Manipulating and solving sparse problems involves various modules which are summarized below:

#include <Eigen/SparseCore>

#include <Eigen/SparseCholesky>

#include<Eigen/SparseLU> 

#include<Eigen/SparseQR>

#include <Eigen/IterativeLinearSolvers>

#include <Eigen/Sparse>

Sparse matrix format

In many applications (e.g., finite element methods) it is common to deal with very large matrices where only a few coefficients are different from zero. In such cases, memory consumption can be reduced and performance increased by using a specialized representation storing only the nonzero coefficients. Such a matrix is called a sparse matrix.

The SparseMatrix class

The class SparseMatrix is the main sparse matrix representation of Eigen's sparse module; it offers high performance and low memory usage. It implements a more versatile variant of the widely-used Compressed Column (or Row) Storage scheme. It consists of four compact arrays:

• Values: stores the coefficient values of the non-zeros.
• InnerIndices: stores the row (resp. column) indices of the non-zeros.
• OuterStarts: stores for each column (resp. row) the index of the first non-zero in the previous two arrays.
• InnerNNZs: stores the number of non-zeros of each column (resp. row). The word inner refers to an inner vector that is a column for a column-major matrix, or a row for a row-major matrix. The word outer refers to the other direction.

This storage scheme is better explained on an example. The following matrix

and one of its possible sparse, column major representation:

Currently the elements of a given inner vector are guaranteed to be always sorted by increasing inner indices. The "_" indicates available free space to quickly insert new elements. Assuming no reallocation is needed, the insertion of a random element is therefore in O(nnz_j) where nnz_j is the number of nonzeros of the respective inner vector. On the other hand, inserting elements with increasing inner indices in a given inner vector is much more efficient since this only requires to increase the respective InnerNNZs entry that is a O(1) operation.

The case where no empty space is available is a special case, and is referred as the compressed mode. It corresponds to the widely used Compressed Column (or Row) Storage schemes (CCS or CRS). Any SparseMatrix can be turned to this form by calling the SparseMatrix::makeCompressed() function. In this case, one can remark that the InnerNNZs array is redundant with OuterStarts because we have the equality: InnerNNZs[j] = OuterStarts[j+1]-OuterStarts[j]. Therefore, in practice a call to SparseMatrix::makeCompressed() frees this buffer.

It is worth noting that most of our wrappers to external libraries requires compressed matrices as inputs.

The results of Eigen's operations always produces compressed sparse matrices. On the other hand, the insertion of a new element into a SparseMatrix converts this later to the uncompressed mode.

Here is the previous matrix represented in compressed mode:

A SparseVector is a special case of a SparseMatrix where only the Values and InnerIndices arrays are stored. There is no notion of compressed/uncompressed mode for a SparseVector.

First example

Before describing each individual class, let's start with the following typical example: solving the Laplace equation \( \Delta u = 0 \) on a regular 2D grid using a finite difference scheme and Dirichlet boundary conditions. Such problem can be mathematically expressed as a linear problem of the form \( Ax=b \) where \( x \) is the vector of m unknowns (in our case, the values of the pixels), \( b \) is the right hand side vector resulting from the boundary conditions, and \( A \) is an \( m \times m \) matrix containing only a few non-zero elements resulting from the discretization of the Laplacian operator.

#include <Eigen/Sparse> #include <vector> #include <iostream> typedef Eigen::SparseMatrix<double> SpMat; // declares a column-major sparse matrix type of double typedef Eigen::Triplet<double> T; void buildProblem(std::vector<T>& coefficients, Eigen::VectorXd& b, int n); void saveAsBitmap(const Eigen::VectorXd& x, int n, const char* filename); int main(int argc, char** argv) { if(argc!=2) { std::cerr << "Error: expected one and only one argument.\n"; return -1; } int n = 300; // size of the image int m = n*n; // number of unknowns (=number of pixels) // Assembly: std::vector<T> coefficients; // list of non-zeros coefficients Eigen::VectorXd b(m); // the right hand side-vector resulting from the constraints buildProblem(coefficients, b, n); SpMat A(m,m); A.setFromTriplets(coefficients.begin(), coefficients.end()); // Solving: Eigen::SimplicialCholesky<SpMat> chol(A); // performs a Cholesky factorization of A Eigen::VectorXd x = chol.solve(b); // use the factorization to solve for the given right hand side // Export the result to a file: saveAsBitmap(x, n, argv[1]); return 0; }

In this example, we start by defining a column-major sparse matrix type of double SparseMatrix<double>, and a triplet list of the same scalar type Triplet<double>. A triplet is a simple object representing a non-zero entry as the triplet: row index, column index, value.

In the main function, we declare a list coefficients of triplets (as a std vector) and the right hand side vector \( b \) which are filled by the buildProblem function. The raw and flat list of non-zero entries is then converted to a true SparseMatrix object A. Note that the elements of the list do not have to be sorted, and possible duplicate entries will be summed up.

The last step consists of effectively solving the assembled problem. Since the resulting matrix A is symmetric by construction, we can perform a direct Cholesky factorization via the SimplicialLDLT class which behaves like its LDLT counterpart for dense objects.

The resulting vector x contains the pixel values as a 1D array which is saved to a jpeg file shown on the right of the code above.

Describing the buildProblem and save functions is out of the scope of this tutorial. They are given here for the curious and reproducibility purpose.

The SparseMatrix class

Matrix and vector properties
The SparseMatrix and SparseVector classes take three template arguments: the scalar type (e.g., double) the storage order (ColMajor or RowMajor, the default is ColMajor) the inner index type (default is int).

As for dense Matrix objects, constructors takes the size of the object. Here are some examples:

SparseMatrix<std::complex<float> > mat(1000,2000);         // declares a 1000x2000 column-major compressed sparse matrix of complex<float>
SparseMatrix<double,RowMajor> mat(1000,2000);              // declares a 1000x2000 row-major compressed sparse matrix of double
SparseVector<std::complex<float> > vec(1000);              // declares a column sparse vector of complex<float> of size 1000
SparseVector<double,RowMajor> vec(1000);                   // declares a row sparse vector of double of size 1000

In the rest of the tutorial, mat and vec represent any sparse-matrix and sparse-vector objects, respectively.

The dimensions of a matrix can be queried using the following functions:

mat.rows()
mat.cols()

vec.size() 

mat.innerSize()
mat.outerSize()

mat.nonZeros() 

vec.nonZeros() 

Iterating over the nonzero coefficients
Random access to the elements of a sparse object can be done through the coeffRef(i,j) function. However, this function involves a quite expensive binary search. In most cases, one only wants to iterate over the non-zeros elements. This is achieved by a standard loop over the outer dimension, and then by iterating over the non-zeros of the current inner vector via an InnerIterator. Thus, the non-zero entries have to be visited in the same order than the storage order. Here is an example:

SparseMatrix<double> mat(rows,cols);
for (int k=0; k<mat.outerSize(); ++k)
  for (SparseMatrix<double>::InnerIterator it(mat,k); it; ++it)
  {
    it.value();
    it.row();   // row index
    it.col();   // col index (here it is equal to k)
    it.index(); // inner index, here it is equal to it.row()
  }

SparseVector<double> vec(size);
for (SparseVector<double>::InnerIterator it(vec); it; ++it)
{
  it.value(); // == vec[ it.index() ]
  it.index();
}

For a writable expression, the referenced value can be modified using the valueRef() function. If the type of the sparse matrix or vector depends on a template parameter, then the typename keyword is required to indicate that InnerIterator denotes a type; see The template and typename keywords in C++ for details.

Filling a sparse matrix

Because of the special storage scheme of a SparseMatrix, special care has to be taken when adding new nonzero entries. For instance, the cost of a single purely random insertion into a SparseMatrix is O(nnz), where nnz is the current number of non-zero coefficients.

The simplest way to create a sparse matrix while guaranteeing good performance is thus to first build a list of so-called triplets, and then convert it to a SparseMatrix.

Here is a typical usage example:

typedef Eigen::Triplet<double> T;
std::vector<T> tripletList;
tripletList.reserve(estimation_of_entries);
for(...)
{
  // ...
  tripletList.push_back(T(i,j,v_ij));
}
SparseMatrixType mat(rows,cols);
mat.setFromTriplets(tripletList.begin(), tripletList.end());
// mat is ready to go!

The std::vector of triplets might contain the elements in arbitrary order, and might even contain duplicated elements that will be summed up by setFromTriplets(). See the SparseMatrix::setFromTriplets() function and class Triplet for more details.

In some cases, however, slightly higher performance, and lower memory consumption can be reached by directly inserting the non-zeros into the destination matrix. A typical scenario of this approach is illustrated below:

1: SparseMatrix<double> mat(rows,cols);         // default is column major
2: mat.reserve(VectorXi::Constant(cols,6));
3: for each i,j such that v_ij != 0
4:   mat.insert(i,j) = v_ij;                    // alternative: mat.coeffRef(i,j) += v_ij;
5: mat.makeCompressed();                        // optional

• The key ingredient here is the line 2 where we reserve room for 6 non-zeros per column. In many cases, the number of non-zeros per column or row can easily be known in advance. If it varies significantly for each inner vector, then it is possible to specify a reserve size for each inner vector by providing a vector object with an operator[](int j) returning the reserve size of the j-th inner vector (e.g., via a VectorXi or std::vector<int>). If only a rought estimate of the number of nonzeros per inner-vector can be obtained, it is highly recommended to overestimate it rather than the opposite. If this line is omitted, then the first insertion of a new element will reserve room for 2 elements per inner vector.
• The line 4 performs a sorted insertion. In this example, the ideal case is when the j-th column is not full and contains non-zeros whose inner-indices are smaller than i. In this case, this operation boils down to trivial O(1) operation.
• When calling insert(i,j) the element i ,j must not already exists, otherwise use the coeffRef(i,j) method that will allow to, e.g., accumulate values. This method first performs a binary search and finally calls insert(i,j) if the element does not already exist. It is more flexible than insert() but also more costly.
• The line 5 suppresses the remaining empty space and transforms the matrix into a compressed column storage.

Supported operators and functions

Because of their special storage format, sparse matrices cannot offer the same level of flexibility than dense matrices. In Eigen's sparse module we chose to expose only the subset of the dense matrix API which can be efficiently implemented. In the following sm denotes a sparse matrix, sv a sparse vector, dm a dense matrix, and dv a dense vector.

Basic operations

Sparse expressions support most of the unary and binary coefficient wise operations:

sm1.real()   sm1.imag()   -sm1                    0.5*sm1
sm1+sm2      sm1-sm2      sm1.cwiseProduct(sm2)

However, a strong restriction is that the storage orders must match. For instance, in the following example:

sm4 = sm1 + sm2 + sm3;

sm1, sm2, and sm3 must all be row-major or all column-major. On the other hand, there is no restriction on the target matrix sm4. For instance, this means that for computing \( A^T + A \), the matrix \( A^T \) must be evaluated into a temporary matrix of compatible storage order:

SparseMatrix<double> A, B;
B = SparseMatrix<double>(A.transpose()) + A;

Binary coefficient wise operators can also mix sparse and dense expressions:

sm2 = sm1.cwiseProduct(dm1);
dm2 = sm1 + dm1;
dm2 = dm1 - sm1;

Performance-wise, the adding/subtracting sparse and dense matrices is better performed in two steps. For instance, instead of doing dm2 = sm1 + dm1, better write:

dm2 = dm1;
dm2 += sm1;

This version has the advantage to fully exploit the higher performance of dense storage (no indirection, SIMD, etc.), and to pay the cost of slow sparse evaluation on the few non-zeros of the sparse matrix only.

Sparse expressions also support transposition:

sm1 = sm2.transpose();
sm1 = sm2.adjoint();

However, there is no transposeInPlace() method.

Matrix products

Eigen supports various kind of sparse matrix products which are summarize below:

• sparse-dense:

  dv2 = sm1 * dv1;
  dm2 = dm1 * sm1.adjoint();
  dm2 = 2. * sm1 * dm1;
  

• symmetric sparse-dense. The product of a sparse symmetric matrix with a dense matrix (or vector) can also be optimized by specifying the symmetry with selfadjointView():

  dm2 = sm1.selfadjointView<>() * dm1;        // if all coefficients of A are stored
  dm2 = A.selfadjointView<Upper>() * dm1;     // if only the upper part of A is stored
  dm2 = A.selfadjointView<Lower>() * dm1;     // if only the lower part of A is stored

• sparse-sparse. For sparse-sparse products, two different algorithms are available. The default one is conservative and preserve the explicit zeros that might appear:

  sm3 = sm1 * sm2;
  sm3 = 4 * sm1.adjoint() * sm2;
  

  The second algorithm prunes on the fly the explicit zeros, or the values smaller than a given threshold. It is enabled and controlled through the prune() functions:

  sm3 = (sm1 * sm2).pruned();                  // removes numerical zeros
  sm3 = (sm1 * sm2).pruned(ref);               // removes elements much smaller than ref
  sm3 = (sm1 * sm2).pruned(ref,epsilon);       // removes elements smaller than ref*epsilon
  

• permutations. Finally, permutations can be applied to sparse matrices too:

  PermutationMatrix<Dynamic,Dynamic> P = ...;
  sm2 = P * sm1;
  sm2 = sm1 * P.inverse();
  sm2 = sm1.transpose() * P;
  

Block operations

Regarding read-access, sparse matrices expose the same API than for dense matrices to access to sub-matrices such as blocks, columns, and rows. See Block operations for a detailed introduction. However, for performance reasons, writing to a sub-sparse-matrix is much more limited, and currently only contiguous sets of columns (resp. rows) of a column-major (resp. row-major) SparseMatrix are writable. Moreover, this information has to be known at compile-time, leaving out methods such as block(...) and corner*(...). The available API for write-access to a SparseMatrix are summarized below:

SparseMatrix<double,ColMajor> sm1;
sm1.col(j) = ...;
sm1.leftCols(ncols) = ...;
sm1.middleCols(j,ncols) = ...;
sm1.rightCols(ncols) = ...;
 
SparseMatrix<double,RowMajor> sm2;
sm2.row(i) = ...;
sm2.topRows(nrows) = ...;
sm2.middleRows(i,nrows) = ...;
sm2.bottomRows(nrows) = ...;

In addition, sparse matrices expose the SparseMatrixBase::innerVector() and SparseMatrixBase::innerVectors() methods, which are aliases to the col/middleCols methods for a column-major storage, and to the row/middleRows methods for a row-major storage.

Triangular and selfadjoint views

Just as with dense matrices, the triangularView() function can be used to address a triangular part of the matrix, and perform triangular solves with a dense right hand side:

dm2 = sm1.triangularView<Lower>(dm1);
dv2 = sm1.transpose().triangularView<Upper>(dv1);

The selfadjointView() function permits various operations:

• optimized sparse-dense matrix products:

  dm2 = sm1.selfadjointView<>() * dm1;        // if all coefficients of A are stored
  dm2 = A.selfadjointView<Upper>() * dm1;     // if only the upper part of A is stored
  dm2 = A.selfadjointView<Lower>() * dm1;     // if only the lower part of A is stored
  

• copy of triangular parts:

  sm2 = sm1.selfadjointView<Upper>();                               // makes a full selfadjoint matrix from the upper triangular part
  sm2.selfadjointView<Lower>() = sm1.selfadjointView<Upper>();      // copies the upper triangular part to the lower triangular part
  

• application of symmetric permutations:

  PermutationMatrix<Dynamic,Dynamic> P = ...;
  sm2 = A.selfadjointView<Upper>().twistedBy(P);                                // compute P S P' from the upper triangular part of A, and make it a full matrix
  sm2.selfadjointView<Lower>() = A.selfadjointView<Lower>().twistedBy(P);       // compute P S P' from the lower triangular part of A, and then only compute the lower part
  

Please, refer to the Quick Reference guide for the list of supported operations. The list of linear solvers available is here.