another relative put method.

public abstract boolean isDirect()

Tells whether or not this short buffer is direct.

public String toString()

Returns a string summarizing the state of this buffer.

public int hashCode()

Returns the current hash code of this buffer.

The hash code of a short buffer depends only upon its remaining elements; that is, upon the elements from position() up to, and including, the element at limit() - 1.

Because buffer hash codes are content-dependent, it is inadvisable to use buffers as keys in hash maps or similar data structures unless it is known that their contents will not change.

public boolean equals(Object ob)

Tells whether or not this buffer is equal to another object.

Two short buffers are equal if, and only if,

1. They have the same element type,

2. They have the same number of remaining elements, and

3. The two sequences of remaining elements, considered independently of their starting positions, are pointwise equal.

A short buffer is not equal to any other type of object.

public int compareTo(ShortBuffer that)

Compares this buffer to another.

Two short buffers are compared by comparing their sequences of remaining elements lexicographically, without regard to the starting position of each sequence within its corresponding buffer. Pairs of short elements are compared as if by invoking Short.compare(short,short).

A short buffer is not comparable to any other type of object.

public int mismatch(ShortBuffer that)

Finds and returns the relative index of the first mismatch between this buffer and a given buffer. The index is relative to the position of each buffer and will be in the range of 0 (inclusive) up to the smaller of the remaining elements in each buffer (exclusive).

If the two buffers share a common prefix then the returned index is the length of the common prefix and it follows that there is a mismatch between the two buffers at that index within the respective buffers. If one buffer is a proper prefix of the other then the returned index is the smaller of the remaining elements in each buffer, and it follows that the index is only valid for the buffer with the larger number of remaining elements. Otherwise, there is no mismatch.

public abstract ByteOrder order()

Retrieves this buffer's byte order.

The byte order of a short buffer created by allocation or by wrapping an existing short array is the native order of the underlying hardware. The byte order of a short buffer created as a view of a byte buffer is that of the byte buffer at the moment that the view is created.