This module defines two classes, Mailbox
and Message
, for accessing and manipulating on-disk mailboxes and the messages they contain. Mailbox
offers a dictionary-like mapping from keys to messages. Message
extends the email.message
module’s Message
class with format-specific state and behavior. Supported mailbox formats are Maildir, mbox, MH, Babyl, and MMDF.
See also
Module
email
Represent and manipulate messages.
class mailbox.Mailbox
A mailbox, which may be inspected and modified.
The Mailbox
class defines an interface and is not intended to be instantiated. Instead, format-specific subclasses should inherit from Mailbox
and your code should instantiate a particular subclass.
The Mailbox
interface is dictionary-like, with small keys corresponding to messages. Keys are issued by the Mailbox
instance with which they will be used and are only meaningful to that Mailbox
instance. A key continues to identify a message even if the corresponding message is modified, such as by replacing it with another message.
Messages may be added to a Mailbox
instance using the set-like method add()
and removed using a del
statement or the set-like methods remove()
and discard()
.
Mailbox
interface semantics differ from dictionary semantics in some noteworthy ways. Each time a message is requested, a new representation (typically a Message
instance) is generated based upon the current state of the mailbox. Similarly, when a message is added to a Mailbox
instance, the provided message representation’s contents are copied. In neither case is a reference to the message representation kept by the Mailbox
instance.
The default Mailbox
iterator iterates over message representations, not keys as the default dictionary iterator does. Moreover, modification of a mailbox during iteration is safe and well-defined. Messages added to the mailbox after an iterator is created will not be seen by the iterator. Messages removed from the mailbox before the iterator yields them will be silently skipped, though using a key from an iterator may result in a KeyError
exception if the corresponding message is subsequently removed.
Warning
Be very cautious when modifying mailboxes that might be simultaneously changed by some other process. The safest mailbox format to use for such tasks is Maildir; try to avoid using single-file formats such as mbox for concurrent writing. If you’re modifying a mailbox, you must lock it by calling the lock()
and unlock()
methods before reading any messages in the file or making any changes by adding or deleting a message. Failing to lock the mailbox runs the risk of losing messages or corrupting the entire mailbox.
Mailbox
instances have the following methods:
add(message)
Add message to the mailbox and return the key that has been assigned to it.
Parameter message may be a Message
instance, an email.message.Message
instance, a string, or a file-like object (which should be open in text mode). If message is an instance of the appropriate format-specific Message
subclass (e.g., if it’s an mboxMessage
instance and this is an mbox
instance), its format-specific information is used. Otherwise, reasonable defaults for format-specific information are used.
remove(key)
__delitem__(key)
discard(key)
Delete the message corresponding to key from the mailbox.
If no such message exists, a KeyError
exception is raised if the method was called as remove()
or __delitem__()
but no exception is raised if the method was called as discard()
. The behavior of discard()
may be preferred if the underlying mailbox format supports concurrent modification by other processes.
__setitem__(key, message)
Replace the message corresponding to key with message. Raise a KeyError
exception if no message already corresponds to key.
As with add()
, parameter message may be a Message
instance, an email.message.Message
instance, a string, or a file-like object (which should be open in text mode). If message is an instance of the appropriate format-specific Message
subclass (e.g., if it’s an mboxMessage
instance and this is an mbox
instance), its format-specific information is used. Otherwise, the format-specific information of the message that currently corresponds to key is left unchanged.
iterkeys()
keys()
Return an iterator over all keys if called as iterkeys()
or return a list of keys if called as keys()
.
itervalues()
__iter__()
values()
Return an iterator over representations of all messages if called as itervalues()
or __iter__()
or return a list of such representations if called as values()
. The messages are represented as instances of the appropriate format-specific Message
subclass unless a custom message factory was specified when the Mailbox
instance was initialized.
Note
The behavior of __iter__()
is unlike that of dictionaries, which iterate over keys.
iteritems()
items()
Return an iterator over (key, message) pairs, where key is a key and message is a message representation, if called as iteritems()
or return a list of such pairs if called as items()
. The messages are represented as instances of the appropriate format-specific Message
subclass unless a custom message factory was specified when the Mailbox
instance was initialized.
get(key, default=None)
__getitem__(key)
Return a representation of the message corresponding to key. If no such message exists, default is returned if the method was called as get()
and a KeyError
exception is raised if the method was called as __getitem__()
. The message is represented as an instance of the appropriate format-specific Message
subclass unless a custom message factory was specified when the Mailbox
instance was initialized.
get_message(key)
Return a representation of the message corresponding to key as an instance of the appropriate format-specific Message
subclass, or raise a KeyError
exception if no such message exists.
get_string(key)
Return a string representation of the message corresponding to key, or raise a KeyError
exception if no such message exists.
get_file(key)
Return a file-like representation of the message corresponding to key, or raise a KeyError
exception if no such message exists. The file-like object behaves as if open in binary mode. This file should be closed once it is no longer needed.
Note
Unlike other representations of messages, file-like representations are not necessarily independent of the Mailbox
instance that created them or of the underlying mailbox. More specific documentation is provided by each subclass.
has_key(key)
__contains__(key)
Return True
if key corresponds to a message, False
otherwise.
__len__()
Return a count of messages in the mailbox.
clear()
Delete all messages from the mailbox.
pop(key[, default])
Return a representation of the message corresponding to key and delete the message. If no such message exists, return default if it was supplied or else raise a KeyError
exception. The message is represented as an instance of the appropriate format-specific Message
subclass unless a custom message factory was specified when the Mailbox
instance was initialized.
popitem()
Return an arbitrary (key, message) pair, where key is a key and message is a message representation, and delete the corresponding message. If the mailbox is empty, raise a KeyError
exception. The message is represented as an instance of the appropriate format-specific Message
subclass unless a custom message factory was specified when the Mailbox
instance was initialized.
update(arg)
Parameter arg should be a key-to-message mapping or an iterable of (key, message) pairs. Updates the mailbox so that, for each given key and message, the message corresponding to key is set to message as if by using __setitem__()
. As with __setitem__()
, each key must already correspond to a message in the mailbox or else a KeyError
exception will be raised, so in general it is incorrect for arg to be a Mailbox
instance.
Note
Unlike with dictionaries, keyword arguments are not supported.
flush()
Write any pending changes to the filesystem. For some Mailbox
subclasses, changes are always written immediately and flush()
does nothing, but you should still make a habit of calling this method.
lock()
Acquire an exclusive advisory lock on the mailbox so that other processes know not to modify it. An ExternalClashError
is raised if the lock is not available. The particular locking mechanisms used depend upon the mailbox format. You should always lock the mailbox before making any modifications to its contents.
unlock()
Release the lock on the mailbox, if any.
close()
Flush the mailbox, unlock it if necessary, and close any open files. For some Mailbox
subclasses, this method does nothing.
Maildir
class mailbox.Maildir(dirname, factory=rfc822.Message, create=True)
A subclass of Mailbox
for mailboxes in Maildir format. Parameter factory is a callable object that accepts a file-like message representation (which behaves as if opened in binary mode) and returns a custom representation. If factory is None
, MaildirMessage
is used as the default message representation. If create is True
, the mailbox is created if it does not exist.
It is for historical reasons that factory defaults to rfc822.Message
and that dirname is named as such rather than path. For a Maildir
instance that behaves like instances of other Mailbox
subclasses, set factory to None
.
Maildir is a directory-based mailbox format invented for the qmail mail transfer agent and now widely supported by other programs. Messages in a Maildir mailbox are stored in separate files within a common directory structure. This design allows Maildir mailboxes to be accessed and modified by multiple unrelated programs without data corruption, so file locking is unnecessary.
Maildir mailboxes contain three subdirectories, namely: tmp
, new
, and cur
. Messages are created momentarily in the tmp
subdirectory and then moved to the new
subdirectory to finalize delivery. A mail user agent may subsequently move the message to the cur
subdirectory and store information about the state of the message in a special “info” section appended to its file name.
Folders of the style introduced by the Courier mail transfer agent are also supported. Any subdirectory of the main mailbox is considered a folder if '.'
is the first character in its name. Folder names are represented by Maildir
without the leading '.'
. Each folder is itself a Maildir mailbox but should not contain other folders. Instead, a logical nesting is indicated using '.'
to delimit levels, e.g., “Archived.2005.07”.
Note
The Maildir specification requires the use of a colon (':'
) in certain message file names. However, some operating systems do not permit this character in file names, If you wish to use a Maildir-like format on such an operating system, you should specify another character to use instead. The exclamation point ('!'
) is a popular choice. For example:
import mailbox mailbox.Maildir.colon = '!'
The colon
attribute may also be set on a per-instance basis.
Maildir
instances have all of the methods of Mailbox
in addition to the following:
list_folders()
Return a list of the names of all folders.
get_folder(folder)
Return a Maildir
instance representing the folder whose name is folder. A NoSuchMailboxError
exception is raised if the folder does not exist.
add_folder(folder)
Create a folder whose name is folder and return a Maildir
instance representing it.
remove_folder(folder)
Delete the folder whose name is folder. If the folder contains any messages, a NotEmptyError
exception will be raised and the folder will not be deleted.
clean()
Delete temporary files from the mailbox that have not been accessed in the last 36 hours. The Maildir specification says that mail-reading programs should do this occasionally.
Some Mailbox
methods implemented by Maildir
deserve special remarks:
add(message)
__setitem__(key, message)
update(arg)
Warning
These methods generate unique file names based upon the current process ID. When using multiple threads, undetected name clashes may occur and cause corruption of the mailbox unless threads are coordinated to avoid using these methods to manipulate the same mailbox simultaneously.
flush()
All changes to Maildir mailboxes are immediately applied, so this method does nothing.
lock()
unlock()
Maildir mailboxes do not support (or require) locking, so these methods do nothing.
close()
Maildir
instances do not keep any open files and the underlying mailboxes do not support locking, so this method does nothing.
get_file(key)
Depending upon the host platform, it may not be possible to modify or remove the underlying message while the returned file remains open.
See also
The original specification of the format.
Notes on Maildir by its inventor. Includes an updated name-creation scheme and details on “info” semantics.
Another specification of the format. Describes a common extension for supporting folders.
mbox
class mailbox.mbox(path, factory=None, create=True)
A subclass of Mailbox
for mailboxes in mbox format. Parameter factory is a callable object that accepts a file-like message representation (which behaves as if opened in binary mode) and returns a custom representation. If factory is None
, mboxMessage
is used as the default message representation. If create is True
, the mailbox is created if it does not exist.
The mbox format is the classic format for storing mail on Unix systems. All messages in an mbox mailbox are stored in a single file with the beginning of each message indicated by a line whose first five characters are “From “.
Several variations of the mbox format exist to address perceived shortcomings in the original. In the interest of compatibility, mbox
implements the original format, which is sometimes referred to as mboxo. This means that the Content-Length header, if present, is ignored and that any occurrences of “From ” at the beginning of a line in a message body are transformed to “>From ” when storing the message, although occurrences of “>From ” are not transformed to “From ” when reading the message.
Some Mailbox
methods implemented by mbox
deserve special remarks:
get_file(key)
Using the file after calling flush()
or close()
on the mbox
instance may yield unpredictable results or raise an exception.
lock()
unlock()
Three locking mechanisms are used—dot locking and, if available, the flock()
and lockf()
system calls.
See also
A specification of the format and its variations.
Another specification of the format, with details on locking.
An argument for using the original mbox format rather than a variation.
A history of mbox variations.
MH
class mailbox.MH(path, factory=None, create=True)
A subclass of Mailbox
for mailboxes in MH format. Parameter factory is a callable object that accepts a file-like message representation (which behaves as if opened in binary mode) and returns a custom representation. If factory is None
, MHMessage
is used as the default message representation. If create is True
, the mailbox is created if it does not exist.
MH is a directory-based mailbox format invented for the MH Message Handling System, a mail user agent. Each message in an MH mailbox resides in its own file. An MH mailbox may contain other MH mailboxes (called folders) in addition to messages. Folders may be nested indefinitely. MH mailboxes also support sequences, which are named lists used to logically group messages without moving them to sub-folders. Sequences are defined in a file called .mh_sequences
in each folder.
The MH
class manipulates MH mailboxes, but it does not attempt to emulate all of mh’s behaviors. In particular, it does not modify and is not affected by the context
or .mh_profile
files that are used by mh to store its state and configuration.
MH
instances have all of the methods of Mailbox
in addition to the following:
list_folders()
Return a list of the names of all folders.
get_folder(folder)
Return an MH
instance representing the folder whose name is folder. A NoSuchMailboxError
exception is raised if the folder does not exist.
add_folder(folder)
Create a folder whose name is folder and return an MH
instance representing it.
remove_folder(folder)
Delete the folder whose name is folder. If the folder contains any messages, a NotEmptyError
exception will be raised and the folder will not be deleted.
get_sequences()
Return a dictionary of sequence names mapped to key lists. If there are no sequences, the empty dictionary is returned.
set_sequences(sequences)
Re-define the sequences that exist in the mailbox based upon sequences, a dictionary of names mapped to key lists, like returned by get_sequences()
.
pack()
Rename messages in the mailbox as necessary to eliminate gaps in numbering. Entries in the sequences list are updated correspondingly.
Note
Already-issued keys are invalidated by this operation and should not be subsequently used.
Some Mailbox
methods implemented by MH
deserve special remarks:
remove(key)
__delitem__(key)
discard(key)
These methods immediately delete the message. The MH convention of marking a message for deletion by prepending a comma to its name is not used.
lock()
unlock()
Three locking mechanisms are used—dot locking and, if available, the flock()
and lockf()
system calls. For MH mailboxes, locking the mailbox means locking the .mh_sequences
file and, only for the duration of any operations that affect them, locking individual message files.
get_file(key)
Depending upon the host platform, it may not be possible to remove the underlying message while the returned file remains open.
flush()
All changes to MH mailboxes are immediately applied, so this method does nothing.
See also
Home page of nmh, an updated version of the original mh.
A GPL-licensed book on mh and nmh, with some information on the mailbox format.
Babyl
class mailbox.Babyl(path, factory=None, create=True)
A subclass of Mailbox
for mailboxes in Babyl format. Parameter factory is a callable object that accepts a file-like message representation (which behaves as if opened in binary mode) and returns a custom representation. If factory is None
, BabylMessage
is used as the default message representation. If create is True
, the mailbox is created if it does not exist.
Babyl is a single-file mailbox format used by the Rmail mail user agent included with Emacs. The beginning of a message is indicated by a line containing the two characters Control-Underscore ('\037'
) and Control-L ('\014'
). The end of a message is indicated by the start of the next message or, in the case of the last message, a line containing a Control-Underscore ('\037'
) character.
Messages in a Babyl mailbox have two sets of headers, original headers and so-called visible headers. Visible headers are typically a subset of the original headers that have been reformatted or abridged to be more attractive. Each message in a Babyl mailbox also has an accompanying list of labels, or short strings that record extra information about the message, and a list of all user-defined labels found in the mailbox is kept in the Babyl options section.
Babyl
instances have all of the methods of Mailbox
in addition to the following:
get_labels()
Return a list of the names of all user-defined labels used in the mailbox.
Note
The actual messages are inspected to determine which labels exist in the mailbox rather than consulting the list of labels in the Babyl options section, but the Babyl section is updated whenever the mailbox is modified.
Some Mailbox
methods implemented by Babyl
deserve special remarks:
get_file(key)
In Babyl mailboxes, the headers of a message are not stored contiguously with the body of the message. To generate a file-like representation, the headers and body are copied together into a StringIO
instance (from the StringIO
module), which has an API identical to that of a file. As a result, the file-like object is truly independent of the underlying mailbox but does not save memory compared to a string representation.
lock()
unlock()
Three locking mechanisms are used—dot locking and, if available, the flock()
and lockf()
system calls.
See also
A specification of the Babyl format.
The Rmail manual, with some information on Babyl semantics.
MMDF
class mailbox.MMDF(path, factory=None, create=True)
A subclass of Mailbox
for mailboxes in MMDF format. Parameter factory is a callable object that accepts a file-like message representation (which behaves as if opened in binary mode) and returns a custom representation. If factory is None
, MMDFMessage
is used as the default message representation. If create is True
, the mailbox is created if it does not exist.
MMDF is a single-file mailbox format invented for the Multichannel Memorandum Distribution Facility, a mail transfer agent. Each message is in the same form as an mbox message but is bracketed before and after by lines containing four Control-A ('\001'
) characters. As with the mbox format, the beginning of each message is indicated by a line whose first five characters are “From “, but additional occurrences of “From ” are not transformed to “>From ” when storing messages because the extra message separator lines prevent mistaking such occurrences for the starts of subsequent messages.
Some Mailbox
methods implemented by MMDF
deserve special remarks:
get_file(key)
Using the file after calling flush()
or close()
on the MMDF
instance may yield unpredictable results or raise an exception.
lock()
unlock()
Three locking mechanisms are used—dot locking and, if available, the flock()
and lockf()
system calls.
See also
A specification of MMDF format from the documentation of tin, a newsreader.
A Wikipedia article describing the Multichannel Memorandum Distribution Facility.
class mailbox.Message([message])
A subclass of the email.message
module’s Message
. Subclasses of mailbox.Message
add mailbox-format-specific state and behavior.
If message is omitted, the new instance is created in a default, empty state. If message is an email.message.Message
instance, its contents are copied; furthermore, any format-specific information is converted insofar as possible if message is a Message
instance. If message is a string or a file, it should contain an RFC 2822-compliant message, which is read and parsed.
The format-specific state and behaviors offered by subclasses vary, but in general it is only the properties that are not specific to a particular mailbox that are supported (although presumably the properties are specific to a particular mailbox format). For example, file offsets for single-file mailbox formats and file names for directory-based mailbox formats are not retained, because they are only applicable to the original mailbox. But state such as whether a message has been read by the user or marked as important is retained, because it applies to the message itself.
There is no requirement that Message
instances be used to represent messages retrieved using Mailbox
instances. In some situations, the time and memory required to generate Message
representations might not be acceptable. For such situations, Mailbox
instances also offer string and file-like representations, and a custom message factory may be specified when a Mailbox
instance is initialized.
MaildirMessage
class mailbox.MaildirMessage([message])
A message with Maildir-specific behaviors. Parameter message has the same meaning as with the Message
constructor.
Typically, a mail user agent application moves all of the messages in the new
subdirectory to the cur
subdirectory after the first time the user opens and closes the mailbox, recording that the messages are old whether or not they’ve actually been read. Each message in cur
has an “info” section added to its file name to store information about its state. (Some mail readers may also add an “info” section to messages in new
.) The “info” section may take one of two forms: it may contain “2,” followed by a list of standardized flags (e.g., “2,FR”) or it may contain “1,” followed by so-called experimental information. Standard flags for Maildir messages are as follows:
Flag | Meaning | Explanation |
---|---|---|
D | Draft | Under composition |
F | Flagged | Marked as important |
P | Passed | Forwarded, resent, or bounced |
R | Replied | Replied to |
S | Seen | Read |
T | Trashed | Marked for subsequent deletion |
MaildirMessage
instances offer the following methods:
get_subdir()
Return either “new” (if the message should be stored in the new
subdirectory) or “cur” (if the message should be stored in the cur
subdirectory).
Note
A message is typically moved from new
to cur
after its mailbox has been accessed, whether or not the message is has been read. A message msg
has been read if "S" in msg.get_flags()
is True
.
set_subdir(subdir)
Set the subdirectory the message should be stored in. Parameter subdir must be either “new” or “cur”.
get_flags()
Return a string specifying the flags that are currently set. If the message complies with the standard Maildir format, the result is the concatenation in alphabetical order of zero or one occurrence of each of 'D'
, 'F'
, 'P'
, 'R'
, 'S'
, and 'T'
. The empty string is returned if no flags are set or if “info” contains experimental semantics.
set_flags(flags)
Set the flags specified by flags and unset all others.
add_flag(flag)
Set the flag(s) specified by flag without changing other flags. To add more than one flag at a time, flag may be a string of more than one character. The current “info” is overwritten whether or not it contains experimental information rather than flags.
remove_flag(flag)
Unset the flag(s) specified by flag without changing other flags. To remove more than one flag at a time, flag maybe a string of more than one character. If “info” contains experimental information rather than flags, the current “info” is not modified.
get_date()
Return the delivery date of the message as a floating-point number representing seconds since the epoch.
set_date(date)
Set the delivery date of the message to date, a floating-point number representing seconds since the epoch.
get_info()
Return a string containing the “info” for a message. This is useful for accessing and modifying “info” that is experimental (i.e., not a list of flags).
set_info(info)
Set “info” to info, which should be a string.
When a MaildirMessage
instance is created based upon an mboxMessage
or MMDFMessage
instance, the Status and X-Status headers are omitted and the following conversions take place:
Resulting state |
|
---|---|
“cur” subdirectory | O flag |
F flag | F flag |
R flag | A flag |
S flag | R flag |
T flag | D flag |
When a MaildirMessage
instance is created based upon an MHMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
“cur” subdirectory | “unseen” sequence |
“cur” subdirectory and S flag | no “unseen” sequence |
F flag | “flagged” sequence |
R flag | “replied” sequence |
When a MaildirMessage
instance is created based upon a BabylMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
“cur” subdirectory | “unseen” label |
“cur” subdirectory and S flag | no “unseen” label |
P flag | “forwarded” or “resent” label |
R flag | “answered” label |
T flag | “deleted” label |
mboxMessage
class mailbox.mboxMessage([message])
A message with mbox-specific behaviors. Parameter message has the same meaning as with the Message
constructor.
Messages in an mbox mailbox are stored together in a single file. The sender’s envelope address and the time of delivery are typically stored in a line beginning with “From ” that is used to indicate the start of a message, though there is considerable variation in the exact format of this data among mbox implementations. Flags that indicate the state of the message, such as whether it has been read or marked as important, are typically stored in Status and X-Status headers.
Conventional flags for mbox messages are as follows:
Flag | Meaning | Explanation |
---|---|---|
R | Read | Read |
O | Old | Previously detected by MUA |
D | Deleted | Marked for subsequent deletion |
F | Flagged | Marked as important |
A | Answered | Replied to |
The “R” and “O” flags are stored in the Status header, and the “D”, “F”, and “A” flags are stored in the X-Status header. The flags and headers typically appear in the order mentioned.
mboxMessage
instances offer the following methods:
get_from()
Return a string representing the “From ” line that marks the start of the message in an mbox mailbox. The leading “From ” and the trailing newline are excluded.
set_from(from_, time_=None)
Set the “From ” line to from_, which should be specified without a leading “From ” or trailing newline. For convenience, time_ may be specified and will be formatted appropriately and appended to from_. If time_ is specified, it should be a time.struct_time
instance, a tuple suitable for passing to time.strftime()
, or True
(to use time.gmtime()
).
get_flags()
Return a string specifying the flags that are currently set. If the message complies with the conventional format, the result is the concatenation in the following order of zero or one occurrence of each of 'R'
, 'O'
, 'D'
, 'F'
, and 'A'
.
set_flags(flags)
Set the flags specified by flags and unset all others. Parameter flags should be the concatenation in any order of zero or more occurrences of each of 'R'
, 'O'
, 'D'
, 'F'
, and 'A'
.
add_flag(flag)
Set the flag(s) specified by flag without changing other flags. To add more than one flag at a time, flag may be a string of more than one character.
remove_flag(flag)
Unset the flag(s) specified by flag without changing other flags. To remove more than one flag at a time, flag maybe a string of more than one character.
When an mboxMessage
instance is created based upon a MaildirMessage
instance, a “From ” line is generated based upon the MaildirMessage
instance’s delivery date, and the following conversions take place:
Resulting state |
|
---|---|
R flag | S flag |
O flag | “cur” subdirectory |
D flag | T flag |
F flag | F flag |
A flag | R flag |
When an mboxMessage
instance is created based upon an MHMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
R flag and O flag | no “unseen” sequence |
O flag | “unseen” sequence |
F flag | “flagged” sequence |
A flag | “replied” sequence |
When an mboxMessage
instance is created based upon a BabylMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
R flag and O flag | no “unseen” label |
O flag | “unseen” label |
D flag | “deleted” label |
A flag | “answered” label |
When a Message
instance is created based upon an MMDFMessage
instance, the “From ” line is copied and all flags directly correspond:
Resulting state |
|
---|---|
R flag | R flag |
O flag | O flag |
D flag | D flag |
F flag | F flag |
A flag | A flag |
MHMessage
class mailbox.MHMessage([message])
A message with MH-specific behaviors. Parameter message has the same meaning as with the Message
constructor.
MH messages do not support marks or flags in the traditional sense, but they do support sequences, which are logical groupings of arbitrary messages. Some mail reading programs (although not the standard mh and nmh) use sequences in much the same way flags are used with other formats, as follows:
Sequence | Explanation |
---|---|
unseen | Not read, but previously detected by MUA |
replied | Replied to |
flagged | Marked as important |
MHMessage
instances offer the following methods:
get_sequences()
Return a list of the names of sequences that include this message.
set_sequences(sequences)
Set the list of sequences that include this message.
add_sequence(sequence)
Add sequence to the list of sequences that include this message.
remove_sequence(sequence)
Remove sequence from the list of sequences that include this message.
When an MHMessage
instance is created based upon a MaildirMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
“unseen” sequence | no S flag |
“replied” sequence | R flag |
“flagged” sequence | F flag |
When an MHMessage
instance is created based upon an mboxMessage
or MMDFMessage
instance, the Status and X-Status headers are omitted and the following conversions take place:
Resulting state |
|
---|---|
“unseen” sequence | no R flag |
“replied” sequence | A flag |
“flagged” sequence | F flag |
When an MHMessage
instance is created based upon a BabylMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
“unseen” sequence | “unseen” label |
“replied” sequence | “answered” label |
BabylMessage
class mailbox.BabylMessage([message])
A message with Babyl-specific behaviors. Parameter message has the same meaning as with the Message
constructor.
Certain message labels, called attributes, are defined by convention to have special meanings. The attributes are as follows:
Label | Explanation |
---|---|
unseen | Not read, but previously detected by MUA |
deleted | Marked for subsequent deletion |
filed | Copied to another file or mailbox |
answered | Replied to |
forwarded | Forwarded |
edited | Modified by the user |
resent | Resent |
By default, Rmail displays only visible headers. The BabylMessage
class, though, uses the original headers because they are more complete. Visible headers may be accessed explicitly if desired.
BabylMessage
instances offer the following methods:
get_labels()
Return a list of labels on the message.
set_labels(labels)
Set the list of labels on the message to labels.
add_label(label)
Add label to the list of labels on the message.
remove_label(label)
Remove label from the list of labels on the message.
get_visible()
Return an Message
instance whose headers are the message’s visible headers and whose body is empty.
set_visible(visible)
Set the message’s visible headers to be the same as the headers in message. Parameter visible should be a Message
instance, an email.message.Message
instance, a string, or a file-like object (which should be open in text mode).
update_visible()
When a BabylMessage
instance’s original headers are modified, the visible headers are not automatically modified to correspond. This method updates the visible headers as follows: each visible header with a corresponding original header is set to the value of the original header, each visible header without a corresponding original header is removed, and any of Date, From, Reply-To, To, CC, and Subject that are present in the original headers but not the visible headers are added to the visible headers.
When a BabylMessage
instance is created based upon a MaildirMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
“unseen” label | no S flag |
“deleted” label | T flag |
“answered” label | R flag |
“forwarded” label | P flag |
When a BabylMessage
instance is created based upon an mboxMessage
or MMDFMessage
instance, the Status and X-Status headers are omitted and the following conversions take place:
Resulting state |
|
---|---|
“unseen” label | no R flag |
“deleted” label | D flag |
“answered” label | A flag |
When a BabylMessage
instance is created based upon an MHMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
“unseen” label | “unseen” sequence |
“answered” label | “replied” sequence |
MMDFMessage
class mailbox.MMDFMessage([message])
A message with MMDF-specific behaviors. Parameter message has the same meaning as with the Message
constructor.
As with message in an mbox mailbox, MMDF messages are stored with the sender’s address and the delivery date in an initial line beginning with “From “. Likewise, flags that indicate the state of the message are typically stored in Status and X-Status headers.
Conventional flags for MMDF messages are identical to those of mbox message and are as follows:
Flag | Meaning | Explanation |
---|---|---|
R | Read | Read |
O | Old | Previously detected by MUA |
D | Deleted | Marked for subsequent deletion |
F | Flagged | Marked as important |
A | Answered | Replied to |
The “R” and “O” flags are stored in the Status header, and the “D”, “F”, and “A” flags are stored in the X-Status header. The flags and headers typically appear in the order mentioned.
MMDFMessage
instances offer the following methods, which are identical to those offered by mboxMessage
:
get_from()
Return a string representing the “From ” line that marks the start of the message in an mbox mailbox. The leading “From ” and the trailing newline are excluded.
set_from(from_, time_=None)
Set the “From ” line to from_, which should be specified without a leading “From ” or trailing newline. For convenience, time_ may be specified and will be formatted appropriately and appended to from_. If time_ is specified, it should be a time.struct_time
instance, a tuple suitable for passing to time.strftime()
, or True
(to use time.gmtime()
).
get_flags()
Return a string specifying the flags that are currently set. If the message complies with the conventional format, the result is the concatenation in the following order of zero or one occurrence of each of 'R'
, 'O'
, 'D'
, 'F'
, and 'A'
.
set_flags(flags)
Set the flags specified by flags and unset all others. Parameter flags should be the concatenation in any order of zero or more occurrences of each of 'R'
, 'O'
, 'D'
, 'F'
, and 'A'
.
add_flag(flag)
Set the flag(s) specified by flag without changing other flags. To add more than one flag at a time, flag may be a string of more than one character.
remove_flag(flag)
Unset the flag(s) specified by flag without changing other flags. To remove more than one flag at a time, flag maybe a string of more than one character.
When an MMDFMessage
instance is created based upon a MaildirMessage
instance, a “From ” line is generated based upon the MaildirMessage
instance’s delivery date, and the following conversions take place:
Resulting state |
|
---|---|
R flag | S flag |
O flag | “cur” subdirectory |
D flag | T flag |
F flag | F flag |
A flag | R flag |
When an MMDFMessage
instance is created based upon an MHMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
R flag and O flag | no “unseen” sequence |
O flag | “unseen” sequence |
F flag | “flagged” sequence |
A flag | “replied” sequence |
When an MMDFMessage
instance is created based upon a BabylMessage
instance, the following conversions take place:
Resulting state |
|
---|---|
R flag and O flag | no “unseen” label |
O flag | “unseen” label |
D flag | “deleted” label |
A flag | “answered” label |
When an MMDFMessage
instance is created based upon an mboxMessage
instance, the “From ” line is copied and all flags directly correspond:
Resulting state |
|
---|---|
R flag | R flag |
O flag | O flag |
D flag | D flag |
F flag | F flag |
A flag | A flag |
The following exception classes are defined in the mailbox
module:
exception mailbox.Error
The based class for all other module-specific exceptions.
exception mailbox.NoSuchMailboxError
Raised when a mailbox is expected but is not found, such as when instantiating a Mailbox
subclass with a path that does not exist (and with the create parameter set to False
), or when opening a folder that does not exist.
exception mailbox.NotEmptyError
Raised when a mailbox is not empty but is expected to be, such as when deleting a folder that contains messages.
exception mailbox.ExternalClashError
Raised when some mailbox-related condition beyond the control of the program causes it to be unable to proceed, such as when failing to acquire a lock that another program already holds a lock, or when a uniquely-generated file name already exists.
exception mailbox.FormatError
Raised when the data in a file cannot be parsed, such as when an MH
instance attempts to read a corrupted .mh_sequences
file.
Deprecated since version 2.6.
Older versions of the mailbox
module do not support modification of mailboxes, such as adding or removing message, and do not provide classes to represent format-specific message properties. For backward compatibility, the older mailbox classes are still available, but the newer classes should be used in preference to them. The old classes have been removed in Python 3.
Older mailbox objects support only iteration and provide a single public method:
oldmailbox.next()
Return the next message in the mailbox, created with the optional factory argument passed into the mailbox object’s constructor. By default this is an rfc822.Message
object (see the rfc822
module). Depending on the mailbox implementation the fp attribute of this object may be a true file object or a class instance simulating a file object, taking care of things like message boundaries if multiple mail messages are contained in a single file, etc. If no more messages are available, this method returns None
.
Most of the older mailbox classes have names that differ from the current mailbox class names, except for Maildir
. For this reason, the new Maildir
class defines a next()
method and its constructor differs slightly from those of the other new mailbox classes.
The older mailbox classes whose names are not the same as their newer counterparts are as follows:
class mailbox.UnixMailbox(fp[, factory])
Access to a classic Unix-style mailbox, where all messages are contained in a single file and separated by From
(a.k.a. From_
) lines. The file object fp points to the mailbox file. The optional factory parameter is a callable that should create new message objects. factory is called with one argument, fp by the next()
method of the mailbox object. The default is the rfc822.Message
class (see the rfc822
module – and the note below).
Note
For reasons of this module’s internal implementation, you will probably want to open the fp object in binary mode. This is especially important on Windows.
For maximum portability, messages in a Unix-style mailbox are separated by any line that begins exactly with the string 'From '
(note the trailing space) if preceded by exactly two newlines. Because of the wide-range of variations in practice, nothing else on the From_
line should be considered. However, the current implementation doesn’t check for the leading two newlines. This is usually fine for most applications.
The UnixMailbox
class implements a more strict version of From_
line checking, using a regular expression that usually correctly matched From_
delimiters. It considers delimiter line to be separated by From
name time
lines. For maximum portability, use the PortableUnixMailbox
class instead. This class is identical to UnixMailbox
except that individual messages are separated by only From
lines.
class mailbox.PortableUnixMailbox(fp[, factory])
A less-strict version of UnixMailbox
, which considers only the From
at the beginning of the line separating messages. The “name time” portion of the From line is ignored, to protect against some variations that are observed in practice. This works since lines in the message which begin with 'From '
are quoted by mail handling software at delivery-time.
class mailbox.MmdfMailbox(fp[, factory])
Access an MMDF-style mailbox, where all messages are contained in a single file and separated by lines consisting of 4 control-A characters. The file object fp points to the mailbox file. Optional factory is as with the UnixMailbox
class.
class mailbox.MHMailbox(dirname[, factory])
Access an MH mailbox, a directory with each message in a separate file with a numeric name. The name of the mailbox directory is passed in dirname. factory is as with the UnixMailbox
class.
class mailbox.BabylMailbox(fp[, factory])
Access a Babyl mailbox, which is similar to an MMDF mailbox. In Babyl format, each message has two sets of headers, the original headers and the visible headers. The original headers appear before a line containing only '*** EOOH
***'
(End-Of-Original-Headers) and the visible headers appear after the EOOH
line. Babyl-compliant mail readers will show you only the visible headers, and BabylMailbox
objects will return messages containing only the visible headers. You’ll have to do your own parsing of the mailbox file to get at the original headers. Mail messages start with the EOOH line and end with a line containing only '\037\014'
. factory is as with the UnixMailbox
class.
If you wish to use the older mailbox classes with the email
module rather than the deprecated rfc822
module, you can do so as follows:
import email import email.Errors import mailbox def msgfactory(fp): try: return email.message_from_file(fp) except email.Errors.MessageParseError: # Don't return None since that will # stop the mailbox iterator return '' mbox = mailbox.UnixMailbox(fp, msgfactory)
Alternatively, if you know your mailbox contains only well-formed MIME messages, you can simplify this to:
import email import mailbox mbox = mailbox.UnixMailbox(fp, email.message_from_file)
A simple example of printing the subjects of all messages in a mailbox that seem interesting:
import mailbox for message in mailbox.mbox('~/mbox'): subject = message['subject'] # Could possibly be None. if subject and 'python' in subject.lower(): print subject
To copy all mail from a Babyl mailbox to an MH mailbox, converting all of the format-specific information that can be converted:
import mailbox destination = mailbox.MH('~/Mail') destination.lock() for message in mailbox.Babyl('~/RMAIL'): destination.add(mailbox.MHMessage(message)) destination.flush() destination.unlock()
This example sorts mail from several mailing lists into different mailboxes, being careful to avoid mail corruption due to concurrent modification by other programs, mail loss due to interruption of the program, or premature termination due to malformed messages in the mailbox:
import mailbox import email.errors list_names = ('python-list', 'python-dev', 'python-bugs') boxes = dict((name, mailbox.mbox('~/email/%s' % name)) for name in list_names) inbox = mailbox.Maildir('~/Maildir', factory=None) for key in inbox.iterkeys(): try: message = inbox[key] except email.errors.MessageParseError: continue # The message is malformed. Just leave it. for name in list_names: list_id = message['list-id'] if list_id and name in list_id: # Get mailbox to use box = boxes[name] # Write copy to disk before removing original. # If there's a crash, you might duplicate a message, but # that's better than losing a message completely. box.lock() box.add(message) box.flush() box.unlock() # Remove original message inbox.lock() inbox.discard(key) inbox.flush() inbox.unlock() break # Found destination, so stop looking. for box in boxes.itervalues(): box.close()
© 2001–2020 Python Software Foundation
Licensed under the PSF License.
https://docs.python.org/2.7/library/mailbox.html