Representation of a camera in 3D space. More...
| Header: | #include <Q3DCamera> |
| Since: | QtDataVisualization 1.0 |
| Instantiated By: | Camera3D |
| Inherits: | Q3DObject |
| enum | CameraPreset { CameraPresetNone, CameraPresetFrontLow, CameraPresetFront, CameraPresetFrontHigh, CameraPresetLeftLow, …, CameraPresetDirectlyBelow } |
|
|
| Q3DCamera(QObject *parent = nullptr) | |
| virtual | ~Q3DCamera() |
| Q3DCamera::CameraPreset | cameraPreset() const |
| float | maxZoomLevel() const |
| float | minZoomLevel() const |
| void | setCameraPosition(float horizontal, float vertical, float zoom = 100.0f) |
| void | setCameraPreset(Q3DCamera::CameraPreset preset) |
| void | setMaxZoomLevel(float zoomLevel) |
| void | setMinZoomLevel(float zoomLevel) |
| void | setTarget(const QVector3D &target) |
| void | setWrapXRotation(bool isEnabled) |
| void | setWrapYRotation(bool isEnabled) |
| void | setXRotation(float rotation) |
| void | setYRotation(float rotation) |
| void | setZoomLevel(float zoomLevel) |
| QVector3D | target() const |
| bool | wrapXRotation() const |
| bool | wrapYRotation() const |
| float | xRotation() const |
| float | yRotation() const |
| float | zoomLevel() const |
| virtual void | copyValuesFrom(const Q3DObject &source) override |
| void | cameraPresetChanged(Q3DCamera::CameraPreset preset) |
| void | maxZoomLevelChanged(float zoomLevel) |
| void | minZoomLevelChanged(float zoomLevel) |
| void | targetChanged(const QVector3D &target) |
| void | wrapXRotationChanged(bool isEnabled) |
| void | wrapYRotationChanged(bool isEnabled) |
| void | xRotationChanged(float rotation) |
| void | yRotationChanged(float rotation) |
| void | zoomLevelChanged(float zoomLevel) |
Q3DCamera represents a basic orbit around centerpoint 3D camera that is used when rendering the data visualization. The class offers simple methods for rotating the camera around the origin and setting zoom level.
Predefined positions for camera.
| Constant | Value | Description |
|---|---|---|
Q3DCamera::CameraPresetNone |
-1 |
Used to indicate a preset has not been set, or the scene has been rotated freely. |
Q3DCamera::CameraPresetFrontLow |
0 |
|
Q3DCamera::CameraPresetFront |
1 |
|
Q3DCamera::CameraPresetFrontHigh |
2 |
|
Q3DCamera::CameraPresetLeftLow |
3 |
|
Q3DCamera::CameraPresetLeft |
4 |
|
Q3DCamera::CameraPresetLeftHigh |
5 |
|
Q3DCamera::CameraPresetRightLow |
6 |
|
Q3DCamera::CameraPresetRight |
7 |
|
Q3DCamera::CameraPresetRightHigh |
8 |
|
Q3DCamera::CameraPresetBehindLow |
9 |
|
Q3DCamera::CameraPresetBehind |
10 |
|
Q3DCamera::CameraPresetBehindHigh |
11 |
|
Q3DCamera::CameraPresetIsometricLeft |
12 |
|
Q3DCamera::CameraPresetIsometricLeftHigh |
13 |
|
Q3DCamera::CameraPresetIsometricRight |
14 |
|
Q3DCamera::CameraPresetIsometricRightHigh |
15 |
|
Q3DCamera::CameraPresetDirectlyAbove |
16 |
|
Q3DCamera::CameraPresetDirectlyAboveCW45 |
17 |
|
Q3DCamera::CameraPresetDirectlyAboveCCW45 |
18 |
|
Q3DCamera::CameraPresetFrontBelow |
19 |
In Q3DBars from CameraPresetFrontBelow onward these only work for graphs including negative values. They act as Preset...Low for positive-only values. |
Q3DCamera::CameraPresetLeftBelow |
20 |
|
Q3DCamera::CameraPresetRightBelow |
21 |
|
Q3DCamera::CameraPresetBehindBelow |
22 |
|
Q3DCamera::CameraPresetDirectlyBelow |
23 |
Acts as CameraPresetFrontLow for positive-only bars. |
This property holds the currently active camera preset.
If no CameraPreset value is set, CameraPresetNone is used by default.
Access functions:
| Q3DCamera::CameraPreset | cameraPreset() const |
| void | setCameraPreset(Q3DCamera::CameraPreset preset) |
Notifier signal:
| void | cameraPresetChanged(Q3DCamera::CameraPreset preset) |
This property holds the maximum allowed camera zoom level.
If the maximum level is set to a new value that is lower than the existing minimum level, the minimum level is adjusted to the new maximum as well. If the current zoomLevel is outside the new bounds, it is adjusted as well. Defaults to 500.0f.
Access functions:
| float | maxZoomLevel() const |
| void | setMaxZoomLevel(float zoomLevel) |
Notifier signal:
| void | maxZoomLevelChanged(float zoomLevel) |
See also zoomLevel and minZoomLevel.
This property holds the minimum allowed camera zoom level.
If the minimum level is set to a new value that is higher than the existing maximum level, the maximum level is adjusted to the new minimum as well. If the current zoomLevel is outside the new bounds, it is adjusted as well. The minZoomLevel cannot be set below 1.0f. Defaults to 10.0f.
Access functions:
| float | minZoomLevel() const |
| void | setMinZoomLevel(float zoomLevel) |
Notifier signal:
| void | minZoomLevelChanged(float zoomLevel) |
See also zoomLevel and maxZoomLevel.
[since QtDataVisualization 1.2] target : QVector3D
This property holds the camera target as a vector or vertex in the 3D space.
Defaults to QVector3D(0.0, 0.0, 0.0).
Valid coordinate values are between -1.0...1.0, where the edge values indicate the edges of the corresponding axis range. Any values outside this range are clamped to the edge.
Note: For bar graphs, the Y-coordinate is ignored and camera always targets a point on the horizontal background.
This property was introduced in QtDataVisualization 1.2.
Access functions:
| QVector3D | target() const |
| void | setTarget(const QVector3D &target) |
Notifier signal:
| void | targetChanged(const QVector3D &target) |
This property holds the behavior of the minimum and maximum limits in the X-rotation.
If set to true, the X-rotation of the camera is wrapped from minimum to maximum and from maximum to minimum. If set to false, the X-rotation of the camera is limited to the sector determined by the minimum and maximum values. Set to true by default.
Access functions:
| bool | wrapXRotation() const |
| void | setWrapXRotation(bool isEnabled) |
Notifier signal:
| void | wrapXRotationChanged(bool isEnabled) |
This property holds the behavior of the minimum and maximum limits in the Y-rotation.
If true, the Y-rotation of the camera is wrapped from minimum to maximum and from maximum to minimum. If false, the Y-rotation of the camera is limited to the sector determined by the minimum and maximum values. Set to true by default.
Access functions:
| bool | wrapYRotation() const |
| void | setWrapYRotation(bool isEnabled) |
Notifier signal:
| void | wrapYRotationChanged(bool isEnabled) |
This property holds the X-rotation angle of the camera around the target point in degrees.
Access functions:
| float | xRotation() const |
| void | setXRotation(float rotation) |
Notifier signal:
| void | xRotationChanged(float rotation) |
This property holds the Y-rotation angle of the camera around the target point in degrees.
Access functions:
| float | yRotation() const |
| void | setYRotation(float rotation) |
Notifier signal:
| void | yRotationChanged(float rotation) |
This property holds the camera zoom level in percentage.
The default value of 100.0f means there is no zoom in or out set in the camera. The value is limited by the minZoomLevel and maxZoomLevel properties.
Access functions:
| float | zoomLevel() const |
| void | setZoomLevel(float zoomLevel) |
Notifier signal:
| void | zoomLevelChanged(float zoomLevel) |
See also minZoomLevel and maxZoomLevel.
Constructs a new 3D camera with position set to origin, up direction facing towards the Y-axis and looking at origin by default. An optional parent parameter can be given and is then passed to QObject constructor.
[virtual] Q3DCamera::~Q3DCamera()
Destroys the camera object.
[override virtual] void Q3DCamera::copyValuesFrom(const Q3DObject &source)
Reimplements: Q3DObject::copyValuesFrom(const Q3DObject &source).
Copies the 3D camera's properties from the given source camera. Values are copied from the source to this object.
Utility function that sets the camera rotations and distance.horizontal and vertical define the camera rotations to be used. Optional zoom parameter can be given to set the zoom percentage of the camera within the bounds defined by minZoomLevel and maxZoomLevel properties.
© The Qt Company Ltd
Licensed under the GNU Free Documentation License, Version 1.3.
https://doc.qt.io/qt-6.2/q3dcamera.html