Oracle XE 11.2. and MariaDB 10.1 integration on Ubuntu 14.04 and Debian systems

1) Sign up for Oracle downloads and download Oracle Express at:


- Sign up (unless already) and log in. - Accept the license agreement. - Download Oracle Database Express Edition 11g Release 2 for Linux x64 (oracle-xe-11.2.0-1.0.x86_64.rpm.zip, version numbers may change over time)

2) Prepare apt-get on your system

sudo add-apt-repository ppa:webupd8team/java
<press Enter to accept>
sudo apt-get update
sudo apt-get install oracle-java8-installer

3) After Java installation, verify the version

java -version
java version "1.8.0_121"

4) Edit /etc/bash.bashrc

Scroll to the bottom of the file and add the following lines.

export JAVA_HOME=/usr/lib/jvm/java-8-oracle
export PATH=$JAVA_HOME/bin:$PATH

Save and check:

source /etc/bash.bashrc

5) Additional packages are required, unless installed already. Run the command:

sudo apt-get install alien libaio1 unixodbc


unzip oracle-xe-11.2.0-1.0.x86_64.rpm.zip
cd Disk1/
sudo alien --scripts -d oracle-xe-11.2.0-1.0.x86_64.rpm

This step might take some time. You may proceed steps 7)-11) in the meanwhile in another terminal window.


Create a new file /sbin/chkconfig and add the following contents

# Oracle 11gR2 XE installer chkconfig for Ubuntu
if [[ ! `tail -n1 $file | grep INIT` ]]; then
echo >> $file
echo '### BEGIN INIT INFO' >> $file
echo '# Provides: OracleXE' >> $file
echo '# Required-Start: $remote_fs $syslog' >> $file
echo '# Required-Stop: $remote_fs $syslog' >> $file
echo '# Default-Start: 2 3 4 5' >> $file
echo '# Default-Stop: 0 1 6' >> $file
echo '# Short-Description: Oracle 11g Express Edition' >> $file
echo '### END INIT INFO' >> $file
update-rc.d oracle-xe defaults 80 01


sudo chmod 755 /sbin/chkconfig


Create a new file /etc/sysctl.d/60-oracle.conf

Copy and paste the following into the file. Kernel.shmmax is the maximum possible value of physical RAM in bytes. 536870912 / 1024 /1024 = 512 MB.

#Oracle 11g XE kernel parameters  
net.ipv4.ip_local_port_range=9000 65000  
kernel.sem=250 32000 100 128 


sudo service procps start
sudo sysctl -q fs.file-max
  1. This method should return the following: fs.file-max = 6815744

11) Some additional steps required

sudo ln -s /usr/bin/awk /bin/awk
mkdir /var/lock/subsys
touch /var/lock/subsys/listener

12) Install Oracle XE (should have been converted from .rpm to .deb by now)

sudo dpkg --install oracle-xe_11.2.0-2_amd64.deb


Execute the following to avoid getting a ORA-00845: MEMORY_TARGET error. Note: replace "size=4096m" with the size of your (virtual) machine RAM in MBs.

sudo rm -rf /dev/shm
sudo mkdir /dev/shm
sudo mount -t tmpfs shmfs -o size=4096m /dev/shm

14) Create the file /etc/rc2.d/S01shm_load

NOTE: replace "size=4096m" with the size of your machine RAM in MBS.

case "$1" in
start) mkdir /var/lock/subsys 2>/dev/null
touch /var/lock/subsys/listener
rm /dev/shm 2>/dev/null
mkdir /dev/shm 2>/dev/null
mount -t tmpfs shmfs -o size=4096m /dev/shm ;;
*) echo error
exit 1 ;;
sudo chmod 755 /etc/rc2.d/S01shm_load

15) Configure Oracle 11g R2 Express Edition. Default answers are probably OK.

sudo /etc/init.d/oracle-xe configure

Specify the HTTP port that will be used for Oracle Application Express [8080]:

Specify a port that will be used for the database listener [1521]:

Specify a password to be used for database accounts. Note that the same password will be used for SYS and SYSTEM. Oracle recommends the use of different passwords for each database account. This can be done after initial configuration:

Do you want Oracle Database 11g Express Edition to be started on boot (y/n) [y]:

16) Edit /etc/bash.bashrc. Add to the end of the file:

export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh`
export ORACLE_BASE=/u01/app/oracle


17) Run source command and check that the output makes sense

source /etc/bash.bashrc

18) Apply desktop icon changes and start Oracle:

sudo chmod a+x ~/Desktop/oraclexe-gettingstarted.desktop
sudo service oracle-xe start

19) Download SQL Developer package

Download Oracle SQL Developer from the Oracle site. Select the Linux RPM package: http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html

Choose the Linux RPM package.

20) Install SQL Developer

sudo alien --scripts -d sqldeveloper-
sudo dpkg --install sqldeveloper_4.
mkdir ~/.sqldeveloper

21) Run sqldeveloper:

sudo /opt/sqldeveloper/sqldeveloper.sh
  1. Tell sqldeveloper the correct Java path, if it asks for it:


- Click connections
- Add new connection
- Connection name: XE
- username: SYSTEM
- password: <your-password>

- Connection type: Basic Role: Default
- Hostname: localhost
- Port: 1521
- SID: xe


22) Install MariaDB

https://downloads.mariadb.org/mariadb/repositories/ Instructions are for Ubuntu, but choose the one that is appropriate: - Ubuntu - 14.04 LTS "trusty" - 10.1 [Stable] - choose a mirror

Run the commands given for you. For example (DO NOT COPY PASTE BELOW, CHECK WHAT THE MariaDB PAGE TELLS YOU TO DO):

sudo apt-get install software-properties-common
sudo apt-key adv --recv-keys --keyserver hkp://keyserver.ubuntu.com:80 0xcbcb082a1bb943db
sudo add-apt-repository 'deb [arch=amd64,i386,ppc64el] http://mirror.netinch.com/pub/mariadb/repo/10.1/ubuntu trusty main'
sudo apt-get update
  1. Install mariadb-server:
sudo apt-get install mariadb-server

23) Install ODBC driver


  1. MariaDB Connector/ODBC 2.0.13 Stable for Linux

Download: mariadb-connector-ODBC-2.0.13-ga-linux-x86_64.tar.gz

tar xfz mariadb-connector-odbc-2.0.13-ga-linux-x86_64.tar.gz
sudo cp -p mariadb-connector-odbc-2.0.13-ga-linux-x86_64/lib/libmaodbc.so /lib
sudo ldconfig

24) Install unixodbc and mariadb-connect engine

apt-get install unixodbc-dev
apt-get install unixodbc-bin
apt-get install unixodbc
apt-get install libodbc1
apt-get install mariadb-connect-engine-10.1

25) Edit /etc/odbcinst.ini


[Oracle ODBC driver for Oracle 11.2]
Description     = Oracle 11.2 ODBC driver
Driver          = /u01/app/oracle/product/11.2.0/xe/lib/libsqora.so.11.1

26) Edit /etc/odbc.ini

Add (check your password):

Driver          = Oracle ODBC driver for Oracle 11.2
ServerName      = //localhost:1521/xe
DSN             = XE
UserName        = SYSTEM
Password        = <your-password>

27) Test ODBC connection and add a table

isql -v XE SYSTEM <your-password>

create table t1 (i int);
insert into t1 (i) values (1);
insert into t1 (i) values (3);
insert into t1 (i) values (5);
insert into t1 (i) values (8);
select i from t1;

And you should see the rows. You can test the same with sqldeveloper, open XE connection and run select i from t1; in Worksheet.

28) Edit /etc/init.d/mysql


export JAVA_HOME=/usr/lib/jvm/java-8-oracle 
export PATH=$JAVA_HOME/bin:$PATH 
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe 
export NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh` 
export ORACLE_BASE=/u01/app/oracle 

Right after END INIT INFO. Otherwise mysqld will not find the Oracle ODBC driver.

28) Restart MariaDB

sudo /etc/init.d/mysql restart


mysql -uroot -p

USE mdb;
INSTALL SONAME 'ha_connect';

select I from t1;

You should see the previously inserted values 1,3,5 and 8. Using isql or sqldeveloper, add another rows with values 9 and 11. Remember to commit, if you are using Oracle sqldeveloper. You should now see the added values via MariaDB client (mysql-client) connection.

To be examined: inserting values to the t1 table from mariadb connection does not work. It gives a precision error from Oracle side.

Connect to MariaDB via JDBC

Download MySQL Connector from https://dev.mysql.com/downloads/connector/j/5.0.html

Select Version (for example 5.0.8)

Platform independent. Download mysql-connector-java-5.0.8.tar.gz

tar xvfz mysql-connector-java-5.0.8.tar.gz
cd mysql-connector-java-5.0.8/
sudo cp -p mysql-connector-java-5.0.8-bin.jar /usr/lib/jvm/java-8-oracle/lib/mariadb/

sudo /opt/sqldeveloper/sqldeveloper.sh

In SQL Developer choose Tools -> Preferences

Expand the "Database" option in the left hand tree

Click on "Third Party JDBC Drivers"

Click on "Add Entry..."

Navigate to your third-party driver jar file and choose OK


Click Connections -> New connection.

Add values. The following are examples:

Connection Name: MariaDB via MySQL Conn
Username: root
Password: ********
Save Password: [x]

Choose MySQL tab

Hostname: localhost
Port: 3306

Click "Test Connection". It should says Status: Success.
Click Save.
Click Connect.

You are connected. You may run commands in the Worksheet. For example:

use mdb;

show tables;

You should see the tables.

Content reproduced on this site is the property of its respective owners, and this content is not reviewed in advance by MariaDB. The views, information and opinions expressed by this content do not necessarily represent those of MariaDB or any other party.

© 2019 MariaDB
Licensed under the Creative Commons Attribution 3.0 Unported License and the GNU Free Documentation License.