W3cubDocs

/Ansible 2.10

Plugin Index

These are the plugins in the community.network collection

Cliconf Plugins

  • aireos – Use aireos cliconf to run command on Cisco WLC platform
  • apconos – Use apconos cliconf to run command on APCON network devices
  • aruba – Use aruba cliconf to run command on Aruba platform
  • ce – Use ce cliconf to run command on HUAWEI CloudEngine platform
  • cnos – Use cnos cliconf to run command on Lenovo CNOS platform
  • edgeos – Use edgeos cliconf to run command on EdgeOS platform
  • edgeswitch – Use edgeswitch cliconf to run command on EdgeSwitch platform
  • enos – Use enos cliconf to run command on Lenovo ENOS platform
  • eric_eccli – Use eccli cliconf to run command on Ericsson ECCLI platform
  • exos – Use exos cliconf to run command on Extreme EXOS platform
  • icx – Use icx cliconf to run command on Ruckus ICX platform
  • ironware – Use ironware cliconf to run command on Extreme Ironware platform
  • netvisor – Use netvisor cliconf to run command on Pluribus netvisor platform
  • nos – Use nos cliconf to run command on Extreme NOS platform
  • routeros – Use routeros cliconf to run command on MikroTik RouterOS platform
  • slxos – Use slxos cliconf to run command on Extreme SLX-OS platform
  • voss – Use voss cliconf to run command on Extreme VOSS platform

Httpapi Plugins

  • exos – Use EXOS REST APIs to communicate with EXOS platform
  • fortianalyzer – HttpApi Plugin for Fortinet FortiAnalyzer Appliance or VM.
  • fortimanager – HttpApi Plugin for Fortinet FortiManager Appliance or VM.
  • ftd – HttpApi Plugin for Cisco ASA Firepower device

Lookup Plugins

  • avi – Look up Avi objects.

Modules

  • a10_server – Manage A10 Networks AX/SoftAX/Thunder/vThunder devices’ server object.
  • a10_server_axapi3 – Manage A10 Networks AX/SoftAX/Thunder/vThunder devices
  • a10_service_group – Manage A10 Networks AX/SoftAX/Thunder/vThunder devices’ service groups.
  • a10_virtual_server – Manage A10 Networks AX/SoftAX/Thunder/vThunder devices’ virtual servers.
  • aireos_command – Run commands on remote devices running Cisco WLC
  • aireos_config – Manage Cisco WLC configurations
  • apconos_command – Run arbitrary commands on APCON devices
  • aruba_command – Run commands on remote devices running Aruba Mobility Controller
  • aruba_config – Manage Aruba configuration sections
  • avi_actiongroupconfig – Module for setup of ActionGroupConfig Avi RESTful Object
  • avi_alertconfig – Module for setup of AlertConfig Avi RESTful Object
  • avi_alertemailconfig – Module for setup of AlertEmailConfig Avi RESTful Object
  • avi_alertscriptconfig – Module for setup of AlertScriptConfig Avi RESTful Object
  • avi_alertsyslogconfig – Module for setup of AlertSyslogConfig Avi RESTful Object
  • avi_analyticsprofile – Module for setup of AnalyticsProfile Avi RESTful Object
  • avi_api_session – Avi API Module
  • avi_api_version – Avi API Version Module
  • avi_applicationpersistenceprofile – Module for setup of ApplicationPersistenceProfile Avi RESTful Object
  • avi_applicationprofile – Module for setup of ApplicationProfile Avi RESTful Object
  • avi_authprofile – Module for setup of AuthProfile Avi RESTful Object
  • avi_autoscalelaunchconfig – Module for setup of AutoScaleLaunchConfig Avi RESTful Object
  • avi_backup – Module for setup of Backup Avi RESTful Object
  • avi_backupconfiguration – Module for setup of BackupConfiguration Avi RESTful Object
  • avi_certificatemanagementprofile – Module for setup of CertificateManagementProfile Avi RESTful Object
  • avi_cloud – Module for setup of Cloud Avi RESTful Object
  • avi_cloudconnectoruser – Module for setup of CloudConnectorUser Avi RESTful Object
  • avi_cloudproperties – Module for setup of CloudProperties Avi RESTful Object
  • avi_cluster – Module for setup of Cluster Avi RESTful Object
  • avi_clusterclouddetails – Module for setup of ClusterCloudDetails Avi RESTful Object
  • avi_controllerproperties – Module for setup of ControllerProperties Avi RESTful Object
  • avi_customipamdnsprofile – Module for setup of CustomIpamDnsProfile Avi RESTful Object
  • avi_dnspolicy – Module for setup of DnsPolicy Avi RESTful Object
  • avi_errorpagebody – Module for setup of ErrorPageBody Avi RESTful Object
  • avi_errorpageprofile – Module for setup of ErrorPageProfile Avi RESTful Object
  • avi_gslb – Module for setup of Gslb Avi RESTful Object
  • avi_gslbgeodbprofile – Module for setup of GslbGeoDbProfile Avi RESTful Object
  • avi_gslbservice – Module for setup of GslbService Avi RESTful Object
  • avi_gslbservice_patch_member – Avi API Module
  • avi_hardwaresecuritymodulegroup – Module for setup of HardwareSecurityModuleGroup Avi RESTful Object
  • avi_healthmonitor – Module for setup of HealthMonitor Avi RESTful Object
  • avi_httppolicyset – Module for setup of HTTPPolicySet Avi RESTful Object
  • avi_ipaddrgroup – Module for setup of IpAddrGroup Avi RESTful Object
  • avi_ipamdnsproviderprofile – Module for setup of IpamDnsProviderProfile Avi RESTful Object
  • avi_l4policyset – Module for setup of L4PolicySet Avi RESTful Object
  • avi_microservicegroup – Module for setup of MicroServiceGroup Avi RESTful Object
  • avi_network – Module for setup of Network Avi RESTful Object
  • avi_networkprofile – Module for setup of NetworkProfile Avi RESTful Object
  • avi_networksecuritypolicy – Module for setup of NetworkSecurityPolicy Avi RESTful Object
  • avi_pkiprofile – Module for setup of PKIProfile Avi RESTful Object
  • avi_pool – Module for setup of Pool Avi RESTful Object
  • avi_poolgroup – Module for setup of PoolGroup Avi RESTful Object
  • avi_poolgroupdeploymentpolicy – Module for setup of PoolGroupDeploymentPolicy Avi RESTful Object
  • avi_prioritylabels – Module for setup of PriorityLabels Avi RESTful Object
  • avi_role – Module for setup of Role Avi RESTful Object
  • avi_scheduler – Module for setup of Scheduler Avi RESTful Object
  • avi_seproperties – Module for setup of SeProperties Avi RESTful Object
  • avi_serverautoscalepolicy – Module for setup of ServerAutoScalePolicy Avi RESTful Object
  • avi_serviceengine – Module for setup of ServiceEngine Avi RESTful Object
  • avi_serviceenginegroup – Module for setup of ServiceEngineGroup Avi RESTful Object
  • avi_snmptrapprofile – Module for setup of SnmpTrapProfile Avi RESTful Object
  • avi_sslkeyandcertificate – Module for setup of SSLKeyAndCertificate Avi RESTful Object
  • avi_sslprofile – Module for setup of SSLProfile Avi RESTful Object
  • avi_stringgroup – Module for setup of StringGroup Avi RESTful Object
  • avi_systemconfiguration – Module for setup of SystemConfiguration Avi RESTful Object
  • avi_tenant – Module for setup of Tenant Avi RESTful Object
  • avi_trafficcloneprofile – Module for setup of TrafficCloneProfile Avi RESTful Object
  • avi_user – Avi User Module
  • avi_useraccount – Avi UserAccount Module
  • avi_useraccountprofile – Module for setup of UserAccountProfile Avi RESTful Object
  • avi_virtualservice – Module for setup of VirtualService Avi RESTful Object
  • avi_vrfcontext – Module for setup of VrfContext Avi RESTful Object
  • avi_vsdatascriptset – Module for setup of VSDataScriptSet Avi RESTful Object
  • avi_vsvip – Module for setup of VsVip Avi RESTful Object
  • avi_webhook – Module for setup of Webhook Avi RESTful Object
  • bcf_switch – Create and remove a bcf switch.
  • bigmon_chain – Create and remove a bigmon inline service chain.
  • bigmon_policy – Create and remove a bigmon out-of-band policy.
  • ce_aaa_server – Manages AAA server global configuration on HUAWEI CloudEngine switches.
  • ce_aaa_server_host – Manages AAA server host configuration on HUAWEI CloudEngine switches.
  • ce_acl – Manages base ACL configuration on HUAWEI CloudEngine switches.
  • ce_acl_advance – Manages advanced ACL configuration on HUAWEI CloudEngine switches.
  • ce_acl_interface – Manages applying ACLs to interfaces on HUAWEI CloudEngine switches.
  • ce_bfd_global – Manages BFD global configuration on HUAWEI CloudEngine devices.
  • ce_bfd_session – Manages BFD session configuration on HUAWEI CloudEngine devices.
  • ce_bfd_view – Manages BFD session view configuration on HUAWEI CloudEngine devices.
  • ce_bgp – Manages BGP configuration on HUAWEI CloudEngine switches.
  • ce_bgp_af – Manages BGP Address-family configuration on HUAWEI CloudEngine switches.
  • ce_bgp_neighbor – Manages BGP peer configuration on HUAWEI CloudEngine switches.
  • ce_bgp_neighbor_af – Manages BGP neighbor Address-family configuration on HUAWEI CloudEngine switches.
  • ce_command – Run arbitrary command on HUAWEI CloudEngine devices.
  • ce_config – Manage Huawei CloudEngine configuration sections.
  • ce_dldp – Manages global DLDP configuration on HUAWEI CloudEngine switches.
  • ce_dldp_interface – Manages interface DLDP configuration on HUAWEI CloudEngine switches.
  • ce_eth_trunk – Manages Eth-Trunk interfaces on HUAWEI CloudEngine switches.
  • ce_evpn_bd_vni – Manages EVPN VXLAN Network Identifier (VNI) on HUAWEI CloudEngine switches.
  • ce_evpn_bgp – Manages BGP EVPN configuration on HUAWEI CloudEngine switches.
  • ce_evpn_bgp_rr – Manages RR for the VXLAN Network on HUAWEI CloudEngine switches.
  • ce_evpn_global – Manages global configuration of EVPN on HUAWEI CloudEngine switches.
  • ce_facts – Gets facts about HUAWEI CloudEngine switches.
  • ce_file_copy – Copy a file to a remote cloudengine device over SCP on HUAWEI CloudEngine switches.
  • ce_info_center_debug – Manages information center debug configuration on HUAWEI CloudEngine switches.
  • ce_info_center_global – Manages outputting logs on HUAWEI CloudEngine switches.
  • ce_info_center_log – Manages information center log configuration on HUAWEI CloudEngine switches.
  • ce_info_center_trap – Manages information center trap configuration on HUAWEI CloudEngine switches.
  • ce_interface – Manages physical attributes of interfaces on HUAWEI CloudEngine switches.
  • ce_interface_ospf – Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches.
  • ce_ip_interface – Manages L3 attributes for IPv4 and IPv6 interfaces on HUAWEI CloudEngine switches.
  • ce_is_is_instance – Manages isis process id configuration on HUAWEI CloudEngine devices.
  • ce_is_is_interface – Manages isis interface configuration on HUAWEI CloudEngine devices.
  • ce_is_is_view – Manages isis view configuration on HUAWEI CloudEngine devices.
  • ce_lacp – Manages Eth-Trunk interfaces on HUAWEI CloudEngine switches
  • ce_link_status – Get interface link status on HUAWEI CloudEngine switches.
  • ce_lldp – Manages LLDP configuration on HUAWEI CloudEngine switches.
  • ce_lldp_interface – Manages INTERFACE LLDP configuration on HUAWEI CloudEngine switches.
  • ce_mdn_interface – Manages MDN configuration on HUAWEI CloudEngine switches.
  • ce_mlag_config – Manages MLAG configuration on HUAWEI CloudEngine switches.
  • ce_mlag_interface – Manages MLAG interfaces on HUAWEI CloudEngine switches.
  • ce_mtu – Manages MTU settings on HUAWEI CloudEngine switches.
  • ce_multicast_global – Manages multicast global configuration on HUAWEI CloudEngine switches.
  • ce_multicast_igmp_enable – Manages multicast igmp enable configuration on HUAWEI CloudEngine switches.
  • ce_netconf – Run an arbitrary netconf command on HUAWEI CloudEngine switches.
  • ce_netstream_aging – Manages timeout mode of NetStream on HUAWEI CloudEngine switches.
  • ce_netstream_export – Manages netstream export on HUAWEI CloudEngine switches.
  • ce_netstream_global – Manages global parameters of NetStream on HUAWEI CloudEngine switches.
  • ce_netstream_template – Manages NetStream template configuration on HUAWEI CloudEngine switches.
  • ce_ntp – Manages core NTP configuration on HUAWEI CloudEngine switches.
  • ce_ntp_auth – Manages NTP authentication configuration on HUAWEI CloudEngine switches.
  • ce_ospf – Manages configuration of an OSPF instance on HUAWEI CloudEngine switches.
  • ce_ospf_vrf – Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.
  • ce_reboot – Reboot a HUAWEI CloudEngine switches.
  • ce_rollback – Set a checkpoint or rollback to a checkpoint on HUAWEI CloudEngine switches.
  • ce_sflow – Manages sFlow configuration on HUAWEI CloudEngine switches.
  • ce_snmp_community – Manages SNMP community configuration on HUAWEI CloudEngine switches.
  • ce_snmp_contact – Manages SNMP contact configuration on HUAWEI CloudEngine switches.
  • ce_snmp_location – Manages SNMP location configuration on HUAWEI CloudEngine switches.
  • ce_snmp_target_host – Manages SNMP target host configuration on HUAWEI CloudEngine switches.
  • ce_snmp_traps – Manages SNMP traps configuration on HUAWEI CloudEngine switches.
  • ce_snmp_user – Manages SNMP user configuration on HUAWEI CloudEngine switches.
  • ce_startup – Manages a system startup information on HUAWEI CloudEngine switches.
  • ce_static_route – Manages static route configuration on HUAWEI CloudEngine switches.
  • ce_static_route_bfd – Manages static route configuration on HUAWEI CloudEngine switches.
  • ce_stp – Manages STP configuration on HUAWEI CloudEngine switches.
  • ce_switchport – Manages Layer 2 switchport interfaces on HUAWEI CloudEngine switches.
  • ce_vlan – Manages VLAN resources and attributes on Huawei CloudEngine switches.
  • ce_vrf – Manages VPN instance on HUAWEI CloudEngine switches.
  • ce_vrf_af – Manages VPN instance address family on HUAWEI CloudEngine switches.
  • ce_vrf_interface – Manages interface specific VPN configuration on HUAWEI CloudEngine switches.
  • ce_vrrp – Manages VRRP interfaces on HUAWEI CloudEngine devices.
  • ce_vxlan_arp – Manages ARP attributes of VXLAN on HUAWEI CloudEngine devices.
  • ce_vxlan_gateway – Manages gateway for the VXLAN network on HUAWEI CloudEngine devices.
  • ce_vxlan_global – Manages global attributes of VXLAN and bridge domain on HUAWEI CloudEngine devices.
  • ce_vxlan_tunnel – Manages VXLAN tunnel configuration on HUAWEI CloudEngine devices.
  • ce_vxlan_vap – Manages VXLAN virtual access point on HUAWEI CloudEngine Devices.
  • cnos_backup – Backup the current running or startup configuration to a remote server on devices running Lenovo CNOS
  • cnos_banner – Manage multiline banners on Lenovo CNOS devices
  • cnos_bgp – Manage BGP resources and attributes on devices running CNOS
  • cnos_command – Run arbitrary commands on Lenovo CNOS devices
  • cnos_conditional_command – Execute a single command based on condition on devices running Lenovo CNOS
  • cnos_conditional_template – Manage switch configuration using templates based on condition on devices running Lenovo CNOS
  • cnos_config – Manage Lenovo CNOS configuration sections
  • cnos_factory – Reset the switch startup configuration to default (factory) on devices running Lenovo CNOS.
  • cnos_facts – Collect facts from remote devices running Lenovo CNOS
  • cnos_image – Perform firmware upgrade/download from a remote server on devices running Lenovo CNOS
  • cnos_interface – Manage Interface on Lenovo CNOS network devices
  • cnos_l2_interface – Manage Layer-2 interface on Lenovo CNOS devices.
  • cnos_l3_interface – Manage Layer-3 interfaces on Lenovo CNOS network devices.
  • cnos_linkagg – Manage link aggregation groups on Lenovo CNOS devices
  • cnos_lldp – Manage LLDP configuration on Lenovo CNOS network devices.
  • cnos_logging – Manage logging on network devices
  • cnos_reload – Perform switch restart on devices running Lenovo CNOS
  • cnos_rollback – Roll back the running or startup configuration from a remote server on devices running Lenovo CNOS
  • cnos_save – Save the running configuration as the startup configuration on devices running Lenovo CNOS
  • cnos_showrun – Collect the current running configuration on devices running on CNOS
  • cnos_static_route – Manage static IP routes on Lenovo CNOS network devices
  • cnos_system – Manage the system attributes on Lenovo CNOS devices
  • cnos_template – Manage switch configuration using templates on devices running Lenovo CNOS
  • cnos_user – Manage the collection of local users on Lenovo CNOS devices
  • cnos_vlag – Manage VLAG resources and attributes on devices running Lenovo CNOS
  • cnos_vlan – Manage VLANs on CNOS network devices
  • cnos_vrf – Manage VRFs on Lenovo CNOS network devices
  • cp_publish – All the changes done by this user will be seen by all users only after publish is called.
  • cv_server_provision – Provision server port by applying or removing template configuration to an Arista CloudVision Portal configlet that is applied to a switch.
  • dladm_etherstub – Manage etherstubs on Solaris/illumos systems.
  • dladm_iptun – Manage IP tunnel interfaces on Solaris/illumos systems.
  • dladm_linkprop – Manage link properties on Solaris/illumos systems.
  • dladm_vlan – Manage VLAN interfaces on Solaris/illumos systems.
  • dladm_vnic – Manage VNICs on Solaris/illumos systems.
  • edgeos_command – Run one or more commands on EdgeOS devices
  • edgeos_config – Manage EdgeOS configuration on remote device
  • edgeos_facts – Collect facts from remote devices running EdgeOS
  • edgeswitch_facts – Collect facts from remote devices running Edgeswitch
  • edgeswitch_vlan – Manage VLANs on Ubiquiti Edgeswitch network devices
  • enos_command – Run arbitrary commands on Lenovo ENOS devices
  • enos_config – Manage Lenovo ENOS configuration sections
  • enos_facts – Collect facts from remote devices running Lenovo ENOS
  • eric_eccli_command – Run commands on remote devices running ERICSSON ECCLI
  • exos_command – Run commands on remote devices running Extreme EXOS
  • exos_config – Manage Extreme Networks EXOS configuration sections
  • exos_facts – Collect facts from devices running Extreme EXOS
  • exos_l2_interfaces – Manage L2 interfaces on Extreme Networks EXOS devices.
  • exos_lldp_global – Configure and manage Link Layer Discovery Protocol(LLDP) attributes on EXOS platforms.
  • exos_lldp_interfaces – Manage link layer discovery protocol (LLDP) attributes of interfaces on EXOS platforms.
  • exos_vlans – Manage VLANs on Extreme Networks EXOS devices.
  • faz_device – Add or remove device
  • flowadm – Manage bandwidth resource control and priority for protocols, services and zones on Solaris/illumos systems
  • fmgr_device – Add or remove device from FortiManager.
  • fmgr_device_config – Edit device configurations
  • fmgr_device_group – Alter FortiManager device groups.
  • fmgr_device_provision_template – Manages Device Provisioning Templates in FortiManager.
  • fmgr_fwobj_address – Allows the management of firewall objects in FortiManager
  • fmgr_fwobj_ippool – Allows the editing of IP Pool Objects within FortiManager.
  • fmgr_fwobj_ippool6 – Allows the editing of IP Pool Objects within FortiManager.
  • fmgr_fwobj_service – Manages FortiManager Firewall Service Objects.
  • fmgr_fwobj_vip – Manages Virtual IPs objects in FortiManager
  • fmgr_fwpol_ipv4 – Allows the add/delete of Firewall Policies on Packages in FortiManager.
  • fmgr_fwpol_package – Manages FortiManager Firewall Policies Packages.
  • fmgr_ha – Manages the High-Availability State of FortiManager Clusters and Nodes.
  • fmgr_provisioning – Provision devices via FortiMananger
  • fmgr_query – Query FortiManager data objects for use in Ansible workflows.
  • fmgr_script – Add/Edit/Delete and execute scripts
  • fmgr_secprof_appctrl – Manage application control security profiles
  • fmgr_secprof_av – Manage security profile
  • fmgr_secprof_dns – Manage DNS security profiles in FortiManager
  • fmgr_secprof_ips – Managing IPS security profiles in FortiManager
  • fmgr_secprof_profile_group – Manage security profiles within FortiManager
  • fmgr_secprof_proxy – Manage proxy security profiles in FortiManager
  • fmgr_secprof_spam – spam filter profile for FMG
  • fmgr_secprof_ssl_ssh – Manage SSL and SSH security profiles in FortiManager
  • fmgr_secprof_voip – VOIP security profiles in FMG
  • fmgr_secprof_waf – FortiManager web application firewall security profile
  • fmgr_secprof_wanopt – WAN optimization
  • fmgr_secprof_web – Manage web filter security profiles in FortiManager
  • ftd_configuration – Manages configuration on Cisco FTD devices over REST API
  • ftd_file_download – Downloads files from Cisco FTD devices over HTTP(S)
  • ftd_file_upload – Uploads files to Cisco FTD devices over HTTP(S)
  • ftd_install – Installs FTD pkg image on the firewall
  • iap_start_workflow – Start a workflow in the Itential Automation Platform
  • iap_token – Get token for the Itential Automation Platform
  • icx_banner – Manage multiline banners on Ruckus ICX 7000 series switches
  • icx_command – Run arbitrary commands on remote Ruckus ICX 7000 series switches
  • icx_config – Manage configuration sections of Ruckus ICX 7000 series switches
  • icx_copy – Transfer files from or to remote Ruckus ICX 7000 series switches
  • icx_facts – Collect facts from remote Ruckus ICX 7000 series switches
  • icx_interface – Manage Interface on Ruckus ICX 7000 series switches
  • icx_l3_interface – Manage Layer-3 interfaces on Ruckus ICX 7000 series switches
  • icx_linkagg – Manage link aggregation groups on Ruckus ICX 7000 series switches
  • icx_lldp – Manage LLDP configuration on Ruckus ICX 7000 series switches
  • icx_logging – Manage logging on Ruckus ICX 7000 series switches
  • icx_ping – Tests reachability using ping from Ruckus ICX 7000 series switches
  • icx_static_route – Manage static IP routes on Ruckus ICX 7000 series switches
  • icx_system – Manage the system attributes on Ruckus ICX 7000 series switches
  • icx_user – Manage the user accounts on Ruckus ICX 7000 series switches.
  • icx_vlan – Manage VLANs on Ruckus ICX 7000 series switches
  • ig_config – Manage the configuration database on an Ingate SBC.
  • ig_unit_information – Get unit information from an Ingate SBC.
  • ipadm_addr – Manage IP addresses on an interface on Solaris/illumos systems
  • ipadm_addrprop – Manage IP address properties on Solaris/illumos systems.
  • ipadm_if – Manage IP interfaces on Solaris/illumos systems.
  • ipadm_ifprop – Manage IP interface properties on Solaris/illumos systems.
  • ipadm_prop – Manage protocol properties on Solaris/illumos systems.
  • ironware_command – Run arbitrary commands on Extreme IronWare devices
  • ironware_config – Manage configuration sections on Extreme Ironware devices
  • ironware_facts – Collect facts from devices running Extreme Ironware
  • nclu – Configure network interfaces using NCLU
  • netact_cm_command – Manage network configuration data in Nokia Core and Radio networks
  • netscaler_cs_action – Manage content switching actions
  • netscaler_cs_policy – Manage content switching policy
  • netscaler_cs_vserver – Manage content switching vserver
  • netscaler_gslb_service – Manage gslb service entities in Netscaler.
  • netscaler_gslb_site – Manage gslb site entities in Netscaler.
  • netscaler_gslb_vserver – Configure gslb vserver entities in Netscaler.
  • netscaler_lb_monitor – Manage load balancing monitors
  • netscaler_lb_vserver – Manage load balancing vserver configuration
  • netscaler_nitro_request – Issue Nitro API requests to a Netscaler instance.
  • netscaler_save_config – Save Netscaler configuration.
  • netscaler_server – Manage server configuration
  • netscaler_service – Manage service configuration in Netscaler
  • netscaler_servicegroup – Manage service group configuration in Netscaler
  • netscaler_ssl_certkey – Manage ssl certificate keys.
  • nos_command – Run commands on remote devices running Extreme Networks NOS
  • nos_config – Manage Extreme Networks NOS configuration sections
  • nos_facts – Collect facts from devices running Extreme NOS
  • nso_action – Executes Cisco NSO actions and verifies output.
  • nso_config – Manage Cisco NSO configuration and service synchronization.
  • nso_query – Query data from Cisco NSO.
  • nso_show – Displays data from Cisco NSO.
  • nso_verify – Verifies Cisco NSO configuration.
  • nuage_vspk – Manage Nuage VSP environments
  • opx_cps – CPS operations on networking device running Openswitch (OPX)
  • ordnance_config – Manage Ordnance configuration sections
  • ordnance_facts – Collect facts from Ordnance Virtual Routers over SSH
  • panos_admin – Add or modify PAN-OS user accounts password.
  • panos_admpwd – change admin password of PAN-OS device using SSH with SSH key
  • panos_cert_gen_ssh – generates a self-signed certificate using SSH protocol with SSH key
  • panos_check – check if PAN-OS device is ready for configuration
  • panos_commit – commit firewall’s candidate configuration
  • panos_dag – create a dynamic address group
  • panos_dag_tags – Create tags for DAG’s on PAN-OS devices.
  • panos_import – import file on PAN-OS devices
  • panos_interface – configure data-port network interface for DHCP
  • panos_lic – apply authcode to a device/instance
  • panos_loadcfg – load configuration on PAN-OS device
  • panos_match_rule – Test for match against a security rule on PAN-OS devices or Panorama management console.
  • panos_mgtconfig – configure management settings of device
  • panos_nat_rule – create a policy NAT rule
  • panos_object – create/read/update/delete object in PAN-OS or Panorama
  • panos_op – execute arbitrary OP commands on PANW devices (e.g. show interface all)
  • panos_pg – create a security profiles group
  • panos_query_rules – PANOS module that allows search for security rules in PANW NGFW devices.
  • panos_restart – restart a device
  • panos_sag – Create a static address group.
  • panos_security_rule – Create security rule policy on PAN-OS devices or Panorama management console.
  • panos_set – Execute arbitrary commands on a PAN-OS device using XPath and element
  • pn_access_list – CLI command to create/delete access-list
  • pn_access_list_ip – CLI command to add/remove access-list-ip
  • pn_admin_service – CLI command to modify admin-service
  • pn_admin_session_timeout – CLI command to modify admin-session-timeout
  • pn_admin_syslog – CLI command to create/modify/delete admin-syslog
  • pn_cluster – CLI command to create/delete a cluster.
  • pn_connection_stats_settings – CLI command to modify connection-stats-settings
  • pn_cpu_class – CLI command to create/modify/delete cpu-class
  • pn_cpu_mgmt_class – CLI command to modify cpu-mgmt-class
  • pn_dhcp_filter – CLI command to create/modify/delete dhcp-filter
  • pn_dscp_map – CLI command to create/delete dscp-map
  • pn_dscp_map_pri_map – CLI command to modify dscp-map-pri-map
  • pn_fabric_local – CLI command to modify fabric-local
  • pn_igmp_snooping – CLI command to modify igmp-snooping
  • pn_ipv6security_raguard – CLI command to create/modify/delete ipv6security-raguard
  • pn_ipv6security_raguard_port – CLI command to add/remove ipv6security-raguard-port
  • pn_ipv6security_raguard_vlan – CLI command to add/remove ipv6security-raguard-vlan
  • pn_log_audit_exception – CLI command to create/delete an audit exception
  • pn_ospf – CLI command to add/remove ospf protocol to a vRouter.
  • pn_ospfarea – CLI command to add/remove ospf area to/from a vrouter.
  • pn_port_config – CLI command to modify port-config
  • pn_port_cos_bw – CLI command to modify port-cos-bw
  • pn_port_cos_rate_setting – CLI command to modify port-cos-rate-setting
  • pn_prefix_list – CLI command to create/delete prefix-list
  • pn_prefix_list_network – CLI command to add/remove prefix-list-network
  • pn_role – CLI command to create/delete/modify role
  • pn_show – Run show commands on nvOS device.
  • pn_snmp_community – CLI command to create/modify/delete snmp-community
  • pn_snmp_trap_sink – CLI command to create/delete snmp-trap-sink
  • pn_snmp_vacm – CLI command to create/modify/delete snmp-vacm
  • pn_stp – CLI command to modify stp
  • pn_stp_port – CLI command to modify stp-port.
  • pn_switch_setup – CLI command to modify switch-setup
  • pn_trunk – CLI command to create/delete/modify a trunk.
  • pn_user – CLI command to create/modify/delete user
  • pn_vflow_table_profile – CLI command to modify vflow-table-profile
  • pn_vlag – CLI command to create/delete/modify vlag.
  • pn_vlan – CLI command to create/delete a VLAN.
  • pn_vrouter – CLI command to create/delete/modify a vrouter.
  • pn_vrouter_bgp – CLI command to add/modify/remove vrouter-bgp
  • pn_vrouter_bgp_network – CLI command to add/remove vrouter-bgp-network
  • pn_vrouter_interface_ip – CLI command to add/remove vrouter-interface-ip
  • pn_vrouter_loopback_interface – CLI command to add/remove vrouter-loopback-interface
  • pn_vrouter_ospf – CLI command to add/remove vrouter-ospf
  • pn_vrouter_ospf6 – CLI command to add/remove vrouter-ospf6
  • pn_vrouter_packet_relay – CLI command to add/remove vrouter-packet-relay
  • pn_vrouter_pim_config – CLI command to modify vrouter-pim-config
  • pn_vrouterbgp – CLI command to add/remove/modify vrouter-bgp.
  • pn_vrouterif – CLI command to add/remove/modify vrouter-interface.
  • pn_vrouterlbif – CLI command to add/remove vrouter-loopback-interface.
  • pn_vtep – CLI command to create/delete vtep
  • routeros_api – Ansible module for RouterOS API
  • routeros_command – Run commands on remote devices running MikroTik RouterOS
  • routeros_facts – Collect facts from remote devices running MikroTik RouterOS
  • slxos_command – Run commands on remote devices running Extreme Networks SLX-OS
  • slxos_config – Manage Extreme Networks SLX-OS configuration sections
  • slxos_facts – Collect facts from devices running Extreme SLX-OS
  • slxos_interface – Manage Interfaces on Extreme SLX-OS network devices
  • slxos_l2_interface – Manage Layer-2 interface on Extreme Networks SLX-OS devices.
  • slxos_l3_interface – Manage L3 interfaces on Extreme Networks SLX-OS network devices.
  • slxos_linkagg – Manage link aggregation groups on Extreme Networks SLX-OS network devices
  • slxos_lldp – Manage LLDP configuration on Extreme Networks SLX-OS network devices.
  • slxos_vlan – Manage VLANs on Extreme Networks SLX-OS network devices
  • sros_command – Run commands on remote devices running Nokia SR OS
  • sros_config – Manage Nokia SR OS device configuration
  • sros_rollback – Configure Nokia SR OS rollback
  • vdirect_commit – Commits pending configuration changes on Radware devices
  • vdirect_file – Uploads a new or updates an existing runnable file into Radware vDirect server
  • vdirect_runnable – Runs templates and workflow actions in Radware vDirect server
  • voss_command – Run commands on remote devices running Extreme VOSS
  • voss_config – Manage Extreme VOSS configuration sections
  • voss_facts – Collect facts from remote devices running Extreme VOSS

Netconf Plugins

  • ce – Use ce netconf plugin to run netconf commands on Huawei Cloudengine platform
  • sros – Use Nokia SROS netconf plugin to run netconf commands on Nokia SROS platform

See also

List of collections with docs hosted here.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/community/network/index.html