# File ractor.rb, line 833
def self.main
__builtin_cexpr! %q{
rb_ractor_self(GET_VM()->ractor.main_ractor);
}
end Ractor is a Actor-model abstraction for Ruby that provides thread-safe parallel execution.
Ractor.new can make new Ractor and it will run in parallel.
# The simplest ractor
r = Ractor.new {puts "I am in Ractor!"}
r.take # wait it to finish
# here "I am in Ractor!" would be printed
Ractors do not share usual objects, so the some kind of thread-safety concerns such as data-race, race-conditions are not available on multi-ractor programming.
To achieve this, ractors severely limit object sharing between different ractors. For example, unlike threads, ractors can't access each other's objects, nor any objects through variables of the outer scope.
a = 1
r = Ractor.new {puts "I am in Ractor! a=#{a}"}
# fails immediately with
# ArgumentError (can not isolate a Proc because it accesses outer variables (a).)
On CRuby (the default implementation), Global Virtual Machine Lock (GVL) is held per ractor, so ractors are performed in parallel without locking each other.
Instead of accessing the shared state, the objects should be passed to and from ractors via sending and receiving objects as messages.
a = 1
r = Ractor.new do
a_in_ractor = receive # receive blocks till somebody will pass message
puts "I am in Ractor! a=#{a_in_ractor}"
end
r.send(a) # pass it
r.take
# here "I am in Ractor! a=1" would be printed
There are two pairs of methods for sending/receiving messages:
Ractor#send and Ractor.receive for when the sender knows the receiver (push);
Ractor.yield and Ractor#take for when the receiver knows the sender (pull);
In addition to that, an argument to Ractor.new would be passed to block and available there as if received by Ractor.receive, and the last block value would be sent outside of the ractor as if sent by Ractor.yield.
A little demonstration on a classic ping-pong:
server = Ractor.new do
puts "Server starts: #{self.inspect}"
puts "Server sends: ping"
Ractor.yield 'ping' # The server doesn't know the receiver and sends to whoever interested
received = Ractor.receive # The server doesn't know the sender and receives from whoever sent
puts "Server received: #{received}"
end
client = Ractor.new(server) do |srv| # The server is sent inside client, and available as srv
puts "Client starts: #{self.inspect}"
received = srv.take # The Client takes a message specifically from the server
puts "Client received from " \
"#{srv.inspect}: #{received}"
puts "Client sends to " \
"#{srv.inspect}: pong"
srv.send 'pong' # The client sends a message specifically to the server
end
[client, server].each(&:take) # Wait till they both finish
This will output:
Server starts: #<Ractor:#2 test.rb:1 running> Server sends: ping Client starts: #<Ractor:#3 test.rb:8 running> Client received from #<Ractor:#2 rac.rb:1 blocking>: ping Client sends to #<Ractor:#2 rac.rb:1 blocking>: pong Server received: pong
It is said that Ractor receives messages via the incoming port, and sends them to the outgoing port. Either one can be disabled with Ractor#close_incoming and Ractor#close_outgoing respectively. If a ractor terminated, its ports will be closed automatically.
When the object is sent to and from the ractor, it is important to understand whether the object is shareable or unshareable. Most of objects are unshareable objects.
Shareable objects are basically those which can be used by several threads without compromising thread-safety; e.g. immutable ones. Ractor.shareable? allows to check this, and Ractor.make_shareable tries to make object shareable if it is not.
Ractor.shareable?(1) #=> true -- numbers and other immutable basic values are
Ractor.shareable?('foo') #=> false, unless the string is frozen due to # freeze_string_literals: true
Ractor.shareable?('foo'.freeze) #=> true
ary = ['hello', 'world']
ary.frozen? #=> false
ary[0].frozen? #=> false
Ractor.make_shareable(ary)
ary.frozen? #=> true
ary[0].frozen? #=> true
ary[1].frozen? #=> true
When a shareable object is sent (via send or Ractor.yield), no additional processing happens, and it just becomes usable by both ractors. When an unshareable object is sent, it can be either copied or moved. The first is the default, and it makes the object's full copy by deep cloning of non-shareable parts of its structure.
data = ['foo', 'bar'.freeze]
r = Ractor.new do
data2 = Ractor.receive
puts "In ractor: #{data2.object_id}, #{data2[0].object_id}, #{data2[1].object_id}"
end
r.send(data)
r.take
puts "Outside : #{data.object_id}, #{data[0].object_id}, #{data[1].object_id}"
This will output:
In ractor: 340, 360, 320 Outside : 380, 400, 320
(Note that object id of both array and non-frozen string inside array have changed inside the ractor, showing it is different objects. But the second array's element, which is a shareable frozen string, has the same object_id.)
Deep cloning of the objects may be slow, and sometimes impossible. Alternatively, move: true may be used on sending. This will move the object to the receiving ractor, making it inaccessible for a sending ractor.
data = ['foo', 'bar']
r = Ractor.new do
data_in_ractor = Ractor.receive
puts "In ractor: #{data_in_ractor.object_id}, #{data_in_ractor[0].object_id}"
end
r.send(data, move: true)
r.take
puts "Outside: moved? #{Ractor::MovedObject === data}"
puts "Outside: #{data.inspect}"
This will output:
In ractor: 100, 120 Outside: moved? true test.rb:9:in `method_missing': can not send any methods to a moved object (Ractor::MovedError)
Notice that even inspect (and more basic methods like __id__) is inaccessible on a moved object.
Besides frozen objects, there are shareable objects. Class and Module objects are shareable so the Class/Module definitons are shared between ractors. Ractor objects are also shareable objects. All operations for the shareable mutable objects are thread-safe, so the thread-safety property will be kept. We can not define mutable shareable objects in Ruby, but C extensions can introduce them.
It is prohibited to access instance variables of mutable shareable objects (especially Modules and classes) from ractors other than main:
class C
class << self
attr_accessor :tricky
end
end
C.tricky = 'test'
r = Ractor.new(C) do |cls|
puts "I see #{cls}"
puts "I can't see #{cls.tricky}"
end
r.take
# I see C
# can not access instance variables of classes/modules from non-main Ractors (RuntimeError)
Ractors can access constants if they are shareable. The main Ractor is the only one that can access non-shareable constants.
GOOD = 'good'.freeze
BAD = 'bad'
r = Ractor.new do
puts "GOOD=#{GOOD}"
puts "BAD=#{BAD}"
end
r.take
# GOOD=good
# can not access non-shareable objects in constant Object::BAD by non-main Ractor. (NameError)
# Consider the same C class from above
r = Ractor.new do
puts "I see #{C}"
puts "I can't see #{C.tricky}"
end
r.take
# I see C
# can not access instance variables of classes/modules from non-main Ractors (RuntimeError)
See also the description of # shareable_constant_value pragma in Comments syntax explanation.
Each ractor creates its own thread. New threads can be created from inside ractor (and, on CRuby, sharing GVL with other threads of this ractor).
r = Ractor.new do
a = 1
Thread.new {puts "Thread in ractor: a=#{a}"}.join
end
r.take
# Here "Thread in ractor: a=1" will be printed
In examples below, sometimes we use the following method to wait till ractors that are not currently blocked will finish (or process till next blocking) method.
def wait sleep(0.1) end
It is **only for demonstration purposes** and shouldn't be used in a real code. Most of the times, just take is used to wait till ractor will finish.
See Ractor desgin doc for more details.
# File ractor.rb, line 287
def self.count
__builtin_cexpr! %q{
ULONG2NUM(GET_VM()->ractor.cnt);
}
end Returns total count of Ractors currently running.
Ractor.count #=> 1
r = Ractor.new(name: 'example') { Ractor.yield(1) }
Ractor.count #=> 2 (main + example ractor)
r.take # wait for Ractor.yield(1)
r.take # wait till r will finish
Ractor.count #=> 1
# File ractor.rb, line 273
def self.current
__builtin_cexpr! %q{
rb_ractor_self(rb_ec_ractor_ptr(ec));
}
end Returns the currently executing Ractor.
Ractor.current #=> #<Ractor:#1 running>
# File ractor.rb, line 833
def self.main
__builtin_cexpr! %q{
rb_ractor_self(GET_VM()->ractor.main_ractor);
}
end returns main ractor
Make obj shareable between ractors.
obj and all the objects it refers to will be frozen, unless they are already shareable.
If copy keyword is true, the method will copy objects before freezing them This is safer option but it can take be slower.
Note that the specification and implementation of this method are not mature and may be changed in the future.
obj = ['test'] Ractor.shareable?(obj) #=> false Ractor.make_shareable(obj) #=> ["test"] Ractor.shareable?(obj) #=> true obj.frozen? #=> true obj[0].frozen? #=> true # Copy vs non-copy versions: obj1 = ['test'] obj1s = Ractor.make_shareable(obj1) obj1.frozen? #=> true obj1s.object_id == obj1.object_id #=> true obj2 = ['test'] obj2s = Ractor.make_shareable(obj2, copy: true) obj2.frozen? #=> false obj2s.frozen? #=> true obj2s.object_id == obj2.object_id #=> false obj2s[0].object_id == obj2[0].object_id #=> false
See also the “Shareable and unshareable objects” section in the Ractor class docs.
# File ractor.rb, line 262
def self.new(*args, name: nil, &block)
b = block # TODO: builtin bug
raise ArgumentError, "must be called with a block" unless block
loc = caller_locations(1, 1).first
loc = "#{loc.path}:#{loc.lineno}"
__builtin_ractor_create(loc, name, args, b)
end Create a new Ractor with args and a block.
A block (Proc) will be isolated (can't access to outer variables). self inside the block will refer to the current Ractor.
r = Ractor.new { puts "Hi, I am #{self.inspect}" }
r.take
# Prints "Hi, I am #<Ractor:#2 test.rb:1 running>"
args passed to the method would be propagated to block args by the same rules as objects passed through send/Ractor.receive: if args are not shareable, they will be copied (via deep cloning, which might be inefficient).
arg = [1, 2, 3]
puts "Passing: #{arg} (##{arg.object_id})"
r = Ractor.new(arg) {|received_arg|
puts "Received: #{received_arg} (##{received_arg.object_id})"
}
r.take
# Prints:
# Passing: [1, 2, 3] (#280)
# Received: [1, 2, 3] (#300)
Ractor's name can be set for debugging purposes:
r = Ractor.new(name: 'my ractor') {}
p r
#=> #<Ractor:#3 my ractor test.rb:1 terminated>
# File ractor.rb, line 415
def self.receive
__builtin_cexpr! %q{
ractor_receive(ec, rb_ec_ractor_ptr(ec))
}
end Receive an incoming message from the current Ractor's incoming port's queue, which was sent there by send.
r = Ractor.new do
v1 = Ractor.receive
puts "Received: #{v1}"
end
r.send('message1')
r.take
# Here will be printed: "Received: message1"
Alternatively, private instance method receive may be used:
r = Ractor.new do
v1 = receive
puts "Received: #{v1}"
end
r.send('message1')
r.take
# Here will be printed: "Received: message1"
The method blocks if the queue is empty.
r = Ractor.new do
puts "Before first receive"
v1 = Ractor.receive
puts "Received: #{v1}"
v2 = Ractor.receive
puts "Received: #{v2}"
end
wait
puts "Still not received"
r.send('message1')
wait
puts "Still received only one"
r.send('message2')
r.take
Output:
Before first receive Still not received Received: message1 Still received only one Received: message2
If close_incoming was called on the ractor, the method raises Ractor::ClosedError if there are no more messages in incoming queue:
Ractor.new do close_incoming receive end wait # in `receive': The incoming port is already closed => #<Ractor:#2 test.rb:1 running> (Ractor::ClosedError)
# File ractor.rb, line 493 def self.receive_if &b Primitive.ractor_receive_if b end
Receive only a specific message.
Instead of Ractor.receive, Ractor.receive_if can provide a pattern by a block and you can choose the receiving message.
r = Ractor.new do
p Ractor.receive_if{|msg| msg.match?(/foo/)} #=> "foo3"
p Ractor.receive_if{|msg| msg.match?(/bar/)} #=> "bar1"
p Ractor.receive_if{|msg| msg.match?(/baz/)} #=> "baz2"
end
r << "bar1"
r << "baz2"
r << "foo3"
r.take
This will output:
foo3 bar1 baz2
If the block returns a truthy value, the message will be removed from the incoming queue and returned. Otherwise, the messsage remains in the incoming queue and the following received messages are checked by the given block.
If there are no messages left in the incoming queue, the method will block until new messages arrive.
If the block is escaped by break/return/exception/throw, the message is removed from the incoming queue as if a truthy value had been returned.
r = Ractor.new do
val = Ractor.receive_if{|msg| msg.is_a?(Array)}
puts "Received successfully: #{val}"
end
r.send(1)
r.send('test')
wait
puts "2 non-matching sent, nothing received"
r.send([1, 2, 3])
wait
Prints:
2 non-matching sent, nothing received Received successfully: [1, 2, 3]
Note that you can not call receive/receive_if in the given block recursively. It means that you should not do any tasks in the block.
Ractor.current << true
Ractor.receive_if{|msg| Ractor.receive}
#=> `receive': can not call receive/receive_if recursively (Ractor::Error)
# File ractor.rb, line 342
def self.select(*ractors, yield_value: yield_unspecified = true, move: false)
raise ArgumentError, 'specify at least one ractor or `yield_value`' if yield_unspecified && ractors.empty?
__builtin_cstmt! %q{
const VALUE *rs = RARRAY_CONST_PTR_TRANSIENT(ractors);
VALUE rv;
VALUE v = ractor_select(ec, rs, RARRAY_LENINT(ractors),
yield_unspecified == Qtrue ? Qundef : yield_value,
(bool)RTEST(move) ? true : false, &rv);
return rb_ary_new_from_args(2, rv, v);
}
end Waits for the first ractor to have something in its outgoing port, reads from this ractor, and returns that ractor and the object received.
r1 = Ractor.new {Ractor.yield 'from 1'}
r2 = Ractor.new {Ractor.yield 'from 2'}
r, obj = Ractor.select(r1, r2)
puts "received #{obj.inspect} from #{r.inspect}"
# Prints: received "from 1" from #<Ractor:#2 test.rb:1 running>
If one of the given ractors is the current ractor, and it would be selected, r will contain :receive symbol instead of the ractor object.
r1 = Ractor.new(Ractor.current) do |main|
main.send 'to main'
Ractor.yield 'from 1'
end
r2 = Ractor.new do
Ractor.yield 'from 2'
end
r, obj = Ractor.select(r1, r2, Ractor.current)
puts "received #{obj.inspect} from #{r.inspect}"
# Prints: received "to main" from :receive
If yield_value is provided, that value may be yielded if another Ractor is calling take. In this case, the pair [:yield, nil] would be returned:
r1 = Ractor.new(Ractor.current) do |main|
puts "Received from main: #{main.take}"
end
puts "Trying to select"
r, obj = Ractor.select(r1, Ractor.current, yield_value: 123)
wait
puts "Received #{obj.inspect} from #{r.inspect}"
This will print:
Trying to select Received from main: 123 Received nil from :yield
move boolean flag defines whether yielded value should be copied (default) or moved.
Checks if the object is shareable by ractors.
Ractor.shareable?(1) #=> true -- numbers and other immutable basic values are frozen
Ractor.shareable?('foo') #=> false, unless the string is frozen due to # freeze_string_literals: true
Ractor.shareable?('foo'.freeze) #=> true
See also the “Shareable and unshareable objects” section in the Ractor class docs.
# File ractor.rb, line 626
def self.yield(obj, move: false)
__builtin_cexpr! %q{
ractor_yield(ec, rb_ec_ractor_ptr(ec), obj, move)
}
end Send a message to the current ractor's outgoing port to be consumed by take.
r = Ractor.new {Ractor.yield 'Hello from ractor'}
puts r.take
# Prints: "Hello from ractor"
The method is blocking, and will return only when somebody consumes the sent message.
r = Ractor.new do Ractor.yield 'Hello from ractor' puts "Ractor: after yield" end wait puts "Still not taken" puts r.take
This will print:
Still not taken Hello from ractor Ractor: after yield
If the outgoing port was closed with close_outgoing, the method will raise:
r = Ractor.new do close_outgoing Ractor.yield 'Hello from ractor' end wait # `yield': The outgoing-port is already closed (Ractor::ClosedError)
The meaning of move argument is the same as for send.
# File ractor.rb, line 823 def [](sym) Primitive.ractor_local_value(sym) end
get a value from ractor-local storage
# File ractor.rb, line 828 def []=(sym, val) Primitive.ractor_local_value_set(sym, val) end
set a value in ractor-local storage
# File ractor.rb, line 733
def close_incoming
__builtin_cexpr! %q{
ractor_close_incoming(ec, RACTOR_PTR(self));
}
end Closes the incoming port and returns its previous state. All further attempts to Ractor.receive in the ractor, and send to the ractor will fail with Ractor::ClosedError.
r = Ractor.new {sleep(500)}
r.close_incoming #=> false
r.close_incoming #=> true
r.send('test')
# Ractor::ClosedError (The incoming-port is already closed)
# File ractor.rb, line 752
def close_outgoing
__builtin_cexpr! %q{
ractor_close_outgoing(ec, RACTOR_PTR(self));
}
end Closes the outgoing port and returns its previous state. All further attempts to Ractor.yield in the ractor, and take from the ractor will fail with Ractor::ClosedError.
r = Ractor.new {sleep(500)}
r.close_outgoing #=> false
r.close_outgoing #=> true
r.take
# Ractor::ClosedError (The outgoing-port is already closed)
# File ractor.rb, line 699
def inspect
loc = __builtin_cexpr! %q{ RACTOR_PTR(self)->loc }
name = __builtin_cexpr! %q{ RACTOR_PTR(self)->name }
id = __builtin_cexpr! %q{ INT2FIX(rb_ractor_id(RACTOR_PTR(self))) }
status = __builtin_cexpr! %q{
rb_str_new2(ractor_status_str(RACTOR_PTR(self)->status_))
}
"#<Ractor:##{id}#{name ? ' '+name : ''}#{loc ? " " + loc : ''} #{status}>"
end # File ractor.rb, line 712
def name
__builtin_cexpr! %q{RACTOR_PTR(self)->name}
end The name set in Ractor.new, or nil.
# File ractor.rb, line 582
def send(obj, move: false)
__builtin_cexpr! %q{
ractor_send(ec, RACTOR_PTR(self), obj, move)
}
end Send a message to a Ractor's incoming queue to be consumed by Ractor.receive.
r = Ractor.new do
value = Ractor.receive
puts "Received #{value}"
end
r.send 'message'
# Prints: "Received: message"
The method is non-blocking (will return immediately even if the ractor is not ready to receive anything):
r = Ractor.new {sleep(5)}
r.send('test')
puts "Sent successfully"
# Prints: "Sent successfully" immediately
Attempt to send to ractor which already finished its execution will raise Ractor::ClosedError.
r = Ractor.new {}
r.take
p r
# "#<Ractor:#6 (irb):23 terminated>"
r.send('test')
# Ractor::ClosedError (The incoming-port is already closed)
If close_incoming was called on the ractor, the method also raises Ractor::ClosedError.
r = Ractor.new do
sleep(500)
receive
end
r.close_incoming
r.send('test')
# Ractor::ClosedError (The incoming-port is already closed)
# The error would be raised immediately, not when ractor will try to receive
If the obj is unshareable, by default it would be copied into ractor by deep cloning. If the move: true is passed, object is moved into ractor and becomes inaccessible to sender.
r = Ractor.new {puts "Received: #{receive}"}
msg = 'message'
r.send(msg, move: true)
r.take
p msg
This prints:
Received: message in `p': undefined method `inspect' for #<Ractor::MovedObject:0x000055c99b9b69b8>
All references to the object and its parts will become invalid in sender.
r = Ractor.new {puts "Received: #{receive}"}
s = 'message'
ary = [s]
copy = ary.dup
r.send(ary, move: true)
s.inspect
# Ractor::MovedError (can not send any methods to a moved object)
ary.class
# Ractor::MovedError (can not send any methods to a moved object)
copy.class
# => Array, it is different object
copy[0].inspect
# Ractor::MovedError (can not send any methods to a moved object)
# ...but its item was still a reference to `s`, which was moved
If the object was shareable, move: true has no effect on it:
r = Ractor.new {puts "Received: #{receive}"}
s = 'message'.freeze
r.send(s, move: true)
s.inspect #=> "message", still available
# File ractor.rb, line 693
def take
__builtin_cexpr! %q{
ractor_take(ec, RACTOR_PTR(self))
}
end Take a message from ractor's outgoing port, which was put there by Ractor.yield or at ractor's finalization.
r = Ractor.new do Ractor.yield 'explicit yield' 'last value' end puts r.take #=> 'explicit yield' puts r.take #=> 'last value' puts r.take # Ractor::ClosedError (The outgoing-port is already closed)
The fact that the last value is also put to outgoing port means that take can be used as some analog of Thread#join (“just wait till ractor finishes”), but don't forget it will raise if somebody had already consumed everything ractor have produced.
If the outgoing port was closed with close_outgoing, the method will raise Ractor::ClosedError.
r = Ractor.new do sleep(500) Ractor.yield 'Hello from ractor' end r.close_outgoing r.take # Ractor::ClosedError (The outgoing-port is already closed) # The error would be raised immediately, not when ractor will try to receive
If an uncaught exception is raised in the Ractor, it is propagated on take as a Ractor::RemoteError.
r = Ractor.new {raise "Something weird happened"}
begin
r.take
rescue => e
p e # => #<Ractor::RemoteError: thrown by remote Ractor.>
p e.ractor == r # => true
p e.cause # => #<RuntimeError: Something weird happened>
end
Ractor::ClosedError is a descendant of StopIteration, so the closing of the ractor will break the loops without propagating the error:
r = Ractor.new do
3.times {|i| Ractor.yield "message #{i}"}
"finishing"
end
loop {puts "Received: " + r.take}
puts "Continue successfully"
This will print:
Received: message 0 Received: message 1 Received: message 2 Received: finishing Continue successfully
# File ractor.rb, line 426
def receive
__builtin_cexpr! %q{
ractor_receive(ec, rb_ec_ractor_ptr(ec))
}
end same as Ractor.receive
# File ractor.rb, line 497
def receive_if &b
Primitive.ractor_receive_if b
end
Ruby Core © 1993–2020 Yukihiro Matsumoto
Licensed under the Ruby License.
Ruby Standard Library © contributors
Licensed under their own licenses.