W3cubDocs

/Ansible 2.9

iosxr_l2_interfaces – Manage Layer-2 interface on Cisco IOS-XR devices

New in version 2.9.

Synopsis

  • This module manages the Layer-2 interface attributes on Cisco IOS-XR devices.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
A dictionary of Layer-2 interface options
l2protocol
list
Configures Layer 2 protocol tunneling and protocol data unit (PDU) filtering on an interface.
cdp
string
    Choices:
  • drop
  • forward
  • tunnel
Cisco Discovery Protocol (CDP) tunneling and data unit parameters.
pvst
string
    Choices:
  • drop
  • forward
  • tunnel
Configures the per-VLAN Spanning Tree Protocol (PVST) tunneling and data unit parameters.
stp
string
    Choices:
  • drop
  • forward
  • tunnel
Spanning Tree Protocol (STP) tunneling and data unit parameters.
vtp
string
    Choices:
  • drop
  • forward
  • tunnel
VLAN Trunk Protocol (VTP) tunneling and data unit parameters.
l2transport
boolean
    Choices:
  • no
  • yes
Switchport mode access command to configure the interface as a layer 2 access
name
string / required
Full name of the interface/sub-interface excluding any logical unit number, e.g. GigabitEthernet0/0/0/1 or GigabitEthernet0/0/0/1.100.
native_vlan
integer
Configure a native VLAN ID for the trunk
propagate
boolean
    Choices:
  • no
  • yes
Propagate Layer 2 transport events. Note that it will work only when the l2tranport option is set to TRUE
q_vlan
list
802.1Q VLAN configuration. Note that it can accept either 2 VLAN IDs when configuring Q-in-Q VLAN, or it will accept 1 VLAN ID and 'any' as input list when configuring Q-in-any vlan as input. Note, that this option is valid only with respect to Sub-Interface and is not valid when configuring for Interface.
state
string
    Choices:
  • merged
  • replaced
  • overridden
  • deleted
The state of the configuration after module completion

Notes

Note

Examples

---
# Using merged
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  description Test description
# !

- name: Merge provided configuration with device configuration
  iosxr_l2_interfaces:
    config:
      - name: GigabitEthernet0/0/0/3
        native_vlan: 20
      - name: GigabitEthernet0/0/0/4
        native_vlan: 40
        l2transport: True
        l2protocol:
        - stp: tunnel
      - name: GigabitEthernet0/0/0/3.900
        l2transport: True
        q_vlan:
        - 20
        - 40
    state: merged

# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
#  dot1q native vlan 10
#  l2transport
#   l2protocol stp tunnel
#  !
# !
# interface GigabitEthernet0/0/0/3.900 l2transport
#  dot1q vlan 20 40
# !

# Using replaced
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
#  dot1q native vlan 10
#  l2transport
#   l2protocol stp tunnel
#  !
# !
# interface GigabitEthernet0/0/0/3.900 l2transport
#  dot1q vlan 20 40
# !

- name: Replaces device configuration of listed interfaces with provided configuration
  iosxr_l2_interfaces:
    config:
      - name: GigabitEthernet0/0/0/4
        native_vlan: 40
        l2transport: True
        l2protocol:
        - stp: forward
      - name: GigabitEthernet0/0/0/3.900
        q_vlan:
        - 20
        - any
    state: replaced

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
#  dot1q native vlan 40
#  l2transport
#   l2protocol stp forward
#  !
# !
# interface GigabitEthernet0/0/0/3.900 l2transport
#  dot1q vlan 20 any
# !

# Using overridden
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
# description Test description
#  dot1q native vlan 10
#  l2transport
#   l2protocol stp tunnel
#  !
# !
# interface GigabitEthernet0/0/0/3.900 l2transport
#  dot1q vlan 20 40
# !

- name: Override device configuration of all interfaces with provided configuration
  iosxr_l2_interfaces:
    config:
      - name: GigabitEthernet0/0/0/4
        native_vlan: 40
        l2transport: True
        l2protocol:
        - stp: forward
      - name: GigabitEthernet0/0/0/3.900
        q_vlan:
        - 20
        - any
    state: overridden

# After state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
# description Test description
#  dot1q native vlan 40
#  l2transport
#   l2protocol stp forward
#  !
# !
# interface GigabitEthernet0/0/0/3.900
#  dot1q vlan 20 any
# !

# Using deleted
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
#  description Test description
#  dot1q native vlan 10
#  l2transport
#   l2protocol stp tunnel
#  !
# !
#

- name: "Delete L2 attributes of given interfaces (Note: This won't delete the interface itself)"
  iosxr_l2_interfaces:
    config:
      - name: GigabitEthernet0/0/0/4
    state: deleted

# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
#  description Test description
# !

# Using Deleted without any config passed
# "(NOTE: This will delete all of configured resource module attributes from each configured interface)"
#
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 20
# !
# interface GigabitEthernet0/0/0/4
#  description Test description
#  dot1q native vlan 10
#  l2transport
#   l2protocol stp tunnel
#  !
# !

- name: "Delete L2 attributes of all interfaces (Note: This won't delete the interface itself)"
  iosxr_l2_interfaces:
    state: deleted

# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/3
#  description Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  description Test description
# !

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device

Sample:
['interface GigabitEthernet0/0/0/2', 'command 2', 'command 3']


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Sumit Jaiswal (@justjais)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/iosxr_l2_interfaces_module.html