OpenSSL IO buffering mix-in module.
This module allows an OpenSSL::SSL::SSLSocket to behave like an IO.
You typically won't use this module directly, you can see it implemented in OpenSSL::SSL::SSLSocket.
Default size to read from or write to the SSLSocket for buffer operations.
The “sync mode” of the SSLSocket.
See IO#sync for full details.
# File ext/openssl/lib/openssl/buffering.rb, line 40 def initialize(*) super @eof = false @rbuffer = "" @sync = @io.sync end
Creates an instance of OpenSSL's buffering IO module.
# File ext/openssl/lib/openssl/buffering.rb, line 390 def <<(s) do_write(s) self end
Writes s to the stream. s will be converted to a String using .to_s method.
# File ext/openssl/lib/openssl/buffering.rb, line 451 def close flush rescue nil sysclose end
Closes the SSLSocket and flushes any unwritten data.
# File ext/openssl/lib/openssl/buffering.rb, line 227
def each(eol=$/)
while line = self.gets(eol)
yield line
end
end Executes the block for every line in the stream where lines are separated by eol.
See also gets
# File ext/openssl/lib/openssl/buffering.rb, line 268
def each_byte # :yields: byte
while c = getc
yield(c.ord)
end
end Calls the given block once for each byte in the stream.
# File ext/openssl/lib/openssl/buffering.rb, line 299 def eof? fill_rbuff if !@eof && @rbuffer.empty? @eof && @rbuffer.empty? end
Returns true if the stream is at file which means there is no more data to be read.
# File ext/openssl/lib/openssl/buffering.rb, line 439 def flush osync = @sync @sync = true do_write "" return self ensure @sync = osync end
Flushes buffered data to the SSLSocket.
# File ext/openssl/lib/openssl/buffering.rb, line 261 def getc read(1) end
Reads one character from the stream. Returns nil if called at end of file.
# File ext/openssl/lib/openssl/buffering.rb, line 203
def gets(eol=$/, limit=nil)
idx = @rbuffer.index(eol)
until @eof
break if idx
fill_rbuff
idx = @rbuffer.index(eol)
end
if eol.is_a?(Regexp)
size = idx ? idx+$&.size : nil
else
size = idx ? idx+eol.size : nil
end
if size && limit && limit >= 0
size = [size, limit].min
end
consume_rbuff(size)
end Reads the next “line” from the stream. Lines are separated by eol. If limit is provided the result will not be longer than the given number of bytes.
eol may be a String or Regexp.
Unlike IO#gets the line read will not be assigned to +$_+.
Unlike IO#gets the separator must be provided if a limit is provided.
# File ext/openssl/lib/openssl/buffering.rb, line 418
def print(*args)
s = ""
args.each{ |arg| s << arg.to_s }
do_write(s)
nil
end Writes args to the stream.
See IO#print for full details.
# File ext/openssl/lib/openssl/buffering.rb, line 431 def printf(s, *args) do_write(s % args) nil end
Formats and writes to the stream converting parameters under control of the format string.
See Kernel#sprintf for format string details.
# File ext/openssl/lib/openssl/buffering.rb, line 400
def puts(*args)
s = ""
if args.empty?
s << "\n"
end
args.each{|arg|
s << arg.to_s
s.sub!(/(?<!\n)\z/, "\n")
}
do_write(s)
nil
end Writes args to the stream along with a record separator.
See IO#puts for full details.
# File ext/openssl/lib/openssl/buffering.rb, line 87
def read(size=nil, buf=nil)
if size == 0
if buf
buf.clear
return buf
else
return ""
end
end
until @eof
break if size && size <= @rbuffer.size
fill_rbuff
end
ret = consume_rbuff(size) || ""
if buf
buf.replace(ret)
ret = buf
end
(size && ret.empty?) ? nil : ret
end Reads size bytes from the stream. If buf is provided it must reference a string which will receive the data.
See IO#read for full details.
# File ext/openssl/lib/openssl/buffering.rb, line 172
def read_nonblock(maxlen, buf=nil, exception: true)
if maxlen == 0
if buf
buf.clear
return buf
else
return ""
end
end
if @rbuffer.empty?
return sysread_nonblock(maxlen, buf, exception: exception)
end
ret = consume_rbuff(maxlen)
if buf
buf.replace(ret)
ret = buf
end
ret
end Reads at most maxlen bytes in the non-blocking manner.
When no data can be read without blocking it raises OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
IO::WaitReadable means SSL needs to read internally so read_nonblock should be called again when the underlying IO is readable.
IO::WaitWritable means SSL needs to write internally so read_nonblock should be called again after the underlying IO is writable.
OpenSSL::Buffering#read_nonblock needs two rescue clause as follows:
# emulates blocking read (readpartial). begin result = ssl.read_nonblock(maxlen) rescue IO::WaitReadable IO.select([io]) retry rescue IO::WaitWritable IO.select(nil, [io]) retry end
Note that one reason that read_nonblock writes to the underlying IO is when the peer requests a new TLS/SSL handshake. See openssl the FAQ for more details. www.openssl.org/support/faq.html
By specifying a keyword argument exception to false, you can indicate that read_nonblock should not raise an IO::Wait*able exception, but return the symbol :wait_writable or :wait_readable instead. At EOF, it will return nil instead of raising EOFError.
# File ext/openssl/lib/openssl/buffering.rb, line 278 def readchar raise EOFError if eof? getc end
Reads a one-character string from the stream. Raises an EOFError at end of file.
# File ext/openssl/lib/openssl/buffering.rb, line 252 def readline(eol=$/) raise EOFError if eof? gets(eol) end
Reads a line from the stream which is separated by eol.
Raises EOFError if at end of file.
# File ext/openssl/lib/openssl/buffering.rb, line 239
def readlines(eol=$/)
ary = []
while line = self.gets(eol)
ary << line
end
ary
end Reads lines from the stream which are separated by eol.
See also gets
# File ext/openssl/lib/openssl/buffering.rb, line 114
def readpartial(maxlen, buf=nil)
if maxlen == 0
if buf
buf.clear
return buf
else
return ""
end
end
if @rbuffer.empty?
begin
return sysread(maxlen, buf)
rescue Errno::EAGAIN
retry
end
end
ret = consume_rbuff(maxlen)
if buf
buf.replace(ret)
ret = buf
end
ret
end Reads at most maxlen bytes from the stream. If buf is provided it must reference a string which will receive the data.
See IO#readpartial for full details.
# File ext/openssl/lib/openssl/buffering.rb, line 291 def ungetc(c) @rbuffer[0,0] = c.chr end
Pushes character c back onto the stream such that a subsequent buffered character read will return it.
Unlike IO#getc multiple bytes may be pushed back onto the stream.
Has no effect on unbuffered reads (such as sysread).
# File ext/openssl/lib/openssl/buffering.rb, line 337
def write(*s)
s.inject(0) do |written, str|
do_write(str)
written + str.bytesize
end
end Writes s to the stream. If the argument is not a String it will be converted using .to_s method. Returns the number of bytes written.
# File ext/openssl/lib/openssl/buffering.rb, line 381 def write_nonblock(s, exception: true) flush syswrite_nonblock(s, exception: exception) end
Writes s in the non-blocking manner.
If there is buffered data, it is flushed first. This may block.
write_nonblock returns number of bytes written to the SSL connection.
When no data can be written without blocking it raises OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
IO::WaitReadable means SSL needs to read internally so write_nonblock should be called again after the underlying IO is readable.
IO::WaitWritable means SSL needs to write internally so write_nonblock should be called again after underlying IO is writable.
So OpenSSL::Buffering#write_nonblock needs two rescue clause as follows.
# emulates blocking write. begin result = ssl.write_nonblock(str) rescue IO::WaitReadable IO.select([io]) retry rescue IO::WaitWritable IO.select(nil, [io]) retry end
Note that one reason that write_nonblock reads from the underlying IO is when the peer requests a new TLS/SSL handshake. See the openssl FAQ for more details. www.openssl.org/support/faq.html
By specifying a keyword argument exception to false, you can indicate that write_nonblock should not raise an IO::Wait*able exception, but return the symbol :wait_writable or :wait_readable instead.
# File ext/openssl/lib/openssl/buffering.rb, line 68
def consume_rbuff(size=nil)
if @rbuffer.empty?
nil
else
size = @rbuffer.size unless size
ret = @rbuffer[0, size]
@rbuffer[0, size] = ""
ret
end
end Consumes size bytes from the buffer
# File ext/openssl/lib/openssl/buffering.rb, line 314
def do_write(s)
@wbuffer = "" unless defined? @wbuffer
@wbuffer << s
@wbuffer.force_encoding(Encoding::BINARY)
@sync ||= false
if @sync or @wbuffer.size > BLOCK_SIZE
until @wbuffer.empty?
begin
nwrote = syswrite(@wbuffer)
rescue Errno::EAGAIN
retry
end
@wbuffer[0, nwrote] = ""
end
end
end Writes s to the buffer. When the buffer is full or sync is true the buffer is flushed to the underlying socket.
# File ext/openssl/lib/openssl/buffering.rb, line 55
def fill_rbuff
begin
@rbuffer << self.sysread(BLOCK_SIZE)
rescue Errno::EAGAIN
retry
rescue EOFError
@eof = true
end
end Fills the buffer from the underlying SSLSocket
Ruby Core © 1993–2017 Yukihiro Matsumoto
Licensed under the Ruby License.
Ruby Standard Library © contributors
Licensed under their own licenses.