#[repr(C, align(8))]pub struct AtomicI64 { /* fields omitted */ }
An integer type which can be safely shared between threads.
This type has the same in-memory representation as the underlying integer type, i64. For more about the differences between atomic types and non-atomic types as well as information about the portability of this type, please see the module-level documentation.
Note: This type is only available on platforms that support atomic loads and stores of i64.
impl AtomicI64[src]
pub const fn new(v: i64) -> AtomicI64[src]
Creates a new atomic integer.
use std::sync::atomic::AtomicI64; let atomic_forty_two = AtomicI64::new(42);
pub fn get_mut(&mut self) -> &mut i64[src]
Returns a mutable reference to the underlying integer.
This is safe because the mutable reference guarantees that no other threads are concurrently accessing the atomic data.
use std::sync::atomic::{AtomicI64, Ordering};
let mut some_var = AtomicI64::new(10);
assert_eq!(*some_var.get_mut(), 10);
*some_var.get_mut() = 5;
assert_eq!(some_var.load(Ordering::SeqCst), 5);pub fn into_inner(self) -> i64[src]
Consumes the atomic and returns the contained value.
This is safe because passing self by value guarantees that no other threads are concurrently accessing the atomic data.
use std::sync::atomic::AtomicI64; let some_var = AtomicI64::new(5); assert_eq!(some_var.into_inner(), 5);
pub fn load(&self, order: Ordering) -> i64[src]
Loads a value from the atomic integer.
load takes an Ordering argument which describes the memory ordering of this operation. Possible values are SeqCst, Acquire and Relaxed.
Panics if order is Release or AcqRel.
use std::sync::atomic::{AtomicI64, Ordering};
let some_var = AtomicI64::new(5);
assert_eq!(some_var.load(Ordering::Relaxed), 5);pub fn store(&self, val: i64, order: Ordering)[src]
Stores a value into the atomic integer.
store takes an Ordering argument which describes the memory ordering of this operation. Possible values are SeqCst, Release and Relaxed.
Panics if order is Acquire or AcqRel.
use std::sync::atomic::{AtomicI64, Ordering};
let some_var = AtomicI64::new(5);
some_var.store(10, Ordering::Relaxed);
assert_eq!(some_var.load(Ordering::Relaxed), 10);pub fn swap(&self, val: i64, order: Ordering) -> i64[src]
Stores a value into the atomic integer, returning the previous value.
swap takes an Ordering argument which describes the memory ordering of this operation. All ordering modes are possible. Note that using Acquire makes the store part of this operation Relaxed, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let some_var = AtomicI64::new(5);
assert_eq!(some_var.swap(10, Ordering::Relaxed), 5);pub fn compare_and_swap(&self, current: i64, new: i64, order: Ordering) -> i64[src]
Stores a value into the atomic integer if the current value is the same as the current value.
The return value is always the previous value. If it is equal to current, then the value was updated.
compare_and_swap also takes an Ordering argument which describes the memory ordering of this operation. Notice that even when using AcqRel, the operation might fail and hence just perform an Acquire load, but not have Release semantics. Using Acquire makes the store part of this operation Relaxed if it happens, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let some_var = AtomicI64::new(5);
assert_eq!(some_var.compare_and_swap(5, 10, Ordering::Relaxed), 5);
assert_eq!(some_var.load(Ordering::Relaxed), 10);
assert_eq!(some_var.compare_and_swap(6, 12, Ordering::Relaxed), 10);
assert_eq!(some_var.load(Ordering::Relaxed), 10);pub fn compare_exchange(
&self,
current: i64,
new: i64,
success: Ordering,
failure: Ordering
) -> Result<i64, i64>[src]
Stores a value into the atomic integer if the current value is the same as the current value.
The return value is a result indicating whether the new value was written and containing the previous value. On success this value is guaranteed to be equal to current.
compare_exchange takes two Ordering arguments to describe the memory ordering of this operation. The first describes the required ordering if the operation succeeds while the second describes the required ordering when the operation fails. Using Acquire as success ordering makes the store part of this operation Relaxed, and using Release makes the successful load Relaxed. The failure ordering can only be SeqCst, Acquire or Relaxed and must be equivalent to or weaker than the success ordering.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let some_var = AtomicI64::new(5);
assert_eq!(some_var.compare_exchange(5, 10,
Ordering::Acquire,
Ordering::Relaxed),
Ok(5));
assert_eq!(some_var.load(Ordering::Relaxed), 10);
assert_eq!(some_var.compare_exchange(6, 12,
Ordering::SeqCst,
Ordering::Acquire),
Err(10));
assert_eq!(some_var.load(Ordering::Relaxed), 10);pub fn compare_exchange_weak(
&self,
current: i64,
new: i64,
success: Ordering,
failure: Ordering
) -> Result<i64, i64>[src]
Stores a value into the atomic integer if the current value is the same as the current value.
Unlike compare_exchange, this function is allowed to spuriously fail even when the comparison succeeds, which can result in more efficient code on some platforms. The return value is a result indicating whether the new value was written and containing the previous value.
compare_exchange_weak takes two Ordering arguments to describe the memory ordering of this operation. The first describes the required ordering if the operation succeeds while the second describes the required ordering when the operation fails. Using Acquire as success ordering makes the store part of this operation Relaxed, and using Release makes the successful load Relaxed. The failure ordering can only be SeqCst, Acquire or Relaxed and must be equivalent to or weaker than the success ordering.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let val = AtomicI64::new(4);
let mut old = val.load(Ordering::Relaxed);
loop {
let new = old * 2;
match val.compare_exchange_weak(old, new, Ordering::SeqCst, Ordering::Relaxed) {
Ok(_) => break,
Err(x) => old = x,
}
}pub fn fetch_add(&self, val: i64, order: Ordering) -> i64[src]
Adds to the current value, returning the previous value.
This operation wraps around on overflow.
fetch_add takes an Ordering argument which describes the memory ordering of this operation. All ordering modes are possible. Note that using Acquire makes the store part of this operation Relaxed, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(0);
assert_eq!(foo.fetch_add(10, Ordering::SeqCst), 0);
assert_eq!(foo.load(Ordering::SeqCst), 10);pub fn fetch_sub(&self, val: i64, order: Ordering) -> i64[src]
Subtracts from the current value, returning the previous value.
This operation wraps around on overflow.
fetch_sub takes an Ordering argument which describes the memory ordering of this operation. All ordering modes are possible. Note that using Acquire makes the store part of this operation Relaxed, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(20);
assert_eq!(foo.fetch_sub(10, Ordering::SeqCst), 20);
assert_eq!(foo.load(Ordering::SeqCst), 10);pub fn fetch_and(&self, val: i64, order: Ordering) -> i64[src]
Bitwise "and" with the current value.
Performs a bitwise "and" operation on the current value and the argument val, and sets the new value to the result.
Returns the previous value.
fetch_and takes an Ordering argument which describes the memory ordering of this operation. All ordering modes are possible. Note that using Acquire makes the store part of this operation Relaxed, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(0b101101);
assert_eq!(foo.fetch_and(0b110011, Ordering::SeqCst), 0b101101);
assert_eq!(foo.load(Ordering::SeqCst), 0b100001);pub fn fetch_nand(&self, val: i64, order: Ordering) -> i64[src]
Bitwise "nand" with the current value.
Performs a bitwise "nand" operation on the current value and the argument val, and sets the new value to the result.
Returns the previous value.
fetch_nand takes an Ordering argument which describes the memory ordering of this operation. All ordering modes are possible. Note that using Acquire makes the store part of this operation Relaxed, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(0x13);
assert_eq!(foo.fetch_nand(0x31, Ordering::SeqCst), 0x13);
assert_eq!(foo.load(Ordering::SeqCst), !(0x13 & 0x31));pub fn fetch_or(&self, val: i64, order: Ordering) -> i64[src]
Bitwise "or" with the current value.
Performs a bitwise "or" operation on the current value and the argument val, and sets the new value to the result.
Returns the previous value.
fetch_or takes an Ordering argument which describes the memory ordering of this operation. All ordering modes are possible. Note that using Acquire makes the store part of this operation Relaxed, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(0b101101);
assert_eq!(foo.fetch_or(0b110011, Ordering::SeqCst), 0b101101);
assert_eq!(foo.load(Ordering::SeqCst), 0b111111);pub fn fetch_xor(&self, val: i64, order: Ordering) -> i64[src]
Bitwise "xor" with the current value.
Performs a bitwise "xor" operation on the current value and the argument val, and sets the new value to the result.
Returns the previous value.
fetch_xor takes an Ordering argument which describes the memory ordering of this operation. All ordering modes are possible. Note that using Acquire makes the store part of this operation Relaxed, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(0b101101);
assert_eq!(foo.fetch_xor(0b110011, Ordering::SeqCst), 0b101101);
assert_eq!(foo.load(Ordering::SeqCst), 0b011110);pub fn fetch_update<F>(
&self,
set_order: Ordering,
fetch_order: Ordering,
f: F
) -> Result<i64, i64> where
F: FnMut(i64) -> Option<i64>, [src]1.45.0
Fetches the value, and applies a function to it that returns an optional new value. Returns a Result of Ok(previous_value) if the function returned Some(_), else Err(previous_value).
Note: This may call the function multiple times if the value has been changed from other threads in the meantime, as long as the function returns Some(_), but the function will have been applied only once to the stored value.
fetch_update takes two Ordering arguments to describe the memory ordering of this operation. The first describes the required ordering for when the operation finally succeeds while the second describes the required ordering for loads. These correspond to the success and failure orderings of compare_exchange respectively.
Using Acquire as success ordering makes the store part of this operation Relaxed, and using Release makes the final successful load Relaxed. The (failed) load ordering can only be SeqCst, Acquire or Relaxed and must be equivalent to or weaker than the success ordering.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let x = AtomicI64::new(7);
assert_eq!(x.fetch_update(Ordering::SeqCst, Ordering::SeqCst, |_| None), Err(7));
assert_eq!(x.fetch_update(Ordering::SeqCst, Ordering::SeqCst, |x| Some(x + 1)), Ok(7));
assert_eq!(x.fetch_update(Ordering::SeqCst, Ordering::SeqCst, |x| Some(x + 1)), Ok(8));
assert_eq!(x.load(Ordering::SeqCst), 9);pub fn fetch_max(&self, val: i64, order: Ordering) -> i64[src]1.45.0
Maximum with the current value.
Finds the maximum of the current value and the argument val, and sets the new value to the result.
Returns the previous value.
fetch_max takes an Ordering argument which describes the memory ordering of this operation. All ordering modes are possible. Note that using Acquire makes the store part of this operation Relaxed, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(23);
assert_eq!(foo.fetch_max(42, Ordering::SeqCst), 23);
assert_eq!(foo.load(Ordering::SeqCst), 42);If you want to obtain the maximum value in one step, you can use the following:
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(23);
let bar = 42;
let max_foo = foo.fetch_max(bar, Ordering::SeqCst).max(bar);
assert!(max_foo == 42);pub fn fetch_min(&self, val: i64, order: Ordering) -> i64[src]1.45.0
Minimum with the current value.
Finds the minimum of the current value and the argument val, and sets the new value to the result.
Returns the previous value.
fetch_min takes an Ordering argument which describes the memory ordering of this operation. All ordering modes are possible. Note that using Acquire makes the store part of this operation Relaxed, and using Release makes the load part Relaxed.
Note: This method is only available on platforms that support atomic operations on i64.
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(23);
assert_eq!(foo.fetch_min(42, Ordering::Relaxed), 23);
assert_eq!(foo.load(Ordering::Relaxed), 23);
assert_eq!(foo.fetch_min(22, Ordering::Relaxed), 23);
assert_eq!(foo.load(Ordering::Relaxed), 22);If you want to obtain the minimum value in one step, you can use the following:
use std::sync::atomic::{AtomicI64, Ordering};
let foo = AtomicI64::new(23);
let bar = 12;
let min_foo = foo.fetch_min(bar, Ordering::SeqCst).min(bar);
assert_eq!(min_foo, 12);pub fn as_mut_ptr(&self) -> *mut i64[src]
Returns a mutable pointer to the underlying integer.
Doing non-atomic reads and writes on the resulting integer can be a data race. This method is mostly useful for FFI, where the function signature may use *mut i64 instead of &AtomicI64.
Returning an *mut pointer from a shared reference to this atomic is safe because the atomic types work with interior mutability. All modifications of an atomic change the value through a shared reference, and can do so safely as long as they use atomic operations. Any use of the returned raw pointer requires an unsafe block and still has to uphold the same restriction: operations on it must be atomic.
use std::sync::atomic::AtomicI64;
extern {
fn my_atomic_op(arg: *mut i64);
}
let mut atomic = AtomicI64::new(1);
unsafe {
my_atomic_op(atomic.as_mut_ptr());
}impl Debug for AtomicI64[src]
impl Default for AtomicI64[src]
impl From<i64> for AtomicI64[src]
impl RefUnwindSafe for AtomicI64[src]
impl Sync for AtomicI64[src]
impl<T> Any for T where
T: 'static + ?Sized, [src]
impl<T> Borrow<T> for T where
T: ?Sized, [src]
fn borrow(&self) -> &TⓘNotable traits for &'_ mut F
impl<'_, F> Future for &'_ mut F where
F: Unpin + Future + ?Sized,
type Output = <F as Future>::Output;
impl<'_, I> Iterator for &'_ mut I where
I: Iterator + ?Sized,
type Item = <I as Iterator>::Item;
impl<R: Read + ?Sized, '_> Read for &'_ mut R
impl<W: Write + ?Sized, '_> Write for &'_ mut W
[src]
impl<T> BorrowMut<T> for T where
T: ?Sized, [src]
fn borrow_mut(&mut self) -> &mut TⓘNotable traits for &'_ mut F
impl<'_, F> Future for &'_ mut F where
F: Unpin + Future + ?Sized,
type Output = <F as Future>::Output;
impl<'_, I> Iterator for &'_ mut I where
I: Iterator + ?Sized,
type Item = <I as Iterator>::Item;
impl<R: Read + ?Sized, '_> Read for &'_ mut R
impl<W: Write + ?Sized, '_> Write for &'_ mut W
[src]
impl<T> From<T> for T[src]
impl<T, U> Into<U> for T where
U: From<T>, [src]
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src]
type Error = InfallibleThe type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src]
© 2010 The Rust Project Developers
Licensed under the Apache License, Version 2.0 or the MIT license, at your option.
https://doc.rust-lang.org/std/sync/atomic/struct.AtomicI64.html