New in version 2.9.
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments | ||
|---|---|---|---|---|
| config list / elements=dictionary | A dictionary of Layer 3 interface options | |||
| ipv4 list / elements=dictionary | IPv4 addresses to be set for the Layer 3 logical interface mentioned in name option. The address format is <ipv4 address>/<mask>. The mask is number in range 0-32 for example, 192.0.2.1/24, or dhcp to query DHCP for an IP address | |||
| address string | IPv4 address to be set for the specific interface | |||
| ipv6 list / elements=dictionary | IPv6 addresses to be set for the Layer 3 logical interface mentioned in name option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 for example, 2001:db8:2201:1::1/64 or auto-config to use SLAAC | |||
| address string | IPv6 address to be set for the specific interface | |||
| name string / required | Full name of interface, e.g. ge-0/0/1 | |||
| unit integer | Default: 0 | Logical interface number. Value of unit should be of type integer | ||
| state string |
| The state of the configuration after module completion | ||
Note
netconf. See the Junos OS Platform Options.# Using deleted
# Before state:
# -------------
#
# admin# show interfaces
# ge-0/0/1 {
# description "L3 interface";
# unit 0 {
# family inet {
# address 10.200.16.10/24;
# }
# }
# }
# ge-0/0/2 {
# description "non L3 interface";
# unit 0 {
# family ethernet-switching {
# interface-mode access;
# vlan {
# members 2;
# }
# }
# }
# }
- name: Delete JUNOS L3 logical interface
junos_l3_interfaces:
config:
- name: ge-0/0/1
- name: ge-0/0/2
state: deleted
# After state:
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
# description "deleted L3 interface";
# }
# ge-0/0/2 {
# description "non L3 interface";
# unit 0 {
# family ethernet-switching {
# interface-mode access;
# vlan {
# members 2;
# }
# }
# }
# }
# Using merged
# Before state
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
# description "L3 interface";
# unit 0 {
# family inet {
# address 10.200.16.10/24;
# }
# }
# }
# ge-0/0/2 {
# description "non configured interface";
# unit 0;
# }
- name: Merge provided configuration with device configuration (default operation is merge)
junos_l3_interfaces:
config:
- name: ge-0/0/1
ipv4:
- address: 192.168.1.10/24
ipv6:
- address: 8d8d:8d01::1/64
- name: ge-0/0/2
ipv4:
- address: dhcp
state: merged
# After state:
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
# description "L3 interface";
# unit 0 {
# family inet {
# address 10.200.16.10/24;
# address 192.168.1.10/24;
# }
# family inet6 {
# address 8d8d:8d01::1/64;
# }
# }
# }
# ge-0/0/2 {
# description "L3 interface with dhcp";
# unit 0 {
# family inet {
# dhcp;
# }
# }
# }
# Using overridden
# Before state
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
# description "L3 interface";
# unit 0 {
# family inet {
# address 10.200.16.10/24;
# }
# }
# }
# ge-0/0/2 {
# description "L3 interface with dhcp";
# unit 0 {
# family inet {
# dhcp;
# }
# }
# }
# ge-0/0/3 {
# description "another L3 interface";
# unit 0 {
# family inet {
# address 192.168.1.10/24;
# }
# }
# }
- name: Override provided configuration with device configuration
junos_l3_interfaces:
config:
- name: ge-0/0/1
ipv4:
- address: 192.168.1.10/24
ipv6:
- address: 8d8d:8d01::1/64
- name: ge-0/0/2
ipv6:
- address: 2001:db8:3000::/64
state: overridden
# After state:
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
# description "L3 interface";
# unit 0 {
# family inet {
# address 192.168.1.10/24;
# }
# family inet6 {
# address 8d8d:8d01::1/64;
# }
# }
# }
# ge-0/0/2 {
# description "L3 interface with ipv6";
# unit 0 {
# family inet6 {
# address 2001:db8:3000::/64;
# }
# }
# }
# ge-0/0/3 {
# description "overridden L3 interface";
# unit 0;
# }
# Using replaced
# Before state
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
# description "L3 interface";
# unit 0 {
# family inet {
# address 10.200.16.10/24;
# }
# }
# }
# ge-0/0/2 {
# description "non configured interface";
# unit 0;
# }
# ge-0/0/3 {
# description "another L3 interface";
# unit 0 {
# family inet {
# address 192.168.1.10/24;
# }
# }
# }
- name: Replace provided configuration with device configuration
junos_l3_interfaces:
config:
- name: ge-0/0/1
ipv4:
- address: 192.168.1.10/24
ipv6:
- address: 8d8d:8d01::1/64
- name: ge-0/0/2
ipv4:
- address: dhcp
state: replaced
# After state:
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
# description "L3 interface";
# unit 0 {
# family inet {
# address 192.168.1.10/24;
# }
# family inet6 {
# address 8d8d:8d01::1/64;
# }
# }
# }
# ge-0/0/2 {
# description "L3 interface with dhcp";
# unit 0 {
# family inet {
# dhcp;
# }
# }
# }
# ge-0/0/3 {
# description "another L3 interface";
# unit 0 {
# family inet {
# address 192.168.1.10/24;
# }
# }
# }
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after list | when changed | The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above. |
| before list | always | The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| commands list | always | The set of commands pushed to the remote device. Sample: ['command 1', 'command 2', 'command 3'] |
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/junos_l3_interfaces_module.html